main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn65hvda100qdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sn65hvda100qdrq1: viewers · Ray
package.json sn65hvda100qdrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json sn65hvda100qdrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/sn65hvda100qdrq1 · Ray
sn65hvda100qdrq1-etched.fit.json sn65hvda100qdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn65hvda100qdrq1-etched.glb sn65hvda100qdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn65hvda100qdrq1-etched.step sn65hvda100qdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn65hvda100qdrq1.glb Publish 0.1.0 · Ray
sn65hvda100qdrq1.kicad_mod Publish 0.1.0 · Ray
sn65hvda100qdrq1.kicad_sym Publish 0.1.0 · Ray
sn65hvda100qdrq1.lbr Publish 0.1.0 · Ray
sn65hvda100qdrq1.step Publish 0.1.0 · Ray

SN65HVDA100QDRQ1

Texas Instruments · LIN Transceivers · SOIC-8

SN65HVDA100QDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RXD output Open-drain output reporting LIN bus state (high for recessive near VSUP, low for dominant near ground) with output voltage range -0.3V to 5.5V and 3.5 mA output current capability at 0.4V.
2 EN input Enable input with VIL -0.3 to 0.8V (sleep mode) and VIH 2 to 5.5V (normal mode); internal pull-down resistor (125-800 kΩ) ensures sleep mode when floating.
3 NWake input High-voltage local wake-up input accepting -0.3V to 45V with low signal (<VSUP-3.3V) asserted longer than filter time tNWake (25-150 μs) triggering wake-up from sleep mode.
4 TXD input Transmit input with VIL -0.3 to 0.8V (produces dominant state) and VIH 2 to 5.5V (produces recessive state); threshold hysteresis 30-500 mV and internal pull-down resistor (125-800 kΩ).
5 GND power_in Ground connection reference point; device operates with ground shift as long as VSUP remains above 4.35V minimum operating threshold.
6 LIN bidirectional LIN bus single-wire bidirectional transceiver accepting -27V to 45V with integrated 30 kΩ responder termination and series diode, ratiometric receiver thresholds (0.4×VSUP dominant, 0.6×VSUP recessive), and ±12 kV HBM ESD protection.
7 VSUP power_in Device supply voltage with 5V to 27V operating range, absolute maximum -0.3V to 45V, 4.35V undervoltage threshold with 0.2V hysteresis, and supplies internal 30 kΩ LIN termination resistor.
8 INH output Inhibit output with RDS(on) 25-50 Ω providing low-impedance drive to VSUP in normal and standby modes, high-impedance in sleep mode for external voltage regulator control.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Interface
Pins 8

CAD (KiCad official)

  • Symbol: SN65HVDA100QDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sn65hvda100qdrq1-etched.step / sn65hvda100qdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65hvda100qdrq1.step / sn65hvda100qdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 1512f6ab6c692743, retrieved 2026-09-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF