main
History Download
Ray Publish 0.1.3 fdf1900

SN65HVD78EIMM

HGSEMI · RS-485 / RS-422 ICs · MSOP-8

SN65HVD78EIMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: with RE low, RO goes high when A-B is at least 200mV and low when A-B is at most -200mV as printed; the failsafe section and function table give the thresholds as -50mV (high) and -200mV (low).
2 RE input Receiver output enable, active low: RO is enabled when RE is low and is high-impedance when RE is high; RE high together with DE low puts the device into low-power shutdown mode.
3 DE input Driver output enable: the driver outputs are active when DE is high and high-impedance when DE is low; DE has a hot-plug input structure.
4 DI input Driver input: while DE is high, a low on DI drives A low and B high, and a high on DI drives A high and B low.
5 GND power_in Ground.
6 A bidirectional Receiver non-inverting input and driver non-inverting output.
7 B bidirectional Receiver inverting input and driver inverting output.
8 VCC power_in Positive supply: 3.15V ≤ VCC ≤ 3.45V; connect a 0.1µF capacitor to ground.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package MSOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 3.15 3.45 V 4
Differential driver output voltage (RS-422 load) VOD 2 V 图1,RL=100Ω(RS-422) 4
Differential driver output voltage (RS-485 load) VOD 1.5 V 图1,RL=54Ω(RS-485) 4
Differential driver output voltage magnitude change ΔVOD 0.2 V 图1,RL=100Ω 或 RL=54Ω 4
Driver common-mode output voltage VOC 3 V 图1,RL=100Ω 或 RL=54Ω 4
Common-mode output voltage magnitude change ΔVOC 0.2 V 图1,RL=100Ω 或 RL=54Ω 4
Driver input high voltage VIH 2 V DE, DI 5
Driver input low voltage VIL 0.8 V DE, DI 5
Driver input current IIN -1 1 μA DE, DI 5
Input current (A, B) full duplex, high side IA, IB 125 μA DE=GND, VCC=GND 或VCC, VIN=12V 5
Input current (A, B) full duplex, low side IA, IB -75 μA DE=GND, VCC=GND 或VCC, VIN=-7V 5
Output leakage current (Y, Z) full duplex, high side IO 125 μA DE=GND, VCC=GND 或VCC, VIN=12V 5
Output leakage current (Y, Z) full duplex, low side IO -100 μA DE=GND, VCC=GND 或VCC, VIN=-7V 5
Driver short-circuit output current IOSD 250 mA 0≦VOUT ≦12V 5
Driver short-circuit output current IOSD -250 mA -7≦VOUT ≦Vcc 5
Driver short-circuit foldback output current IOSDF 20 mA Vcc-1V ≦VOUT ≦Vcc+0.5V 5
Driver short-circuit foldback output current IOSDF -20 mA -0.5V ≦VOUT ≦+1V 5
Thermal shutdown temperature TTS 165 ℃ 5
Receiver differential threshold voltage VTH -200 -125 -50 mV -7V≦VCM≦12V 5
Receiver output low voltage VOL 0.4 V IO= 4mA,VID=-200mV 5
Receiver tri-state output current IOZR -1 1 μA 0≦VO≦VCC 5
Supply current (no load, DE=VCC) Icc 400 900 μA 无负载,(符号不可读)=VCC,DI=GND 或VCC,DE=VCC 6
Supply current (no load, DE=GND) Icc 330 600 μA 无负载,(符号不可读)=VCC,DI=GND 或VCC,DE=GND 6
Supply current (no load, DE=VCC, second condition) Icc 400 1000 μA 无负载,(符号不可读)=GND,DI=GND 或VCC,DE=VCC 6
Supply current (no load, DE=GND, second condition) Icc 330 800 μA 无负载,(符号不可读)=GND,DI=GND 或VCC,DE=GND 6
Standby supply current ISHDN 0.05 10 μA DE = GND,(符号不可读)= VCC 6
ESD HBM, pin to GND (RS-485 pins A, B) -16 16 kV 管脚到地 6
ESD IEC61000-4-2 air-gap discharge (RS-485 pins A, B) -16 16 kV RS-485 管脚(A、B);IEC61000-4-2 间隙放电 6
ESD IEC61000-4-2 contact discharge, half-duplex (RS-485 pins A, B) -16 16 kV RS-485 管脚(A、B);IEC61000-4-2 接触,半双工 6
Driver standby time tSHDN 50 350 700 ns 9
Receiver standby time tSHDN 50 350 700 ns 注释 4 9
Supply voltage (absolute maximum) VCC 6 V 4
Control input voltage (RE, DE) RE, DE -0.3 6 V 4
Driver input voltage DI -0.3 6 V 4
Driver output voltage A, B -7 12 V 4
Receiver input voltage A, B -7 12 V 4
Receiver output voltage RO -0.3 V 4
Operating temperature (industrial, EI grade) -40 85 ℃ SN65HVDxxEI 4
Storage temperature -65 150 ℃ 4
Lead temperature (soldering) TLEAD 260 ℃ 焊接 10s 4

CAD (KiCad official)

  • Symbol: SN65HVD78EIMM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: sn65hvd78eimm-etched.step / sn65hvd78eimm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65hvd78eimm.step / sn65hvd78eimm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (20 pp, sha256 81ed86cf3caebd1f, retrieved 2026-11-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF