main
Ray sn65hvd37dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 5653d39
{
  "schema_version": 1,
  "type": "component",
  "slug": "sn65hvd37dr",
  "title": "SN65HVD37DR",
  "brief": "Texas Instruments RS-485 / RS-422 ICs, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "sn65hvd37dr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "SN65HVD37DR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-14",
    "pin_count": 14,
    "category": "Interface",
    "subcategory": "RS-485 / RS-422 ICs",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn65hvd37.pdf",
    "parts": {
      "symbol": "sn65hvd37dr.kicad_sym",
      "footprint": "sn65hvd37dr.kicad_mod",
      "model_3d": "sn65hvd37dr-etched.glb",
      "model_3d_plain": "sn65hvd37dr.glb",
      "model_3d_step": "sn65hvd37dr-etched.step",
      "model_3d_step_plain": "sn65hvd37dr.step",
      "lbr": "sn65hvd37dr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2671494"
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "2",
        "name": "R",
        "type": "output",
        "description": "Receiver output; outputs the logic level corresponding to the bus differential input per the receiver function table, VOH ≥ 2.4V at IOH=-8mA and VOL 0.2-0.4V at IOL=8mA, goes high-impedance when RE is high or open."
      },
      {
        "number": "3",
        "name": "RE",
        "type": "input",
        "description": "Receiver enable, active low; a low level enables the R output, a high level or open (default) forces R to a high-impedance state; 5V-tolerant logic input, VIH ≥2V, VIL ≤0.8V."
      },
      {
        "number": "4",
        "name": "DE",
        "type": "input",
        "description": "Driver enable, active high; a high level enables the Y/Z differential driver outputs, a low level or open (default) disables the driver to high impedance; 5V-tolerant logic input, VIH ≥2V, VIL ≤0.8V."
      },
      {
        "number": "5",
        "name": "D",
        "type": "input",
        "description": "Driver data input; a high level drives Y high and Z low, a low level drives Y low and Z high (open input defaults to driving Y high/Z low when DE is high); 5V-tolerant logic input, VIH ≥2V, VIL ≤0.8V."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; datasheet notes that both pins 6 and 7 should be connected to ground."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; datasheet notes that both pins 6 and 7 should be connected to ground."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "9",
        "name": "Y",
        "type": "output",
        "description": "Noninverting differential driver output; |VOD| typically 1.5V-2.2V into 54-100Ω loads, output current range -60mA to 60mA, short-circuit current limited to ±250mA, part of the RS-485 bus port."
      },
      {
        "number": "10",
        "name": "Z",
        "type": "output",
        "description": "Inverting differential driver output, complementary to Y; |VOD| typically 1.5V-2.2V into 54-100Ω loads, output current range -60mA to 60mA, short-circuit current limited to ±250mA, part of the RS-485 bus port."
      },
      {
        "number": "11",
        "name": "B",
        "type": "input",
        "description": "Inverting receiver differential input; bus input voltage range -7V to 12V (separately or common mode), differential input voltage range -12V to 12V, part of the RS-485 bus port."
      },
      {
        "number": "12",
        "name": "A",
        "type": "input",
        "description": "Noninverting receiver differential input; bus input voltage range -7V to 12V (separately or common mode), differential input voltage range -12V to 12V, part of the RS-485 bus port."
      },
      {
        "number": "13",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input, 3V to 3.6V (3.3V nominal); datasheet notes that both pins 13 and 14 should be connected to the supply voltage."
      },
      {
        "number": "14",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input, 3V to 3.6V (3.3V nominal); datasheet notes that both pins 13 and 14 should be connected to the supply voltage."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Discrepancy between datasheet sources: Page 2 note (1) states 'Both pins 13 and 14 should be connect"
        ],
        "pages_sent": 20,
        "cost_usd": 0.3335,
        "at": "2026-09-23T00:04:14"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn65hvd37.pdf",
        "pages": 20,
        "sha256": "a3429080066326f1",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn65hvd37dr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          8.7,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn65hvd37dr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          8.7,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f8b272667b474c6564b6fbbdf1e9188b4afcfd67df48b6ade928473b4ca287b5",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOIC-14",
      "Category": "Interface",
      "Pins": "14"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sn65hvd37dr"
  ],
  "discovery_pitch": "SN65HVD37DR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn65hvd37dr.kicad_sym",
    "sn65hvd37dr.kicad_mod",
    "sn65hvd37dr.glb",
    "sn65hvd37dr.step",
    "sn65hvd37dr.lbr",
    "docs/hero.png",
    "docs/sn65hvd37dr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T06:28:38.992Z"
}