← Commit history

sn65hvd37dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·5653d39897 · ·parent cbdf6d8
2 files changed +90−10
package.json+48−8
@@ -59,25 +59,25 @@         "number": "2",         "name": "R",         "type": "output",-        "description": "Receiver output; outputs the logic level corresponding to the bus differential input per the receiver function table, VOH \u2265 2.4V at IOH=-8mA and VOL 0.2-0.4V at IOL=8mA, goes high-impedance when RE is high or open."+        "description": "Receiver output; outputs the logic level corresponding to the bus differential input per the receiver function table, VOH ≥ 2.4V at IOH=-8mA and VOL 0.2-0.4V at IOL=8mA, goes high-impedance when RE is high or open."       },       {         "number": "3",         "name": "RE",         "type": "input",-        "description": "Receiver enable, active low; a low level enables the R output, a high level or open (default) forces R to a high-impedance state; 5V-tolerant logic input, VIH \u22652V, VIL \u22640.8V."+        "description": "Receiver enable, active low; a low level enables the R output, a high level or open (default) forces R to a high-impedance state; 5V-tolerant logic input, VIH ≥2V, VIL ≤0.8V."       },       {         "number": "4",         "name": "DE",         "type": "input",-        "description": "Driver enable, active high; a high level enables the Y/Z differential driver outputs, a low level or open (default) disables the driver to high impedance; 5V-tolerant logic input, VIH \u22652V, VIL \u22640.8V."+        "description": "Driver enable, active high; a high level enables the Y/Z differential driver outputs, a low level or open (default) disables the driver to high impedance; 5V-tolerant logic input, VIH ≥2V, VIL ≤0.8V."       },       {         "number": "5",         "name": "D",         "type": "input",-        "description": "Driver data input; a high level drives Y high and Z low, a low level drives Y low and Z high (open input defaults to driving Y high/Z low when DE is high); 5V-tolerant logic input, VIH \u22652V, VIL \u22640.8V."+        "description": "Driver data input; a high level drives Y high and Z low, a low level drives Y low and Z high (open input defaults to driving Y high/Z low when DE is high); 5V-tolerant logic input, VIH ≥2V, VIL ≤0.8V."       },       {         "number": "6",@@ -101,13 +101,13 @@         "number": "9",         "name": "Y",         "type": "output",-        "description": "Noninverting differential driver output; |VOD| typically 1.5V-2.2V into 54-100\u03a9 loads, output current range -60mA to 60mA, short-circuit current limited to \u00b1250mA, part of the RS-485 bus port."+        "description": "Noninverting differential driver output; |VOD| typically 1.5V-2.2V into 54-100Ω loads, output current range -60mA to 60mA, short-circuit current limited to ±250mA, part of the RS-485 bus port."       },       {         "number": "10",         "name": "Z",         "type": "output",-        "description": "Inverting differential driver output, complementary to Y; |VOD| typically 1.5V-2.2V into 54-100\u03a9 loads, output current range -60mA to 60mA, short-circuit current limited to \u00b1250mA, part of the RS-485 bus port."+        "description": "Inverting differential driver output, complementary to Y; |VOD| typically 1.5V-2.2V into 54-100Ω loads, output current range -60mA to 60mA, short-circuit current limited to ±250mA, part of the RS-485 bus port."       },       {         "number": "11",@@ -168,6 +168,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "sn65hvd37dr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "sn65hvd37dr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f8b272667b474c6564b6fbbdf1e9188b4afcfd67df48b6ade928473b4ca287b5",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -153,7 +153,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "sn65hvd37dr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "sn65hvd37dr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          8.7,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f8b272667b474c6564b6fbbdf1e9188b4afcfd67df48b6ade928473b4ca287b5",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -201,4 +241,4 @@     "public": true   },   "updated_at": "2026-09-25T06:28:38.992Z"-}\ No newline at end of file+}