main
Ray Publish 0.1.0 6b3f803

SN65HVD3088EDGKR-TUDI

Tudi · RS-485 / RS-422 ICs · MSOP-8

SN65HVD3088EDGKR-TUDI from Tudi, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R output Receive data output; the receiver output that reports the differential signal on the A and B bus pins.
2 RE input Receiver enable, active low; the datasheet gives RE=Vcc as the high-impedance receiver output condition.
3 DE input Driver enable, active high; the driver is disabled when DE is at 0 V, and DE is an input with VIH of 2 V minimum and VIL of 0.8 V maximum.
4 D input Driver data input that sets the differential driver output on the bus when the driver is enabled.
5 GND power_in Local device ground, the reference potential for the device.
6 A bidirectional Driver output or receiver input, complementary to B; bus terminals are rated -7 V to 12 V with respect to network ground.
7 B bidirectional Driver output or receiver input, complementary to A; bus terminals are rated -7 V to 12 V with respect to network ground.
8 Vcc power_in Supply pin; the device requires 4.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Tudi
Package MSOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VCC (absolute maximum) Vcc -0.5 7 V 3
Voltage at A or B -9 14 V 3
Voltage at any logic pin -0.3 V 3
Receiver output current -24 24 mA 3
Voltage input, transient pulse, A and B -50 50 V through 100 (see Figure 13) 3
Junction temperature TJ 170 ℃ 3
Storage temperature Tstg -65 150 ℃ 3
Supply voltage, VCC VCC 4.5 5.5 V 4
Voltage at any bus terminal (separately or common mode) VI -7 12 V 4
High-level input voltage (D, DE, or RE inputs) VIH 2 V 4
Low-level input voltage (D, DE, or RE inputs) VIN 0 0.8 V 4
Differential input voltage VID -12 12 V 4
Output current, driver IO -60 60 mA 4
Output current, receiver IO -8 8 mA 4
Differential load resistance RL 54 60 4
Signaling rate (SN65HVD3088E) 1/tUI 20 Mbps 4
Operating free-air temperature (SN65HVD3088E, DGK and P packages) TA -40 85 5
Junction temperature TJ -40 130 5
Differential output voltage, no load VOD 3 4.3 V lo=0,No Load 6
Differential output voltage, RL=54 VOD 1.5 2.3 V RL=54 (see Figure 1) 6
Differential output voltage, RL=100 VOD 2 V RL=100 6
Differential output voltage with common-mode loading VOD 1.5 V VTEST=-7 V to 12V (see Figure 2) 6
Change in magnitude of differential output voltage -0.2 0 0.2 V See Figure 1 and Figure 2 6
Steady-state common-mode output voltage Voc(ss) 1 2.6 3 V See Figure 3 6
Change in steady-state common-mode output voltage Voc(ss) -0.1 0 0.1 V 6
Input current (D, DE) II -100 100 μA 7
Short-circuit output current los -250 250 mA -7V Vo 12V (see Figure 7) 7
Positive-going differential input threshold voltage VIT+ -85 -10 mV lo=-8 mA 7
Negative-going differential input threshold voltage VIT- -200 -115 mV lo=8mA 7
High-level output voltage VOH 4 4.6 V VID=200 mV, loH=-8 mA (see Figure 8) 7
Low-level output voltage VOL 0.15 0.4 V VID=-200 mV, lo=8 mA (see Figure 8) 7
High-impedance-state output current IOZ -1 1 μA Vo=0 or Vcc, RE=Vcc 7
Bus input current II 0.04 0.1 mA VIH=12V, Vcc=5V 7
Bus input current II 0.06 0.125 mA VIH=12V, Vcc=0V 7
Bus input current II -0.1 -0.04 mA VIH=-7V, Vcc=5V 7
Bus input current II -0.05 -0.03 mA VIH=-7V, Vcc=0V 7
High-level input current (RE) IIH -60 -30 μA VIH=2V 8
Low-level input current (RE) IIL -60 -30 μA VIL=0.8V 8
Supply current, driver and receiver enabled ICC 425 900 μA D at Vcc or open, DE at Vcc, RE at 0V, No load 8
Supply current, driver enabled, receiver disabled ICC 330 600 μA D at Vcc or open, DE at Vcc, RE at Vcc, No load 8
Supply current, receiver enabled, driver disabled ICC 300 600 μA D at Vcc or open, DE at 0V, RE at 0V, No load 8
Supply current, driver and receiver disabled ICC 0.001 2 μA D at Vcc or open, DE at 0V, RE at Vcc 8
Average power dissipation rate (SN65HVD3088E) P(AVG) 276 mW TJ=130 ℃, RL=54, Vcc=5.5V; input to D 50% duty cycle square wave at max specified signal 8
Propagation delay time, low-to-high and high-to-low-level output (driver) tPLH, tPHL 12 20 ns RL=54, CL=50pF (see Figure 4) 9
Differential output signal rise and fall time (driver) tr, tf 7 15 ns RL=54, CL=50pF (see Figure 4) 9
Pulse skew (driver) tsk(p) 1.4 2 ns RL=54, CL=50pF (see Figure 4) 9
Propagation delay time, high-impedance-to-high and high-impedance-to-low-level output (driver enable) tPZH, tPZL 13 30 ns RL=110, RE at 0V (see Figure 5 and Figure 6) 9
Propagation delay time, high-level and low-level-to-high-impedance output (driver disable) tPHZ, tPLZ 12 30 ns RL=110, RE at 0V (see Figure 5 and Figure 6) 9
Propagation delay time, shutdown-to-high and shutdown-to-low-level output tPZH(SHDN), tPZL(SHDN) 1600 2600 ns RL=110, RE at Vcc (see Figure 5) 9
Output signal rise time (receiver) tr 1.5 3 ns VID=-1.5V to 1.5V, CL=15 pF (see Figure 9) 10
Output signal fall time (receiver) tF 1.8 3 ns 10
Propagation delay time, shutdown-to-high-level output (receiver) tPZH(SHDN) 1600 3500 ns CL=15 pF, DE at 0V (see Figure 12) 10
Propagation delay time, shutdown-to-low-level output (receiver) tPZL(SHDN) 1700 3500 ns 10
Junction-to-ambient thermal resistance (DGK, VSSOP-8) RθJA 137.8 °C/W 5
Junction-to-case (top) thermal resistance (DGK, VSSOP-8) RθJC(top) 31.2 °C/W 5
Junction-to-board thermal resistance (DGK, VSSOP-8) RθJB 71.7 °C/W 5
Junction-to-top characterization parameter (DGK, VSSOP-8) ψJT 0.6 °C/W 5
Junction-to-board characterization parameter (DGK, VSSOP-8) ψJB 70.5 °C/W 5

CAD (KiCad official)

  • Symbol: SN65HVD3088EDGKR-TUDI
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: sn65hvd3088edgkr-tudi-etched.step / sn65hvd3088edgkr-tudi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65hvd3088edgkr-tudi.step / sn65hvd3088edgkr-tudi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Tudi datasheet (21 pp, sha256 de57dd39c4361cc2, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF