Generated by kicad-footprint-generator · KiCad file format 20260206
SN65HVD3088EDGKR-TUDI
Tudi · RS-485 / RS-422 ICs · MSOP-8
SN65HVD3088EDGKR-TUDI from Tudi, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receive data output; the receiver output that reports the differential signal on the A and B bus pins. |
| 2 | RE | input | Receiver enable, active low; the datasheet gives RE=Vcc as the high-impedance receiver output condition. |
| 3 | DE | input | Driver enable, active high; the driver is disabled when DE is at 0 V, and DE is an input with VIH of 2 V minimum and VIL of 0.8 V maximum. |
| 4 | D | input | Driver data input that sets the differential driver output on the bus when the driver is enabled. |
| 5 | GND | power_in | Local device ground, the reference potential for the device. |
| 6 | A | bidirectional | Driver output or receiver input, complementary to B; bus terminals are rated -7 V to 12 V with respect to network ground. |
| 7 | B | bidirectional | Driver output or receiver input, complementary to A; bus terminals are rated -7 V to 12 V with respect to network ground. |
| 8 | Vcc | power_in | Supply pin; the device requires 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Tudi |
| Package | MSOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VCC (absolute maximum) | Vcc | -0.5 | 7 | V | 3 | ||
| Voltage at A or B | -9 | 14 | V | 3 | |||
| Voltage at any logic pin | -0.3 | V | 3 | ||||
| Receiver output current | -24 | 24 | mA | 3 | |||
| Voltage input, transient pulse, A and B | -50 | 50 | V | through 100 (see Figure 13) | 3 | ||
| Junction temperature | TJ | 170 | ℃ | 3 | |||
| Storage temperature | Tstg | -65 | 150 | ℃ | 3 | ||
| Supply voltage, VCC | VCC | 4.5 | 5.5 | V | 4 | ||
| Voltage at any bus terminal (separately or common mode) | VI | -7 | 12 | V | 4 | ||
| High-level input voltage (D, DE, or RE inputs) | VIH | 2 | V | 4 | |||
| Low-level input voltage (D, DE, or RE inputs) | VIN | 0 | 0.8 | V | 4 | ||
| Differential input voltage | VID | -12 | 12 | V | 4 | ||
| Output current, driver | IO | -60 | 60 | mA | 4 | ||
| Output current, receiver | IO | -8 | 8 | mA | 4 | ||
| Differential load resistance | RL | 54 | 60 | 4 | |||
| Signaling rate (SN65HVD3088E) | 1/tUI | 20 | Mbps | 4 | |||
| Operating free-air temperature (SN65HVD3088E, DGK and P packages) | TA | -40 | 85 | 5 | |||
| Junction temperature | TJ | -40 | 130 | 5 | |||
| Differential output voltage, no load | VOD | 3 | 4.3 | V | lo=0,No Load | 6 | |
| Differential output voltage, RL=54 | VOD | 1.5 | 2.3 | V | RL=54 (see Figure 1) | 6 | |
| Differential output voltage, RL=100 | VOD | 2 | V | RL=100 | 6 | ||
| Differential output voltage with common-mode loading | VOD | 1.5 | V | VTEST=-7 V to 12V (see Figure 2) | 6 | ||
| Change in magnitude of differential output voltage | -0.2 | 0 | 0.2 | V | See Figure 1 and Figure 2 | 6 | |
| Steady-state common-mode output voltage | Voc(ss) | 1 | 2.6 | 3 | V | See Figure 3 | 6 |
| Change in steady-state common-mode output voltage | Voc(ss) | -0.1 | 0 | 0.1 | V | 6 | |
| Input current (D, DE) | II | -100 | 100 | μA | 7 | ||
| Short-circuit output current | los | -250 | 250 | mA | -7V Vo 12V (see Figure 7) | 7 | |
| Positive-going differential input threshold voltage | VIT+ | -85 | -10 | mV | lo=-8 mA | 7 | |
| Negative-going differential input threshold voltage | VIT- | -200 | -115 | mV | lo=8mA | 7 | |
| High-level output voltage | VOH | 4 | 4.6 | V | VID=200 mV, loH=-8 mA (see Figure 8) | 7 | |
| Low-level output voltage | VOL | 0.15 | 0.4 | V | VID=-200 mV, lo=8 mA (see Figure 8) | 7 | |
| High-impedance-state output current | IOZ | -1 | 1 | μA | Vo=0 or Vcc, RE=Vcc | 7 | |
| Bus input current | II | 0.04 | 0.1 | mA | VIH=12V, Vcc=5V | 7 | |
| Bus input current | II | 0.06 | 0.125 | mA | VIH=12V, Vcc=0V | 7 | |
| Bus input current | II | -0.1 | -0.04 | mA | VIH=-7V, Vcc=5V | 7 | |
| Bus input current | II | -0.05 | -0.03 | mA | VIH=-7V, Vcc=0V | 7 | |
| High-level input current (RE) | IIH | -60 | -30 | μA | VIH=2V | 8 | |
| Low-level input current (RE) | IIL | -60 | -30 | μA | VIL=0.8V | 8 | |
| Supply current, driver and receiver enabled | ICC | 425 | 900 | μA | D at Vcc or open, DE at Vcc, RE at 0V, No load | 8 | |
| Supply current, driver enabled, receiver disabled | ICC | 330 | 600 | μA | D at Vcc or open, DE at Vcc, RE at Vcc, No load | 8 | |
| Supply current, receiver enabled, driver disabled | ICC | 300 | 600 | μA | D at Vcc or open, DE at 0V, RE at 0V, No load | 8 | |
| Supply current, driver and receiver disabled | ICC | 0.001 | 2 | μA | D at Vcc or open, DE at 0V, RE at Vcc | 8 | |
| Average power dissipation rate (SN65HVD3088E) | P(AVG) | 276 | mW | TJ=130 ℃, RL=54, Vcc=5.5V; input to D 50% duty cycle square wave at max specified signal | 8 | ||
| Propagation delay time, low-to-high and high-to-low-level output (driver) | tPLH, tPHL | 12 | 20 | ns | RL=54, CL=50pF (see Figure 4) | 9 | |
| Differential output signal rise and fall time (driver) | tr, tf | 7 | 15 | ns | RL=54, CL=50pF (see Figure 4) | 9 | |
| Pulse skew (driver) | tsk(p) | 1.4 | 2 | ns | RL=54, CL=50pF (see Figure 4) | 9 | |
| Propagation delay time, high-impedance-to-high and high-impedance-to-low-level output (driver enable) | tPZH, tPZL | 13 | 30 | ns | RL=110, RE at 0V (see Figure 5 and Figure 6) | 9 | |
| Propagation delay time, high-level and low-level-to-high-impedance output (driver disable) | tPHZ, tPLZ | 12 | 30 | ns | RL=110, RE at 0V (see Figure 5 and Figure 6) | 9 | |
| Propagation delay time, shutdown-to-high and shutdown-to-low-level output | tPZH(SHDN), tPZL(SHDN) | 1600 | 2600 | ns | RL=110, RE at Vcc (see Figure 5) | 9 | |
| Output signal rise time (receiver) | tr | 1.5 | 3 | ns | VID=-1.5V to 1.5V, CL=15 pF (see Figure 9) | 10 | |
| Output signal fall time (receiver) | tF | 1.8 | 3 | ns | 10 | ||
| Propagation delay time, shutdown-to-high-level output (receiver) | tPZH(SHDN) | 1600 | 3500 | ns | CL=15 pF, DE at 0V (see Figure 12) | 10 | |
| Propagation delay time, shutdown-to-low-level output (receiver) | tPZL(SHDN) | 1700 | 3500 | ns | 10 | ||
| Junction-to-ambient thermal resistance (DGK, VSSOP-8) | RθJA | 137.8 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (DGK, VSSOP-8) | RθJC(top) | 31.2 | °C/W | 5 | |||
| Junction-to-board thermal resistance (DGK, VSSOP-8) | RθJB | 71.7 | °C/W | 5 | |||
| Junction-to-top characterization parameter (DGK, VSSOP-8) | ψJT | 0.6 | °C/W | 5 | |||
| Junction-to-board characterization parameter (DGK, VSSOP-8) | ψJB | 70.5 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
SN65HVD3088EDGKR-TUDI - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
sn65hvd3088edgkr-tudi-etched.step/sn65hvd3088edgkr-tudi-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65hvd3088edgkr-tudi.step/sn65hvd3088edgkr-tudi.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Tudi datasheet (21 pp, sha256
de57dd39c4361cc2, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).