SN65HVD3082EDGKR

{
 "schema": "adom.pads/1",
 "slug": "sn65hvd3082edgkr",
 "footprint": "VSSOP-8_2.3x2mm_P0.5mm",
 "generated_from": {
  "footprint": "VSSOP-8_2.3x2mm_P0.5mm@sha256:dca72da69de3263a",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -1.4,
   -0.75
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "VSSOP-8_2.3x2mm_P0.5mm@sha256:dca72da69de3263a"
 },
 "pad_count": 8,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.4,
    -0.75
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "R",
   "type": "output",
   "description": "Receiver data output. CMOS-level digital output that reproduces the differential bus state seen at pins A/B; fail-safe HIGH when the bus is open, shorted, or idle.",
   "is_pin1": true,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.4,
    -0.25
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "RE",
   "type": "input",
   "description": "Receiver enable, active-low digital input. Drive LOW to enable the receiver output R; drive HIGH to place R in high-impedance. Tying RE HIGH while DE is LOW puts the device in low-current shutdown (~1 nA).",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.4,
    0.25
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "DE",
   "type": "input",
   "description": "Driver enable, active-high digital input. Drive HIGH to enable the differential driver on A/B; LOW places the driver outputs in high-impedance.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.4,
    0.75
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "D",
   "type": "input",
   "description": "Driver data input. CMOS-level digital input; when the driver is enabled, a HIGH on D drives A>B and a LOW drives B>A on the RS-485 bus.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.4,
    0.75
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "GND",
   "type": "power_in",
   "description": "Local device ground / reference potential for VCC and all logic-side signals.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.4,
    0.25
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "A",
   "type": "bidirectional",
   "description": "RS-485 differential bus pin A (non-inverting). Driver output or receiver input, complementary to B. Rated for -9 V to +14 V DC and ±50 V transient (through 100 Ω), with ±15 kV HBM ESD.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.4,
    -0.25
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "B",
   "type": "bidirectional",
   "description": "RS-485 differential bus pin B (inverting). Driver output or receiver input, complementary to A. Rated for -9 V to +14 V DC and ±50 V transient (through 100 Ω), with ±15 kV HBM ESD.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.4,
    -0.75
   ],
   "rot": 0.0,
   "size": [
    1.25,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "VCC",
   "type": "power_in",
   "description": "Positive supply input, 4.5 V to 5.5 V. Bypass locally to GND with a 100-nF ceramic capacitor.",
   "is_pin1": false,
   "source": {
    "geometry": "VSSOP-8_2.3x2mm_P0.5mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}