main
Ray sn6507dgqr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 8117a50
{
  "slug": "sn6507dgqr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Management - Specialized, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "sn6507dgqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn6507dgqr.kicad_sym",
    "sn6507dgqr.kicad_mod",
    "sn6507dgqr.glb",
    "sn6507dgqr.step",
    "sn6507dgqr.lbr",
    "docs/hero.png",
    "docs/sn6507dgqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "SN6507DGQR",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Management - Specialized",
    "datasheet": "https://www.ti.com/cn/lit/ds/symlink/sn6507.pdf",
    "parts": {
      "symbol": "sn6507dgqr.kicad_sym",
      "footprint": "sn6507dgqr.kicad_mod",
      "model_3d": "sn6507dgqr-etched.glb",
      "model_3d_plain": "sn6507dgqr.glb",
      "model_3d_step": "sn6507dgqr-etched.step",
      "model_3d_step_plain": "sn6507dgqr.step",
      "lbr": "sn6507dgqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C5122398"
    },
    "pins": [
      {
        "number": "1",
        "name": "SW1",
        "type": "output",
        "description": "Open-drain output for first power MOSFET switch with 0.5A typical and 1.6A peak output current, typically connected to center-tapped transformer external terminal."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection for internal control circuits and power MOSFET; must be shorted to pin 9 on PCB for optimal emission and efficiency."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input pin for control and analog circuits with operating range 3V to 36V and maximum absolute rating of 60V."
      },
      {
        "number": "4",
        "name": "EN/UVLO",
        "type": "input",
        "description": "Enable input and programmable under-voltage lockout (UVLO) pin; device enabled when pin voltage exceeds 1.5V (typical rising threshold) and VCC exceeds 2.8V (typical)."
      },
      {
        "number": "5",
        "name": "DC",
        "type": "input",
        "description": "Duty cycle control input for line regulation; external resistor adjusts duty cycle to compensate input variations up to ±35% for maintaining constant output voltage."
      },
      {
        "number": "6",
        "name": "SR",
        "type": "input",
        "description": "Slew rate control input for SW1 and SW2 edge rate; external resistor adjusts slew rate from 198 V/µs to 583 V/µs depending on VCC and resistor selection."
      },
      {
        "number": "7",
        "name": "CLK",
        "type": "input",
        "description": "Clock input for external synchronization or programmable switching frequency from 100 kHz to 2 MHz via external resistor, or short to GND for default 1MHz."
      },
      {
        "number": "8",
        "name": "SS/ILIM",
        "type": "input",
        "description": "Soft start and current limit control input; external capacitor (0.05-10µF) sets soft start time and external resistor (18-261kΩ) sets current limit from 100mA to 1.59A."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection for internal control circuits and power MOSFET; must be shorted to pin 2 on PCB for optimal emission and efficiency."
      },
      {
        "number": "10",
        "name": "SW2",
        "type": "output",
        "description": "Open-drain output for second power MOSFET switch with 0.5A typical and 1.6A peak output current, typically connected to center-tapped transformer external terminal."
      },
      {
        "number": "11",
        "name": "PowerPAD",
        "type": "power_in",
        "description": "Thermal pad for ground and power dissipation; GND pins (2 and 9) must be electrically connected to ground plane on PCB for proper operation and thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 42,
        "cost_usd": 0.4271,
        "at": "2026-09-24T10:00:02"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/ds/symlink/sn6507.pdf",
        "pages": 42,
        "sha256": "a964bdb06e3794dc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn6507dgqr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn6507dgqr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a06163fa0907ae3712d675110eeeee68c3583f2b697d04671b06b609daf06a68",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}