main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn6507dgqr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sn6507dgqr: viewers · Ray
package.json sn6507dgqr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json sn6507dgqr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/sn6507dgqr · Ray
sn6507dgqr-etched.fit.json sn6507dgqr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn6507dgqr-etched.glb sn6507dgqr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn6507dgqr-etched.step sn6507dgqr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn6507dgqr.glb Publish 0.1.0 · Ray
sn6507dgqr.kicad_mod Publish 0.1.0 · Ray
sn6507dgqr.kicad_sym Publish 0.1.0 · Ray
sn6507dgqr.lbr Publish 0.1.0 · Ray
sn6507dgqr.step Publish 0.1.0 · Ray

SN6507DGQR

Texas Instruments · Power Management - Specialized · MSOP-10-EP

SN6507DGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW1 output Open-drain output for first power MOSFET switch with 0.5A typical and 1.6A peak output current, typically connected to center-tapped transformer external terminal.
2 GND power_in Ground connection for internal control circuits and power MOSFET; must be shorted to pin 9 on PCB for optimal emission and efficiency.
3 VCC power_in Power supply input pin for control and analog circuits with operating range 3V to 36V and maximum absolute rating of 60V.
4 EN/UVLO input Enable input and programmable under-voltage lockout (UVLO) pin; device enabled when pin voltage exceeds 1.5V (typical rising threshold) and VCC exceeds 2.8V (typical).
5 DC input Duty cycle control input for line regulation; external resistor adjusts duty cycle to compensate input variations up to ±35% for maintaining constant output voltage.
6 SR input Slew rate control input for SW1 and SW2 edge rate; external resistor adjusts slew rate from 198 V/µs to 583 V/µs depending on VCC and resistor selection.
7 CLK input Clock input for external synchronization or programmable switching frequency from 100 kHz to 2 MHz via external resistor, or short to GND for default 1MHz.
8 SS/ILIM input Soft start and current limit control input; external capacitor (0.05-10µF) sets soft start time and external resistor (18-261kΩ) sets current limit from 100mA to 1.59A.
9 GND power_in Ground connection for internal control circuits and power MOSFET; must be shorted to pin 2 on PCB for optimal emission and efficiency.
10 SW2 output Open-drain output for second power MOSFET switch with 0.5A typical and 1.6A peak output current, typically connected to center-tapped transformer external terminal.
11 PowerPAD power_in Thermal pad for ground and power dissipation; GND pins (2 and 9) must be electrically connected to ground plane on PCB for proper operation and thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-10-EP
Category Power Management (PMIC)
Pins 11

CAD (KiCad official)

  • Symbol: SN6507DGQR
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: sn6507dgqr-etched.step / sn6507dgqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn6507dgqr.step / sn6507dgqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 a964bdb06e3794dc, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF