SN6505DQDBVRQ1

{
  "slug": "sn6505dqdbvrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Management - Specialized, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "sn6505dqdbvrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn6505dqdbvrq1.kicad_sym",
    "sn6505dqdbvrq1.kicad_mod",
    "sn6505dqdbvrq1.glb",
    "sn6505dqdbvrq1.step",
    "sn6505dqdbvrq1.lbr",
    "docs/hero.png",
    "docs/sn6505dqdbvrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn6505dqdbvrq1-hero.glb",
    "sn6505dqdbvrq1-hero.overlay.json",
    "sn6505dqdbvrq1-etched.glb"
  ],
  "component": {
    "mpn": "SN6505DQDBVRQ1",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Management - Specialized",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn6505d-q1.pdf",
    "parts": {
      "symbol": "sn6505dqdbvrq1.kicad_sym",
      "footprint": "sn6505dqdbvrq1.kicad_mod",
      "model_3d": "sn6505dqdbvrq1-hero.glb",
      "model_3d_plain": "sn6505dqdbvrq1-etched.glb",
      "model_3d_step": "sn6505dqdbvrq1-etched.step",
      "model_3d_step_plain": "sn6505dqdbvrq1.step",
      "lbr": "sn6505dqdbvrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2156060",
      "digikey": "296-SN6505DQDBVRQ1TR-ND",
      "mouser": "595-SN6505DQDBVRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-11-06T01:13:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-SN6505DQDBVRQ1TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-SN6505DQDBVRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "D1",
        "type": "output",
        "description": "Open drain output of the first power MOSFETs, typically connected to the outer terminals of the center tap transformer, with external traces kept short because large currents flow through this pin."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Device supply pin that should be bypassed with a 4.7 μF or greater, low ESR capacitor, and an internal undervoltage lockout trips and turns both outputs off when VCC ≤ 2.25 V."
      },
      {
        "number": "3",
        "name": "D2",
        "type": "output",
        "description": "Open drain output of the second power MOSFETs, typically connected to the outer terminals of the center tap transformer, with external traces kept short because large currents flow through this pin."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connected to the source of the power MOSFET switches via an internal sense circuit, which must be connected to a low-inductance quality ground plane because large currents flow through it."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable pin that turns the device on or off, where grounding or leaving it floating disables all internal circuitry and it should be tied directly to VCC if unused."
      },
      {
        "number": "6",
        "name": "CLK",
        "type": "input",
        "description": "Clock input used to run the device with an external clock, internally pulled down to GND, and the device automatically shifts to internal clock if no valid clock is detected on this pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 7,
        "cost_usd": 0.0108,
        "at": "2026-11-06T01:13:12"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn6505d-q1.pdf",
        "pages": 40,
        "sha256": "3c8af11607815139",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn6505dqdbvrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",
        "checked": "2026-11-06",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn6505dqdbvrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c0246b4bdd049e298d0bb31a5d3bc8aede2ba97a1f242a04263bdac765621f6a",
        "checked": "2026-11-06",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}