main
Ray Publish 0.1.0 7b2eb48

SM9333-BCE-S-125-000

Silicon Microstructures(SMI) · Pressure Sensors · SOIC-16

SM9333-BCE-S-125-000 from Silicon Microstructures(SMI), in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect; the datasheet says not to connect to NC pins.
2 NC unconnected No connect; the datasheet says not to connect to NC pins.
3 NC unconnected No connect; the datasheet says not to connect to NC pins.
4 NC unconnected No connect; the datasheet says not to connect to NC pins.
5 VSS power_in Supply ground pin listed in the package pin table; the datasheet gives no further electrical limits for this pin.
6 VDD power_in Supply input; the SM9333/SM9336 recommended supply is 3.0 V to 3.6 V (3.3 V typical), and the device can operate up to 5 V per the functional description.
7 NC unconnected No connect; the datasheet says not to connect to NC pins.
8 NC unconnected No connect; the datasheet says not to connect to NC pins.
9 NC unconnected No connect; the datasheet says not to connect to NC pins.
10 SDA bidirectional I2C data line; the low-level input is 0.3 V to 0.9 V max, the high-level input is 0.8 x VDD to VDD+0.3 V, and the output low is at most 0.4 V at 3 mA, with a recommended 4.7 kOhm pull-up (not tested in production).
11 SCL input I2C clock input, up to 400 kHz, with the same input thresholds as SDA; a rising edge on SCL wakes the device from sleep mode.
12 NC unconnected No connect; the datasheet says not to connect to NC pins.
13 GND power_in Labeled GND (ASIC test pin) in the package pin table; the datasheet gives no further function or electrical limit for it.
14 NC unconnected No connect; the datasheet says not to connect to NC pins.
15 NC unconnected No connect; the datasheet says not to connect to NC pins.
16 NC unconnected No connect; the datasheet says not to connect to NC pins.

Key specifications

Parameter Value
Manufacturer Silicon Microstructures(SMI)
Package SOIC-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 3 5.5 V 2
Digital IO Voltage VIO,DIG -0.3 V 2
Max Digital IO Current (DC) IIO,DIG -10 10 mA 2
Storage Temperature TSTG -40 125 °C 2
ESD HBM Protection at all Pins VESD(HBM) -2 2 kV 2
Supply Voltage (SM9333/SM9336) VVDD 3 3.3 3.6 V SM9333/SM9336 3
Low level input voltage at SDA, SCL VIN,I2C,lo -0.3 0.9 V 3
Compensated Temperature TCOMP -20 85 °C 3
Operating Temperature TA -20 85 °C 3
Supply Current at 3.3V (SM9333/SM9336) IVDD3p3 3.3 3.8 mA Continuous operation (note e) 3
Digital Output Total Error Band after Autozero (SM9333) ACCAZ -1.25 0.2 1.25 %FS After autozero (notes f, g, h) 3
Digital Output Total Error Band (SM9333) ACC -2.75 2.75 %FS Overall operating conditions, dry clean air (note f) 3
SDA output low voltage VSDA,OL 0 0.4 V ISDA = 3 mA 4
Low-to-High transition threshold (pins SA0, SCL) VSDA,LH 0.5 0.6 0.7 VDD Pins SA0, SCL 4
High-to-Low transition threshold (pins SA0, SCL) VSDA,HL 0.3 0.4 0.5 VDD Pins SA0, SCL 4
Digital Pressure Output @ PMIN OUTMIN -26215 Counts 3
Digital Pressure Output @ PMAX OUTMAX 26214 Counts 3
Digital Full Scale Span FS 52429 Counts 3
Resolution (Digital Output) 16 Bits 3
Update Rate 2000 Hz 3
Bandwidth BW 20 Hz 3
Position Sensitivity SG 0.1 %FS/g 3
Power-up time tUP 18 ms From supply VDD > 3.0 V to output settled to 63% of final value (not tested in production) 3
Step response time tRESP 18 ms Pressure step response; settled to 63% of final value (not tested in production) 3
Step response settling time tSETTLE 45 ms Pressure step response; output settled to full total error band (not tested in production) 3
I2C clock frequency fSCL 400 kHz Not tested in production 4
Bus free time between a START and STOP condition tBUSF 1300 ns Not tested in production 4
Clock low time tLO 1300 ns Not tested in production 4
Clock high time tHI 600 ns Not tested in production 4
START condition hold time tSH 100 ns Not tested in production 4
Data setup time tSU 100 ns Not tested in production 4
Data hold time tH 0 ns Not tested in production 4
Setup time for repeated START condition tRSH 600 ns Not tested in production 4
Setup time for STOP condition tPSU 600 ns Not tested in production 4
Rise time of SDA and SCL signals tR 300 ns Not tested in production 4
Fall time of SDA and SCL signals tF 300 ns Not tested in production 4

CAD (KiCad official)

  • Symbol: SM9333-BCE-S-125-000
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: sm9333-bce-s-125-000-etched.step / sm9333-bce-s-125-000-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sm9333-bce-s-125-000.step / sm9333-bce-s-125-000.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Silicon Microstructures(SMI) datasheet (19 pp, sha256 9377f14fec24b658, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF