Generated by kicad-footprint-generator · KiCad file format 20260206
SM9333-BCE-S-125-000
Silicon Microstructures(SMI) · Pressure Sensors · SOIC-16
SM9333-BCE-S-125-000 from Silicon Microstructures(SMI), in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
| 2 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
| 3 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
| 4 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
| 5 | VSS | power_in | Supply ground pin listed in the package pin table; the datasheet gives no further electrical limits for this pin. |
| 6 | VDD | power_in | Supply input; the SM9333/SM9336 recommended supply is 3.0 V to 3.6 V (3.3 V typical), and the device can operate up to 5 V per the functional description. |
| 7 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
| 8 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
| 9 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
| 10 | SDA | bidirectional | I2C data line; the low-level input is 0.3 V to 0.9 V max, the high-level input is 0.8 x VDD to VDD+0.3 V, and the output low is at most 0.4 V at 3 mA, with a recommended 4.7 kOhm pull-up (not tested in production). |
| 11 | SCL | input | I2C clock input, up to 400 kHz, with the same input thresholds as SDA; a rising edge on SCL wakes the device from sleep mode. |
| 12 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
| 13 | GND | power_in | Labeled GND (ASIC test pin) in the package pin table; the datasheet gives no further function or electrical limit for it. |
| 14 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
| 15 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
| 16 | NC | unconnected | No connect; the datasheet says not to connect to NC pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silicon Microstructures(SMI) |
| Package | SOIC-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | 5.5 | V | 2 | ||
| Digital IO Voltage | VIO,DIG | -0.3 | V | 2 | |||
| Max Digital IO Current (DC) | IIO,DIG | -10 | 10 | mA | 2 | ||
| Storage Temperature | TSTG | -40 | 125 | °C | 2 | ||
| ESD HBM Protection at all Pins | VESD(HBM) | -2 | 2 | kV | 2 | ||
| Supply Voltage (SM9333/SM9336) | VVDD | 3 | 3.3 | 3.6 | V | SM9333/SM9336 | 3 |
| Low level input voltage at SDA, SCL | VIN,I2C,lo | -0.3 | 0.9 | V | 3 | ||
| Compensated Temperature | TCOMP | -20 | 85 | °C | 3 | ||
| Operating Temperature | TA | -20 | 85 | °C | 3 | ||
| Supply Current at 3.3V (SM9333/SM9336) | IVDD3p3 | 3.3 | 3.8 | mA | Continuous operation (note e) | 3 | |
| Digital Output Total Error Band after Autozero (SM9333) | ACCAZ | -1.25 | 0.2 | 1.25 | %FS | After autozero (notes f, g, h) | 3 |
| Digital Output Total Error Band (SM9333) | ACC | -2.75 | 2.75 | %FS | Overall operating conditions, dry clean air (note f) | 3 | |
| SDA output low voltage | VSDA,OL | 0 | 0.4 | V | ISDA = 3 mA | 4 | |
| Low-to-High transition threshold (pins SA0, SCL) | VSDA,LH | 0.5 | 0.6 | 0.7 | VDD | Pins SA0, SCL | 4 |
| High-to-Low transition threshold (pins SA0, SCL) | VSDA,HL | 0.3 | 0.4 | 0.5 | VDD | Pins SA0, SCL | 4 |
| Digital Pressure Output @ PMIN | OUTMIN | -26215 | Counts | 3 | |||
| Digital Pressure Output @ PMAX | OUTMAX | 26214 | Counts | 3 | |||
| Digital Full Scale Span | FS | 52429 | Counts | 3 | |||
| Resolution (Digital Output) | 16 | Bits | 3 | ||||
| Update Rate | 2000 | Hz | 3 | ||||
| Bandwidth | BW | 20 | Hz | 3 | |||
| Position Sensitivity | SG | 0.1 | %FS/g | 3 | |||
| Power-up time | tUP | 18 | ms | From supply VDD > 3.0 V to output settled to 63% of final value (not tested in production) | 3 | ||
| Step response time | tRESP | 18 | ms | Pressure step response; settled to 63% of final value (not tested in production) | 3 | ||
| Step response settling time | tSETTLE | 45 | ms | Pressure step response; output settled to full total error band (not tested in production) | 3 | ||
| I2C clock frequency | fSCL | 400 | kHz | Not tested in production | 4 | ||
| Bus free time between a START and STOP condition | tBUSF | 1300 | ns | Not tested in production | 4 | ||
| Clock low time | tLO | 1300 | ns | Not tested in production | 4 | ||
| Clock high time | tHI | 600 | ns | Not tested in production | 4 | ||
| START condition hold time | tSH | 100 | ns | Not tested in production | 4 | ||
| Data setup time | tSU | 100 | ns | Not tested in production | 4 | ||
| Data hold time | tH | 0 | ns | Not tested in production | 4 | ||
| Setup time for repeated START condition | tRSH | 600 | ns | Not tested in production | 4 | ||
| Setup time for STOP condition | tPSU | 600 | ns | Not tested in production | 4 | ||
| Rise time of SDA and SCL signals | tR | 300 | ns | Not tested in production | 4 | ||
| Fall time of SDA and SCL signals | tF | 300 | ns | Not tested in production | 4 |
CAD (KiCad official)
- Symbol:
SM9333-BCE-S-125-000 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sm9333-bce-s-125-000-etched.step/sm9333-bce-s-125-000-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sm9333-bce-s-125-000.step/sm9333-bce-s-125-000.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Silicon Microstructures(SMI) datasheet (19 pp, sha256
9377f14fec24b658, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).