main
Ray Publish 0.1.0 42e5791
{
  "slug": "slmi332cg-dg",
  "version": "0.1.0",
  "type": "component",
  "description": "Sillumin Gate Drive ICs, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "slmi332cg-dg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "slmi332cg-dg.kicad_sym",
    "slmi332cg-dg.kicad_mod",
    "slmi332cg-dg.glb",
    "slmi332cg-dg.step",
    "slmi332cg-dg.lbr",
    "docs/hero.png",
    "docs/slmi332cg-dg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "slmi332cg-dg-hero.glb",
    "slmi332cg-dg-hero.overlay.json"
  ],
  "component": {
    "mpn": "SLMi332CG-DG",
    "manufacturer": "Sillumin",
    "package": "SOP-16-300mil",
    "pin_count": 16,
    "category": "Power Management",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/6e02ecada0dc43b7540d670413fa0f73.pdf",
    "parts": {
      "symbol": "slmi332cg-dg.kicad_sym",
      "footprint": "slmi332cg-dg.kicad_mod",
      "model_3d": "slmi332cg-dg-hero.glb",
      "model_3d_plain": "slmi332cg-dg.glb",
      "model_3d_step": "slmi332cg-dg-etched.step",
      "model_3d_step_plain": "slmi332cg-dg.step",
      "lbr": "slmi332cg-dg.lbr"
    },
    "distributor_links": {
      "lcsc": "C22381784"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T09:00:14Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VS",
        "type": "power_in",
        "description": "Input-side ground reference for VCC1 and the FAULT output, and the reference for the VCC1 supply range of 3 V to 18 V."
      },
      {
        "number": "2",
        "name": "VCC1",
        "type": "power_in",
        "description": "Positive input-side supply, recommended 3 V to 18 V relative to VS (absolute maximum 20 V), and UVLO on this pin only disables the FAULT pin function below about 2.7 V rising."
      },
      {
        "number": "3",
        "name": "FAULT",
        "type": "output",
        "description": "Isolated fault output on the input side, open drain and active low, pulled low when DESAT detects an IGBT fault and not reset automatically (absolute maximum 20 V relative to VS)."
      },
      {
        "number": "4",
        "name": "VS",
        "type": "power_in",
        "description": "Input-side ground, internally tied to pin 1 as printed, and the common input ground reference for the isolator."
      },
      {
        "number": "5",
        "name": "CATHODE",
        "type": "input",
        "description": "Cathode of the input LED; the input forward current when on is recommended at 7 mA to 16 mA and reverse voltage is limited to 30 V."
      },
      {
        "number": "6",
        "name": "ANODE",
        "type": "input",
        "description": "Anode of the input LED; recommended anode-to-cathode voltage when off is -30 V to 0.9 V."
      },
      {
        "number": "7",
        "name": "ANODE",
        "type": "input",
        "description": "Anode of the input LED (second anode pin, internally tied to pin 6 as printed); same limits as pin 6."
      },
      {
        "number": "8",
        "name": "CATHODE",
        "type": "input",
        "description": "Cathode of the input LED (second cathode pin, internally tied to pin 5 as printed); same limits as pin 5."
      },
      {
        "number": "9",
        "name": "VEE",
        "type": "power_in",
        "description": "Negative output-side supply, the reference for VCC2 (14 V to 40 V) and the clamp-low level of the gate drive output."
      },
      {
        "number": "10",
        "name": "VCLAMP",
        "type": "input",
        "description": "Miller clamp sense pin, which activates the clamp when it falls below about 2 V relative to VEE and must be connected to VOUT to use the soft turn-off feature (absolute maximum 45 V)."
      },
      {
        "number": "11",
        "name": "VOUT",
        "type": "output",
        "description": "Gate drive output that sources and sinks up to 2.5 A peak to drive the IGBT gate, with output voltage limited between VEE and VCC2."
      },
      {
        "number": "12",
        "name": "VEE",
        "type": "power_in",
        "description": "Negative output-side supply (second VEE pin, internally tied to pin 9 as printed), used as the output-stage ground reference."
      },
      {
        "number": "13",
        "name": "VCC2",
        "type": "power_in",
        "description": "Positive output-side supply, recommended 14 V to 40 V relative to VEE, with UVLO that forces VOUT low when below about 10.3 V falling."
      },
      {
        "number": "14",
        "name": "DESAT",
        "type": "input",
        "description": "Desaturation voltage input monitoring IGBT VCE, with a trip threshold of 6.5 V (no suffix H) or 9 V (suffix H) and to be connected to VE if not used."
      },
      {
        "number": "15",
        "name": "VLED",
        "type": "passive",
        "description": "For internal test only; the datasheet suggests connecting it to VEE."
      },
      {
        "number": "16",
        "name": "VE",
        "type": "power_in",
        "description": "Common IGBT emitter output-side reference, with VE to VEE recommended at 0 V to 15 V and the DESAT absolute maximum referenced to this pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The package hint says SOP-16-300mil, but the datasheet names the package only as SOP16W (wide body, ; Pin types are inferred because the datasheet gives no ERC classes. Pin 3 FAULT is open drain per the; Pin names repeat as printed: VS on pins 1 and 4, VEE on pins 9 and 12, ANODE on pins 6 and 7, CATHOD"
        ],
        "pages_sent": 16,
        "cost_usd": 0.086,
        "at": "2026-11-13T09:00:01"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/6e02ecada0dc43b7540d670413fa0f73.pdf",
        "pages": 16,
        "sha256": "a0818e7c2d1c6da6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "slmi332cg-dg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.31,
          12.8,
          2.54
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "da632621486d655929fd0dc27c17af22838f52a08d3e7e93d3848a01d9b04637",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "slmi332cg-dg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.31,
          12.8,
          2.54
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "500970a77432f52da696e40d031972d7b6ea463a9921ffd6bb93914c24a8ec7a",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}