main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers slmi332cg-dg: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
slmi332cg-dg-etched.glb slmi332cg-dg: factory component page (tier=lcsc) · Ray
slmi332cg-dg-etched.step slmi332cg-dg: factory component page (tier=lcsc) · Ray
slmi332cg-dg-hero.glb slmi332cg-dg: hero GLB from the etched model (keeps the MPN mark) · Ray
slmi332cg-dg-hero.overlay.json slmi332cg-dg: hero GLB from the etched model (keeps the MPN mark) · Ray
slmi332cg-dg.glb Publish 0.1.0 · Ray
slmi332cg-dg.kicad_mod Publish 0.1.0 · Ray
slmi332cg-dg.kicad_sym Publish 0.1.0 · Ray
slmi332cg-dg.lbr Publish 0.1.0 · Ray
slmi332cg-dg.step Publish 0.1.0 · Ray

SLMi332CG-DG

Sillumin · Gate Drive ICs · SOP-16-300mil

SLMi332CG-DG from Sillumin, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VS power_in Input-side ground reference for VCC1 and the FAULT output, and the reference for the VCC1 supply range of 3 V to 18 V.
2 VCC1 power_in Positive input-side supply, recommended 3 V to 18 V relative to VS (absolute maximum 20 V), and UVLO on this pin only disables the FAULT pin function below about 2.7 V rising.
3 FAULT output Isolated fault output on the input side, open drain and active low, pulled low when DESAT detects an IGBT fault and not reset automatically (absolute maximum 20 V relative to VS).
4 VS power_in Input-side ground, internally tied to pin 1 as printed, and the common input ground reference for the isolator.
5 CATHODE input Cathode of the input LED; the input forward current when on is recommended at 7 mA to 16 mA and reverse voltage is limited to 30 V.
6 ANODE input Anode of the input LED; recommended anode-to-cathode voltage when off is -30 V to 0.9 V.
7 ANODE input Anode of the input LED (second anode pin, internally tied to pin 6 as printed); same limits as pin 6.
8 CATHODE input Cathode of the input LED (second cathode pin, internally tied to pin 5 as printed); same limits as pin 5.
9 VEE power_in Negative output-side supply, the reference for VCC2 (14 V to 40 V) and the clamp-low level of the gate drive output.
10 VCLAMP input Miller clamp sense pin, which activates the clamp when it falls below about 2 V relative to VEE and must be connected to VOUT to use the soft turn-off feature (absolute maximum 45 V).
11 VOUT output Gate drive output that sources and sinks up to 2.5 A peak to drive the IGBT gate, with output voltage limited between VEE and VCC2.
12 VEE power_in Negative output-side supply (second VEE pin, internally tied to pin 9 as printed), used as the output-stage ground reference.
13 VCC2 power_in Positive output-side supply, recommended 14 V to 40 V relative to VEE, with UVLO that forces VOUT low when below about 10.3 V falling.
14 DESAT input Desaturation voltage input monitoring IGBT VCE, with a trip threshold of 6.5 V (no suffix H) or 9 V (suffix H) and to be connected to VE if not used.
15 VLED passive For internal test only; the datasheet suggests connecting it to VEE.
16 VE power_in Common IGBT emitter output-side reference, with VE to VEE recommended at 0 V to 15 V and the DESAT absolute maximum referenced to this pin.

Key specifications

Parameter Value
Manufacturer Sillumin
Package SOP-16-300mil
Category Power Management
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Average Input Current IF(AVG) 25 mA 6
Reverse Input Voltage VR 30 V 6
Input Side Supply Voltage VCC1 -VS -0.5 20 V 6
Output Supply Voltage VCC2 -VEE -0.5 45 V 6
Negative Output Supply Voltage VE -VEE -0.5 20 V 6
Positive Output Supply Voltage (max is 45-(VE-VEE), expression not converted) VCC2 -VE -0.5 V 6
Miller Clamping Voltage VCLAMP - VEE -0.5 45 V 6
Fault pin Voltage VFAULT - VS -0.5 20 V 6
Junction Temperature TJ -40 150 °C 6
Storage Temperature TS -55 150 °C 6
Input Side Supply Voltage (recommended) VCC1 -VS 3 18 V 6
Output Supply Voltage (recommended) VCC2 -VEE 14 40 V 6
Negative Output Supply Voltage (recommended) VE-VEE 0 15 V 6
Positive Output Supply Voltage (recommended; max is 40-(VE-VEE), expression not converted) VCC2 -VE 14 V 6
Input Diode Forward Current (Diode ON) IF(ON) 7 16 mA 6
Anode Voltage - Cathode Voltage (Diode OFF) VF(OFF) -30 0.9 V 6
Junction Temperature (recommended) TJ -40 150 °C 6
Ambient Temperature TA -40 125 °C 6
Under Voltage Lockout Rising on VCC2 VUVLO2_R 10.5 11.6 12.5 V 10
Under Voltage Lockout Falling on VCC2 VUVLO2_F 9.2 10.3 11.1 V 10
Propagation delay, Low to High tPLH 80 120 ns CLOAD=1nF, fsw=20kHz, (50% Duty Cycle), VCC2=15V 11
Propagation delay, High to Low tPHL 80 120 ns 11
Output High Level Common Mode Transient Immunity CMTIH 150 kV/us IF=10mA, VCM=1000V, VCC2=15V, TA=25°C 11
Output Low Level Common Mode Transient Immunity CMTIL 150 kV/us VF=0V, VCM=1000V, VCC2= 15V, TA=25°C 11
Junction to ambient thermal resistance RθJA 100 °C/W JESD51-3 low effective thermal conductivity test board 6
Junction to case (top) thermal resistance RθJC(TOP) 40 °C/W JESD51-3 low effective thermal conductivity test board 6
Input Forward Threshold Current Low to High IFLH 2.2 mA 9
Input Forward Voltage VF 2.2 V IF=10mA 9
Temp Coefficient of Input Forward Voltage VF/T 0.5 mV/°C IF=10mA 9
Input Reverse Breakdown Voltage VR 30 V IR=10uA 9
Clamp Pin Threshold Voltage VCLAMP 2 V 9
DESAT Threshold VDESAT 6.5 V Without suffix H 9
DESAT Blank Charging Current ICHG 0.22 mA VDESAT=2V 9
DESAT Blank Discharging Current IDSCHG 33 mA VDESAT=7V 9
FAULT Output Low Voltage VFT_LOW 0.1 V IFAULT=1mA, VCC1=5V 9
FAULT Pin Leakage Current IFT_LK 0.1 uA VFAULT=5V, VCC1=5V 9
High Level Peak Output Current IOH 2.5 A IF=10mA, CVCC2=10uF, CLOAD=220nF 9
Low Level Peak Output Current IOL 2.5 A IF=10mA, CVCC2=10uF, CLOAD=220nF 9
Clamp Low Sink Current ICL 1.67 A 9
Low Level Output Current During Fault Condition IOLF 0.19 A 9
High Level Output Voltage VOH 60 mV IF=10mA, IO=-20mA 9
Low Level Output Voltage VOL 30 mV VF=0V, IO=20mA 9
Under Voltage Lockout Rising on VCC1 VUVLO1_R 2.7 V 9
Under Voltage Lockout Falling on VCC1 VUVLO1_F 2.5 V 9
Under Voltage Lockout Hysteresis on VCC1 VUVLO1_HYS 0.2 V 10
Under Voltage Lockout Hysteresis on VCC2 VUVLO2_HYS 1.3 V 10
Turn on rise time tr 28 ns 11
Turn off fall time tf 25 ns 11
Pulse Width Distortion tPWD 35 ns 11
UVLO Recovery Delay tUVLO_REC 30 us VCC2 Rising from 0V to 15V 11
DESAT to 90% VOUT Delay tDESAT(90%) 0.15 us CBLANK=100pF, CLOAD=10nF 11
DESAT to 10% VOUT Delay tDESAT(10%) 0.5 us 11
DESAT Input Mute tDESAT(MUTE) 8 us 11
DESAT to DESAT Low Propagation Delay tDESAT(LOW) 0.2 us 11
DESAT to FAULT Low Delay tDESAT(FAULT) 0.3 us 11
RESET to High Level FAULT Signal Delay tRESET(FAULT) 1 us 11
Capacitance (Input Side to Output Side) CIO 1.6 pF 7
Input Capacitance CIN 30 pF 7

CAD (KiCad official)

  • Symbol: SLMi332CG-DG
  • Footprint: Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm
  • 3D model: SOP-16-300mil (KiCad packages3D, STEP)
  • 3D model files: slmi332cg-dg-etched.step / slmi332cg-dg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); slmi332cg-dg.step / slmi332cg-dg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sillumin datasheet (16 pp, sha256 a0818e7c2d1c6da6, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF