SLM6900

{
 "schema": "adom.pads/1",
 "slug": "slm6900",
 "footprint": "TSSOP-14_4.4x5mm_P0.65mm",
 "generated_from": {
  "footprint": "TSSOP-14_4.4x5mm_P0.65mm@sha256:e4bf82cea6d3b325",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.8625,
   -1.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TSSOP-14_4.4x5mm_P0.65mm@sha256:e4bf82cea6d3b325"
 },
 "pad_count": 14,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "DRV",
   "type": "output",
   "description": "External PMOS gate drive output. The voltage is clamped by GVC to VCC-6.3V (typ.), allowing a low-VGS PMOS to be used for improved efficiency and lower cost. Switches at the 300 kHz oscillator frequency.",
   "is_pin1": true,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "PVCC",
   "type": "power_in",
   "description": "Gate driver supply input. Supplies the DRV output stage; tied to VCC in typical applications.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "VCC",
   "type": "power_in",
   "description": "Chip supply input. Operating input supply range 6.8 V to 28 V (absolute max VIN 30 V continuous / 45 V inrush).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "NCHRG",
   "type": "output",
   "description": "Open-drain charge status indicator (typically drives a red LED). Pulled low while charging is in progress (VNCHRG ~0.3 V typ at 5 mA), high-impedance otherwise. Pulses at 1-4 Hz when the battery is disconnected.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "NSTDBY",
   "type": "output",
   "description": "Open-drain charge-done status indicator (typically drives a green LED). Pulled low when the battery is fully charged (VNSTDBY ~0.3 V typ at 5 mA), high-impedance otherwise.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "NTC",
   "type": "input",
   "description": "Battery temperature detection input. Sources ~50 uA (45-55 uA) into an external NTC thermistor (10 kΩ @ 25°C typical) referenced to GND. Suspends charging outside the 190 mV low / 1.46 V high thresholds. Leave floating or tie to VCC to disable; tying to GND disables charging.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "SEL",
   "type": "input",
   "description": "Battery output voltage select. Tie to GND for 3-cell mode (12.6 V float), tie to VCC for 4-cell mode (16.8 V float), or leave floating to use an external FB divider (VFB = 1.205 V reference).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "COMP",
   "type": "passive",
   "description": "Loop stability compensation node. Connect a series R-C (e.g., 120 Ω / 220 nF) to GND close to the IC.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "FB",
   "type": "input",
   "description": "Battery voltage feedback input. In SEL=GND/VCC modes an optional series resistor trims float voltage; when SEL is floating, FB regulates to 1.205 V and an external divider sets VFLOAT = 1.205 × (R4+R5)/R5.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "ISN",
   "type": "input",
   "description": "Charge current sense negative input. Connect to the battery-side end of the current-sense resistor RS. In constant-current mode VS(ISP-ISN) = 120 mV; RS = 0.12/IBAT.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "ISP",
   "type": "input",
   "description": "Charge current sense positive input. Connect to the inductor/output-side end of RS. Kelvin-connect ISP/ISN directly across RS for best accuracy.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "GND",
   "type": "power_in",
   "description": "Small-signal (analog) ground. Return the COMP compensation capacitor here, close to the IC, to keep PGND switching noise off the control loop.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "PGND",
   "type": "power_in",
   "description": "Power ground / gate-driver return. Carries the PMOS gate-drive switching current; connect to the ground plane close to the input capacitor.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "GVC",
   "type": "passive",
   "description": "Gate voltage clamp node. A 100 nF capacitor from GVC to VCC clamps the external PMOS gate-drive swing to ≥VCC-6.3 V, protecting low-VGS PMOS parts.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}