main
History Download
Ray Publish 0.1.0 a22c3cd

SLM27523CA-DG

Sillumin · Gate Drive ICs · SOP-8

SLM27523CA-DG from Sillumin, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ENA input Enable input for channel A: biased LOW disables the channel A output regardless of the INA state, while biased HIGH or left floating enables it.
2 INA input Inverting input to channel A in the SLM27523; OUTA is held LOW if INA is unbiased or floating.
3 GND power_in Ground; all signals are referenced to this pin.
4 INB input Inverting input to channel B in the SLM27523; OUTB is held LOW if INB is unbiased or floating.
5 OUTB output Output of channel B, rail-to-rail between VDD and GND with 4.5 A peak source and 5.5 A peak sink current.
6 VDD power_in Bias supply input with a recommended supply voltage range of 4.5 to 20 V.
7 OUTA output Output of channel A, rail-to-rail between VDD and GND with 4.5 A peak source and 5.5 A peak sink current.
8 ENB input Enable input for channel B: biased LOW disables the channel B output regardless of the INB state, while biased HIGH or left floating enables it.

Key specifications

Parameter Value
Manufacturer Sillumin
Package SOP-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 25 V 5
Continuous voltage on OUTx VO -0.3 V max VDD+0.3 5
Repetitive pulse voltage on OUTx VO -2 V Repetitive pulse less than 200ns; max VDD+0.3 5
Source continuous current on OUTx IO 0.3 A 5
Source pulsed current on OUTx IO 4.5 A 0.5 µs pulse 5
Sink pulsed current on OUTx IO 5.5 A 0.5 µs pulse 5
Voltage on INA, INB, ENA, ENB INA, INB, ENA, ENB -6 25 V 5
Operation junction temperature range TJ -40 150 °C 5
Lead temperature TL 300 °C soldering, 10 seconds 5
Storage temperature TS -55 150 °C 5
Supply voltage VDD 4.5 20 V Over operating free-air temperature range 5
Input voltage INA, INB -5 20 V Over operating free-air temperature range 5
Enable voltage ENA, ENB -5 20 V Over operating free-air temperature range 5
Operation junction temperature range TJ -40 140 °C Over operating free-air temperature range 5
Startup current IDD(off) 55 110 250 uA VDD = 3.4 V, INA = INB = VDD 7
Undervoltage positive going threshold VDDUV+ 3.9 4.2 4.5 V TJ = 25 °C 7
Undervoltage positive going threshold VDDUV+ 3.8 4.2 4.6 V TJ = -40 °C to 140 °C 7
Undervoltage negative going threshold VDDUV- 3.7 3.9 4.4 V 7
Input signal high threshold VIH 1.6 1.9 2.3 V Applied to INA, INB, ENA, ENB 7
Input signal low threshold VIL 1 1.3 1.5 V Applied to INA, INB, ENA, ENB 7
Source peak current IO 4.5 A CL = 0.22 μF 7
Sink peak current IO 5.5 A CL = 0.22 μF 7
High level output voltage VOH 0.008 0.016 V IO = -10 mA, VDD-VO 7
Low output voltage VOL 0.005 0.009 V IO = 10 mA 7
Output pull-up resistance ROH 0.5 0.8 1.6 Ω IO = -10 mA 7
Output pull-down resistance ROL 0.3 0.5 0.9 Ω IO = 10 mA 7
Rise time tR 7 15 ns CLOAD = 1.8 nF 7
Fall time tF 6 10 ns CLOAD = 1.8 nF 7
Delay matching between two channels tM 2 4 ns INA = INB, OUTA and OUTB at 50% transition point 7
Minimum input pulse width that changes the output state tPW 15 25 ns 7
Input to output propagation delay tD1, tD2 7 18 26 ns CLOAD = 1.8 nF, 5 V input pulse 7
EN to output propagation delay tD3, tD4 7 18 26 ns CLOAD = 1.8 nF, 5 V enable pulse 7
Supply voltage hysteresis VDD_H 0.3 V 7
Thermal resistance junction to ambient, SOP8 θJA 130 °C/W SOP8 5

CAD (KiCad official)

  • Symbol: SLM27523CA-DG
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: slm27523ca-dg-etched.step / slm27523ca-dg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); slm27523ca-dg.step / slm27523ca-dg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sillumin datasheet (14 pp, sha256 057a89d2aa4c43da, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus off (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF