Generated by kicad-footprint-generator · KiCad file format 20260206
SLM27523CA-DG
Sillumin · Gate Drive ICs · SOP-8
SLM27523CA-DG from Sillumin, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Enable input for channel A: biased LOW disables the channel A output regardless of the INA state, while biased HIGH or left floating enables it. |
| 2 | INA | input | Inverting input to channel A in the SLM27523; OUTA is held LOW if INA is unbiased or floating. |
| 3 | GND | power_in | Ground; all signals are referenced to this pin. |
| 4 | INB | input | Inverting input to channel B in the SLM27523; OUTB is held LOW if INB is unbiased or floating. |
| 5 | OUTB | output | Output of channel B, rail-to-rail between VDD and GND with 4.5 A peak source and 5.5 A peak sink current. |
| 6 | VDD | power_in | Bias supply input with a recommended supply voltage range of 4.5 to 20 V. |
| 7 | OUTA | output | Output of channel A, rail-to-rail between VDD and GND with 4.5 A peak source and 5.5 A peak sink current. |
| 8 | ENB | input | Enable input for channel B: biased LOW disables the channel B output regardless of the INB state, while biased HIGH or left floating enables it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sillumin |
| Package | SOP-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 25 | V | 5 | ||
| Continuous voltage on OUTx | VO | -0.3 | V | max VDD+0.3 | 5 | ||
| Repetitive pulse voltage on OUTx | VO | -2 | V | Repetitive pulse less than 200ns; max VDD+0.3 | 5 | ||
| Source continuous current on OUTx | IO | 0.3 | A | 5 | |||
| Source pulsed current on OUTx | IO | 4.5 | A | 0.5 µs pulse | 5 | ||
| Sink pulsed current on OUTx | IO | 5.5 | A | 0.5 µs pulse | 5 | ||
| Voltage on INA, INB, ENA, ENB | INA, INB, ENA, ENB | -6 | 25 | V | 5 | ||
| Operation junction temperature range | TJ | -40 | 150 | °C | 5 | ||
| Lead temperature | TL | 300 | °C | soldering, 10 seconds | 5 | ||
| Storage temperature | TS | -55 | 150 | °C | 5 | ||
| Supply voltage | VDD | 4.5 | 20 | V | Over operating free-air temperature range | 5 | |
| Input voltage | INA, INB | -5 | 20 | V | Over operating free-air temperature range | 5 | |
| Enable voltage | ENA, ENB | -5 | 20 | V | Over operating free-air temperature range | 5 | |
| Operation junction temperature range | TJ | -40 | 140 | °C | Over operating free-air temperature range | 5 | |
| Startup current | IDD(off) | 55 | 110 | 250 | uA | VDD = 3.4 V, INA = INB = VDD | 7 |
| Undervoltage positive going threshold | VDDUV+ | 3.9 | 4.2 | 4.5 | V | TJ = 25 °C | 7 |
| Undervoltage positive going threshold | VDDUV+ | 3.8 | 4.2 | 4.6 | V | TJ = -40 °C to 140 °C | 7 |
| Undervoltage negative going threshold | VDDUV- | 3.7 | 3.9 | 4.4 | V | 7 | |
| Input signal high threshold | VIH | 1.6 | 1.9 | 2.3 | V | Applied to INA, INB, ENA, ENB | 7 |
| Input signal low threshold | VIL | 1 | 1.3 | 1.5 | V | Applied to INA, INB, ENA, ENB | 7 |
| Source peak current | IO | 4.5 | A | CL = 0.22 μF | 7 | ||
| Sink peak current | IO | 5.5 | A | CL = 0.22 μF | 7 | ||
| High level output voltage | VOH | 0.008 | 0.016 | V | IO = -10 mA, VDD-VO | 7 | |
| Low output voltage | VOL | 0.005 | 0.009 | V | IO = 10 mA | 7 | |
| Output pull-up resistance | ROH | 0.5 | 0.8 | 1.6 | Ω | IO = -10 mA | 7 |
| Output pull-down resistance | ROL | 0.3 | 0.5 | 0.9 | Ω | IO = 10 mA | 7 |
| Rise time | tR | 7 | 15 | ns | CLOAD = 1.8 nF | 7 | |
| Fall time | tF | 6 | 10 | ns | CLOAD = 1.8 nF | 7 | |
| Delay matching between two channels | tM | 2 | 4 | ns | INA = INB, OUTA and OUTB at 50% transition point | 7 | |
| Minimum input pulse width that changes the output state | tPW | 15 | 25 | ns | 7 | ||
| Input to output propagation delay | tD1, tD2 | 7 | 18 | 26 | ns | CLOAD = 1.8 nF, 5 V input pulse | 7 |
| EN to output propagation delay | tD3, tD4 | 7 | 18 | 26 | ns | CLOAD = 1.8 nF, 5 V enable pulse | 7 |
| Supply voltage hysteresis | VDD_H | 0.3 | V | 7 | |||
| Thermal resistance junction to ambient, SOP8 | θJA | 130 | °C/W | SOP8 | 5 |
CAD (KiCad official)
- Symbol:
SLM27523CA-DG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
slm27523ca-dg-etched.step/slm27523ca-dg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);slm27523ca-dg.step/slm27523ca-dg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sillumin datasheet (14 pp, sha256
057a89d2aa4c43da, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).