Generated by kicad-footprint-generator · KiCad file format 20260206
SL27624MS
Slkor(SLKORMICRO Elec.) · Gate Drive ICs · SOP-8
SL27624MS from Slkor(SLKORMICRO Elec.), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Enable input for channel A: when ENA is low the channel A output is disabled regardless of INA, and the pin is internally pulled up to VDD (enable 200 kΩ pull-up), so it is enabled by default and should be tied to VDD if unused. |
| 2 | INA | input | Input of channel A, with OUTA in phase with INA; OUTA is held low when INA is floating due to the internal pull-down (120 kΩ), and INA should be connected to ground if unused. |
| 3 | GND | power_in | Ground; all signals are referenced to this pin. |
| 4 | INB | input | Input of channel B, with OUTB in phase with INB; OUTB is held low when INB is floating due to the internal pull-down (120 kΩ), and INB should be connected to ground if unused. |
| 5 | OUTB | output | Output of channel B, rail-to-rail between VDD and GND with 5.0 A peak source and 5.0 A peak sink capability at 12 V VDD. |
| 6 | VDD | power_in | Bias supply input; operates from 4.5 V to 30 V, and the SL27624M (this MPN's 8.5 V UVLO variant) holds outputs low below its rising UVLO threshold of 8 V to 9 V. |
| 7 | OUTA | output | Output of channel A, rail-to-rail between VDD and GND with 5.0 A peak source and 5.0 A peak sink capability at 12 V VDD. |
| 8 | ENB | input | Enable input for channel B: when ENB is low the channel B output is disabled regardless of INB, and the pin is internally pulled up to VDD (enable 200 kΩ pull-up), so it is enabled by default and should be tied to VDD if unused. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor(SLKORMICRO Elec.) |
| Package | SOP-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 33 | V | 4 | ||
| Voltage on INA, INB, ENA, ENB | -6 | 33 | V | 4 | |||
| Continuous voltage on OUTx | OUTA, OUTB | -0.3 | V | Continuous; upper limit printed as VDD+0.3 | 4 | ||
| Repetitive pulse voltage on OUTx | OUTA, OUTB | -2 | V | Repetitive pulse less than 200ns; upper limit printed as VDD+0.3 | 4 | ||
| Operation junction temperature range | TJ | -40 | 150 | °C | 4 | ||
| Lead temperature | TL | 300 | °C | soldering, 10 seconds | 4 | ||
| Storage temperature | TS | -55 | 150 | °C | 4 | ||
| Supply voltage | VDD | 4.5 | 30 | V | Over operating free-air temperature range | 4 | |
| Input voltage | INA, INB | -5 | 30 | V | Over operating free-air temperature range | 4 | |
| Enable voltage | ENA, ENB | -5 | 30 | V | Over operating free-air temperature range | 4 | |
| Operation junction temperature range | TJ | -40 | 150 | °C | Over operating free-air temperature range | 4 | |
| Rise time | tR | 7 | 11 | ns | VDD = 12V, CLOAD = 1.8 nF | 5 | |
| Fall time | tF | 6 | 8.4 | ns | VDD = 12V, CLOAD = 1.8 nF | 5 | |
| Minimum input pulse width that changes the output state | tPW | 13 | 15 | ns | VDD = 12V | 5 | |
| Input to output propagation delay | tD1, tD2 | 20 | 27 | ns | VDD = 12V, CLOAD = 1.8 nF, 5 V input pulse | 5 | |
| EN to output propagation delay | tD3, tD4 | 20 | 27 | ns | VDD = 12V, CLOAD = 1.8 nF, 5 V enable pulse | 5 | |
| VDD startup current | IVDD_OFF | 110 | 270 | μA | VDD = 3.4 V, ENA = ENB = VDD, INA=INB=3.3V | 5 | |
| VDD static current | IVDD | 810 | 1300 | μA | ENA=ENB=VDD, INA=INB=3.3V | 5 | |
| VDD static current | IVDD | 600 | 900 | μA | ENA=ENB=VDD, INA=INB=0V | 5 | |
| VDD operating current | IVDD_OP | 3.6 | 4.6 | mA | ENA=ENB=VDD, INA = INB = PWM, 1000kHz, no load at output | 5 | |
| VDD disable current | IVDD_DIS | 630 | 900 | μA | INA=INB = 3.3 V, ENA = ENB = GND | 5 | |
| VDD UVLO rising threshold | VDD_UV_R | 8 | 8.5 | 9 | V | SL27624M | 5 |
| VDD UVLO falling threshold | VDD_UV_F | 7 | 7.5 | 8 | V | SL27624 M | 5 |
| VDD UVLO hysteresis | VDD_UV_HYS | 1 | V | SL27624 M | 6 | ||
| Input signal high threshold | VIN_H | 1.8 | 2 | 2.3 | V | 6 | |
| Input signal low threshold | VIN_L | 0.8 | 1 | 1.2 | V | 6 | |
| Input signal hysteresis | VIN_HYS | 1 | V | 6 | |||
| Inx pin pulldown resistor | RIN | 120 | kΩ | INx=3.3V | 6 | ||
| Enable signal high threshold | VEN_H | 1.8 | 2 | 2.3 | V | 6 | |
| Enable signal low threshold | VEN_L | 0.8 | 1 | 1.2 | V | 6 | |
| Enable signal hysteresis | VEN_HYS | 1 | V | 6 | |||
| Enx pin pullup resistor | REN | 200 | kΩ | ENx=0V | 6 | ||
| Source peak current | ISRC | 5 | A | CL = 0.22 μF | 6 | ||
| Sink peak current | ISNK | 5 | A | CL = 0.22 μF | 6 | ||
| High level output voltage | VOH | 7.2 | 14 | mV | IO = -10 mA, VDD-VO | 6 | |
| Low output voltage | VOL | 4.5 | 8.5 | mV | IO = 10 mA | 6 | |
| Output pull-up resistance | ROH | 0.52 | 0.72 | 1.2 | Ω | IO = -10 mA | 6 |
| Output pull-down resistance | ROL | 0.26 | 0.45 | 0.74 | Ω | IO = 10 mA | 6 |
CAD (KiCad official)
- Symbol:
SL27624MS - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
sl27624ms-etched.step/sl27624ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl27624ms.step/sl27624ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor(SLKORMICRO Elec.) datasheet (8 pp, sha256
b36e1b38f76db4d2, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).