main
Ray
Publish 0.1.0
b661bc1
SL2263
Slkor(SLKORMICRO Elec.) · AC-DC Controllers & Regulators · SOT-23-6
SL2263 from Slkor(SLKORMICRO Elec.), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Gnd | power_in | Ground reference pin for the controller. |
| 2 | Fb | input | Feedback pin connected to the optocoupler feedback; absolute maximum rating is -0.3 V to 6 V. |
| 3 | Nc | unconnected | No connection; the datasheet specifies this pin is left floating (悬空). |
| 4 | Cs | input | Current sense input for cycle-by-cycle over-current protection; absolute maximum rating is -0.3 V to 6 V. |
| 5 | Vdd | power_in | Supply pin with recommended maximum operating voltage of 32 V and absolute maximum rating of -0.3 V to 34 V. |
| 6 | Gate | output | Gate drive output (totem-pole driver); absolute maximum rating is -0.3 V to 15 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor(SLKORMICRO Elec.) |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (absolute maximum) | Vdd | -0.3 | 34 | V | 2 | ||
| FB pin voltage (absolute maximum) | Fb | -0.3 | 6 | V | 2 | ||
| GATE pin voltage (absolute maximum) | Gate | -0.3 | 15 | V | 2 | ||
| CS pin voltage (absolute maximum) | Cs | -0.3 | 6 | V | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | ℃ | 2 | ||
| Operating temperature range (absolute maximum) | -40 | 150 | ℃ | 2 | |||
| Pin soldering temperature | 260 | ℃ | 10秒 | 2 | |||
| VDD maximum operating voltage (recommended) | VDD | 32 | V | 2 | |||
| Junction temperature range (recommended) | Tj | -40 | 150 | ℃ | 2 | ||
| Ambient temperature range (recommended) | -40 | 85 | ℃ | 2 | |||
| Turn-on voltage (VDD rising) | VTH_ON | 15.5 | 16.5 | 17.5 | V | VDD 上升 | 3 |
| Turn-off voltage (VDD falling) | VTH_OFF | 7 | 8 | 9 | V | VDD 下降 | 3 |
| Oscillator maximum frequency | FOSC_H | 60 | 65 | 70 | KHz | FB=3V | 3 |
| Oscillator minimum frequency | FOSC_L | 21 | 23 | 25 | KHz | 3 | |
| Start-up current | I_ST | 3 | 20 | uA | VDD_ON-1V | 3 | |
| VDD overvoltage protection | VDD_OVP | 32 | 36 | V | 3 | ||
| Operating current 1 (heavy load) | IOP1 | 2.5 | mA | 重载 | 3 | ||
| Operating current 2 (light load) | IOP2 | 600 | uA | 轻载 | 3 | ||
| Soft-start time | T_SS | 4 | ms | 3 | |||
| Leading-edge blanking time | LEB | 350 | ns | 3 | |||
| Overcurrent protection threshold | VTH_OCP | 750 | mV | 3 | |||
| Overload protection threshold (FB) | VTH_OLP | 3.6 | V | 3 | |||
| Overload protection time | T_OLP | 60 | ms | FB>4V | 3 | ||
| FB pin floating voltage | VF_FB | 4.6 | V | 3 | |||
| Frequency jitter amplitude | Jitter | 6 | % | 3 | |||
| Frequency stability | ΔF | 1 | % | 3 | |||
| Rise time | TR | 150 | ns | CL=1nF | 3 | ||
| Fall time | TF | 40 | ns | CL=1nF | 3 | ||
| Gate clamp voltage | V_Clamp | 11 | V | 3 | |||
| Package thermal resistance | 180 | ℃/W | 2 |
CAD (KiCad official)
- Symbol:
SL2263 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.225 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sl2263-etched.step/sl2263-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl2263.step/sl2263.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor(SLKORMICRO Elec.) datasheet (5 pp, sha256
035180adfebf3e5b, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SL2263
**Slkor(SLKORMICRO Elec.)** · AC-DC Controllers & Regulators · SOT-23-6
SL2263 from Slkor(SLKORMICRO Elec.), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Gnd | power_in | Ground reference pin for the controller. |
| 2 | Fb | input | Feedback pin connected to the optocoupler feedback; absolute maximum rating is -0.3 V to 6 V. |
| 3 | Nc | unconnected | No connection; the datasheet specifies this pin is left floating (悬空). |
| 4 | Cs | input | Current sense input for cycle-by-cycle over-current protection; absolute maximum rating is -0.3 V to 6 V. |
| 5 | Vdd | power_in | Supply pin with recommended maximum operating voltage of 32 V and absolute maximum rating of -0.3 V to 34 V. |
| 6 | Gate | output | Gate drive output (totem-pole driver); absolute maximum rating is -0.3 V to 15 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor(SLKORMICRO Elec.) |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (absolute maximum) | Vdd | -0.3 | | 34 | V | | 2 |
| FB pin voltage (absolute maximum) | Fb | -0.3 | | 6 | V | | 2 |
| GATE pin voltage (absolute maximum) | Gate | -0.3 | | 15 | V | | 2 |
| CS pin voltage (absolute maximum) | Cs | -0.3 | | 6 | V | | 2 |
| Storage temperature range | Tstg | -65 | | 150 | ℃ | | 2 |
| Operating temperature range (absolute maximum) | | -40 | | 150 | ℃ | | 2 |
| Pin soldering temperature | | | | 260 | ℃ | 10秒 | 2 |
| VDD maximum operating voltage (recommended) | VDD | | | 32 | V | | 2 |
| Junction temperature range (recommended) | Tj | -40 | | 150 | ℃ | | 2 |
| Ambient temperature range (recommended) | | -40 | | 85 | ℃ | | 2 |
| Turn-on voltage (VDD rising) | VTH_ON | 15.5 | 16.5 | 17.5 | V | VDD 上升 | 3 |
| Turn-off voltage (VDD falling) | VTH_OFF | 7 | 8 | 9 | V | VDD 下降 | 3 |
| Oscillator maximum frequency | FOSC_H | 60 | 65 | 70 | KHz | FB=3V | 3 |
| Oscillator minimum frequency | FOSC_L | 21 | 23 | 25 | KHz | | 3 |
| Start-up current | I_ST | | 3 | 20 | uA | VDD_ON-1V | 3 |
| VDD overvoltage protection | VDD_OVP | | 32 | 36 | V | | 3 |
| Operating current 1 (heavy load) | IOP1 | | 2.5 | | mA | 重载 | 3 |
| Operating current 2 (light load) | IOP2 | | 600 | | uA | 轻载 | 3 |
| Soft-start time | T_SS | | 4 | | ms | | 3 |
| Leading-edge blanking time | LEB | | 350 | | ns | | 3 |
| Overcurrent protection threshold | VTH_OCP | | 750 | | mV | | 3 |
| Overload protection threshold (FB) | VTH_OLP | | 3.6 | | V | | 3 |
| Overload protection time | T_OLP | | 60 | | ms | FB>4V | 3 |
| FB pin floating voltage | VF_FB | | 4.6 | | V | | 3 |
| Frequency jitter amplitude | Jitter | | 6 | | % | | 3 |
| Frequency stability | ΔF | | 1 | | % | | 3 |
| Rise time | TR | | 150 | | ns | CL=1nF | 3 |
| Fall time | TF | | 40 | | ns | CL=1nF | 3 |
| Gate clamp voltage | V_Clamp | | 11 | | V | | 3 |
| Package thermal resistance | | | 180 | | ℃/W | | 2 |
## CAD (KiCad official)
- Symbol: `SL2263`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.225 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `sl2263-etched.step` / `sl2263-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sl2263.step` / `sl2263.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Slkor(SLKORMICRO Elec.) datasheet](docs/sl2263-datasheet.pdf) (5 pp, sha256 `035180adfebf3e5b`, retrieved 2026-11-12, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sl2263-datasheet.pdf)