Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SL2263

Slkor(SLKORMICRO Elec.) · AC-DC Controllers & Regulators · SOT-23-6

SL2263 from Slkor(SLKORMICRO Elec.), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Gnd power_in Ground reference pin for the controller.
2 Fb input Feedback pin connected to the optocoupler feedback; absolute maximum rating is -0.3 V to 6 V.
3 Nc unconnected No connection; the datasheet specifies this pin is left floating (悬空).
4 Cs input Current sense input for cycle-by-cycle over-current protection; absolute maximum rating is -0.3 V to 6 V.
5 Vdd power_in Supply pin with recommended maximum operating voltage of 32 V and absolute maximum rating of -0.3 V to 34 V.
6 Gate output Gate drive output (totem-pole driver); absolute maximum rating is -0.3 V to 15 V.

Key specifications

Parameter Value
Manufacturer Slkor(SLKORMICRO Elec.)
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage (absolute maximum) Vdd -0.3 34 V 2
FB pin voltage (absolute maximum) Fb -0.3 6 V 2
GATE pin voltage (absolute maximum) Gate -0.3 15 V 2
CS pin voltage (absolute maximum) Cs -0.3 6 V 2
Storage temperature range Tstg -65 150 ℃ 2
Operating temperature range (absolute maximum) -40 150 ℃ 2
Pin soldering temperature 260 ℃ 10秒 2
VDD maximum operating voltage (recommended) VDD 32 V 2
Junction temperature range (recommended) Tj -40 150 ℃ 2
Ambient temperature range (recommended) -40 85 ℃ 2
Turn-on voltage (VDD rising) VTH_ON 15.5 16.5 17.5 V VDD 上升 3
Turn-off voltage (VDD falling) VTH_OFF 7 8 9 V VDD 下降 3
Oscillator maximum frequency FOSC_H 60 65 70 KHz FB=3V 3
Oscillator minimum frequency FOSC_L 21 23 25 KHz 3
Start-up current I_ST 3 20 uA VDD_ON-1V 3
VDD overvoltage protection VDD_OVP 32 36 V 3
Operating current 1 (heavy load) IOP1 2.5 mA 重载 3
Operating current 2 (light load) IOP2 600 uA 轻载 3
Soft-start time T_SS 4 ms 3
Leading-edge blanking time LEB 350 ns 3
Overcurrent protection threshold VTH_OCP 750 mV 3
Overload protection threshold (FB) VTH_OLP 3.6 V 3
Overload protection time T_OLP 60 ms FB>4V 3
FB pin floating voltage VF_FB 4.6 V 3
Frequency jitter amplitude Jitter 6 % 3
Frequency stability ΔF 1 % 3
Rise time TR 150 ns CL=1nF 3
Fall time TF 40 ns CL=1nF 3
Gate clamp voltage V_Clamp 11 V 3
Package thermal resistance 180 ℃/W 2

CAD (KiCad official)

  • Symbol: SL2263
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.225 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sl2263-etched.step / sl2263-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sl2263.step / sl2263.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Slkor(SLKORMICRO Elec.) datasheet (5 pp, sha256 035180adfebf3e5b, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF