main
History Download
Ray Publish 0.1.0 a7c4186

SK6692

Suntek · DC-DC Converters · SOT-23-6

SK6692 from Suntek, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BS power_out Bootstrap pin: a capacitor connected between SW and BST pins is required to form a floating supply across the high-side switch driver.
2 GND power_in Ground pin.
3 FB input Adjustable version feedback input: connect FB to the center point of the external resistor divider.
4 EN input Drive to a logic-high to enable the IC and to a logic-low to disable the IC and enter micro-power shutdown mode.
5 IN power_in Power supply pin with an input voltage range of 4.5V to 17V.
6 SW output Switching pin connecting the internal power MOSFETs to the external inductor.

Key specifications

Parameter Value
Manufacturer Suntek
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN voltage VIN -0.3 18 V 3
EN voltage -0.3 18 V 3
SW voltage -3 19 V 3
SW voltage (<10 ns transient) -5 19 V <10 ns transient 3
BS voltage (to SW) -0.3 6.5 V to SW 3
FB voltage -0.3 6 V 3
Operating junction temperature TJ -40 150 °C 3
Storage temperature Tstg -55 150 °C 3
Lead Temperature (Soldering) 260 °C Soldering, 10 sec. 3
Operating junction temperature TJ -40 125 °C 3
Operating temperature range -40 85 °C 3
Input voltage VIN 4.5 17 V 3
Output current 0 2 A 3
Junction-to-ambient thermal resistance RθJA 105 °C/W JESD 51-7, 4-layer JEDEC board 4
Junction-to-case (top) thermal resistance RθJC(top) 55 °C/W 4
Junction-to-board thermal resistance RθJB 17.5 °C/W 4
Junction-to-top characterization parameter ψJT 3.5 °C/W 4
Junction-to-board characterization parameter ψJB 17.5 °C/W 4
Input Voltage Range 4.5 17 V VIN=12V, TA=25°C unless otherwise specified 4
Output Voltage Range 0.6 7 V VIN=12V, TA=25°C unless otherwise specified 4
Supply Current (Quiescent) 0.6 0.8 mA VEN=3.0V 4
Supply Current (Shutdown) 4 uA VEN=0 or EN=GND 4
Feedback Voltage VFB 0.585 0.6 0.615 V VIN=12V, TA=25°C unless otherwise specified 4
High-Side Switch On-Resistance RDS(ON) 110 mΩ ISW=100mA 4
Low-Side Switch On-Resistance RDS(ON) 70 mΩ ISW=-100mA 4
Valley Switch Current Limit 2 A 4
Output Current 2.4 A VOUT=5V with L=4.7uH 4
Output UVP threshold 60 % Hiccup detect (H > L) 4
Hiccup wait time 1.8 ms 4
Over Voltage Protection Threshold 18 V 4
Switching Frequency 500 KHz 4
Maximum Duty Cycle 94 % VFB=90% 4
Minimum Off-Time 89 nS 4
EN Rising Threshold 1.4 V 4
EN Falling Threshold 0.8 V 4
Under-Voltage Lockout Threshold, Wake up VIN Voltage 4.3 4.5 V 4
Under-Voltage Lockout Threshold, Shutdown VIN Voltage 3.6 3.8 V 4
Under-Voltage Lockout Threshold, Hysteresis VIN voltage 500 mV 4
Soft Start 1.5 mS 4
Thermal Shutdown 160 ℃ 4
Thermal Hysteresis 30 ℃ 4

CAD (KiCad official)

  • Symbol: SK6692
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: sk6692-etched.step / sk6692-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sk6692.step / sk6692.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Suntek datasheet (12 pp, sha256 37a021be40d7a117, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF