Generated by kicad-footprint-generator · KiCad file format 20260206
SK6692
Suntek · DC-DC Converters · SOT-23-6
SK6692 from Suntek, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | power_out | Bootstrap pin: a capacitor connected between SW and BST pins is required to form a floating supply across the high-side switch driver. |
| 2 | GND | power_in | Ground pin. |
| 3 | FB | input | Adjustable version feedback input: connect FB to the center point of the external resistor divider. |
| 4 | EN | input | Drive to a logic-high to enable the IC and to a logic-low to disable the IC and enter micro-power shutdown mode. |
| 5 | IN | power_in | Power supply pin with an input voltage range of 4.5V to 17V. |
| 6 | SW | output | Switching pin connecting the internal power MOSFETs to the external inductor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Suntek |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN voltage | VIN | -0.3 | 18 | V | 3 | ||
| EN voltage | -0.3 | 18 | V | 3 | |||
| SW voltage | -3 | 19 | V | 3 | |||
| SW voltage (<10 ns transient) | -5 | 19 | V | <10 ns transient | 3 | ||
| BS voltage (to SW) | -0.3 | 6.5 | V | to SW | 3 | ||
| FB voltage | -0.3 | 6 | V | 3 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 sec. | 3 | |||
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Operating temperature range | -40 | 85 | °C | 3 | |||
| Input voltage | VIN | 4.5 | 17 | V | 3 | ||
| Output current | 0 | 2 | A | 3 | |||
| Junction-to-ambient thermal resistance | RθJA | 105 | °C/W | JESD 51-7, 4-layer JEDEC board | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 55 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 17.5 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 3.5 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 17.5 | °C/W | 4 | |||
| Input Voltage Range | 4.5 | 17 | V | VIN=12V, TA=25°C unless otherwise specified | 4 | ||
| Output Voltage Range | 0.6 | 7 | V | VIN=12V, TA=25°C unless otherwise specified | 4 | ||
| Supply Current (Quiescent) | 0.6 | 0.8 | mA | VEN=3.0V | 4 | ||
| Supply Current (Shutdown) | 4 | uA | VEN=0 or EN=GND | 4 | |||
| Feedback Voltage | VFB | 0.585 | 0.6 | 0.615 | V | VIN=12V, TA=25°C unless otherwise specified | 4 |
| High-Side Switch On-Resistance | RDS(ON) | 110 | mΩ | ISW=100mA | 4 | ||
| Low-Side Switch On-Resistance | RDS(ON) | 70 | mΩ | ISW=-100mA | 4 | ||
| Valley Switch Current Limit | 2 | A | 4 | ||||
| Output Current | 2.4 | A | VOUT=5V with L=4.7uH | 4 | |||
| Output UVP threshold | 60 | % | Hiccup detect (H > L) | 4 | |||
| Hiccup wait time | 1.8 | ms | 4 | ||||
| Over Voltage Protection Threshold | 18 | V | 4 | ||||
| Switching Frequency | 500 | KHz | 4 | ||||
| Maximum Duty Cycle | 94 | % | VFB=90% | 4 | |||
| Minimum Off-Time | 89 | nS | 4 | ||||
| EN Rising Threshold | 1.4 | V | 4 | ||||
| EN Falling Threshold | 0.8 | V | 4 | ||||
| Under-Voltage Lockout Threshold, Wake up VIN Voltage | 4.3 | 4.5 | V | 4 | |||
| Under-Voltage Lockout Threshold, Shutdown VIN Voltage | 3.6 | 3.8 | V | 4 | |||
| Under-Voltage Lockout Threshold, Hysteresis VIN voltage | 500 | mV | 4 | ||||
| Soft Start | 1.5 | mS | 4 | ||||
| Thermal Shutdown | 160 | ℃ | 4 | ||||
| Thermal Hysteresis | 30 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
SK6692 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
sk6692-etched.step/sk6692-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sk6692.step/sk6692.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Suntek datasheet (12 pp, sha256
37a021be40d7a117, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).