component
SK6690DP8
Public Made by Adomby adom
Suntek DC-DC Converters, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 5d ago |
| viewers | 5d ago |
| package.json | 5d ago |
| page.json | 5d ago |
| README.md | 5d ago |
| sk6690dp8-etched.glb | 5d ago |
| sk6690dp8-etched.step | 5d ago |
| sk6690dp8-hero.glb | 5d ago |
| sk6690dp8-hero.overlay.json | 5d ago |
| sk6690dp8.glb | 5d ago |
| sk6690dp8.kicad_mod | 5d ago |
| sk6690dp8.kicad_sym | 5d ago |
| sk6690dp8.lbr | 5d ago |
| sk6690dp8.step | 5d ago |
SK6690DP8
Suntek · DC-DC Converters · ESOP-8
SK6690DP8 from Suntek, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | passive | Bootstrap pin: a capacitor connected between SW and BST is required to form a floating supply across the high-side switch driver. |
| 2 | VIN | power_in | Power supply input, operating range 4.5V to 38V (absolute maximum 42V), with a ceramic bypass capacitor placed close to the pin. |
| 3 | SW | power_out | Switching node pin connecting the internal high-side and low-side power MOSFETs to the inductor. |
| 4 | GND | power_in | Ground pin, shared with the exposed pad (pin 4/9 GND/EPAD). |
| 5 | FB | input | Feedback input for the adjustable version, connected to the center point of the external resistor divider; VFB is 0.923V typical (0.900V to 0.946V) for SK6690DP8. |
| 6 | NC | unconnected | No connection. |
| 7 | EN | input | Enable input: drive logic-high to enable the IC, drive logic-low to disable it and enter micro-power shutdown mode (rising threshold 1.1V, falling threshold 0.9V). |
| 8 | NC | unconnected | No connection. |
| 9 | EPAD | power_in | Exposed pad, ground (GND/EPAD, pin 4/9), to be connected to a large copper area for cooling. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Suntek |
| Package | ESOP-8 |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 0.9 | 0.923 | 0.946 | V | VIN=12V, TA=25°C, SK6690DP8 | 4 |
| Input Voltage Range | 4.5 | 38 | V | VIN=12V, TA=25°C | 4 | ||
| Supply Current (Quiescent) | 0.6 | 0.8 | mA | VEN =3.0V | 4 | ||
| Supply Current (Shutdown) | 4 | uA | VEN =0 or EN = GND | 4 | |||
| Under-Voltage Lockout Wake up VIN Voltage | 3.8 | 4.1 | V | 4 | |||
| Under-Voltage Lockout Shutdown VIN Voltage | 3.2 | 3.5 | V | 4 | |||
| High-Side Switch On-Resistance | 25 | mΩ | ISW=100mA | 4 | |||
| Low-Side Switch On-Resistance | 15 | mΩ | ISW=-100mA | 4 | |||
| Valley Switch Current Limit | 4 | A | 4 | ||||
| Over Voltage Protection Threshold | 38.5 | V | 4 | ||||
| Switching Frequency | 500 | KHz | 4 | ||||
| Maximum Duty Cycle | 82 | % | VFB=90% | 4 | |||
| Minimum Off-Time | 120 | nS | 4 | ||||
| EN Rising Threshold | 1.1 | V | 4 | ||||
| EN Falling Threshold | 0.9 | V | 4 | ||||
| Under-Voltage Lockout Hysteresis VIN voltage | 300 | mV | 4 | ||||
| Soft Start | 1.2 | mS | 4 | ||||
| Thermal Shutdown | 160 | ℃ | 4 | ||||
| Thermal Hysteresis | 30 | ℃ | 4 | ||||
| VIN voltage | -0.3 | 42 | V | 3 | |||
| EN voltage | -0.3 | 42 | V | 3 | |||
| SW voltage | -0.3 | V | max printed as VIN+1V | 3 | |||
| SW voltage (10ns transient) | -5 | V | max printed as VIN+2V | 3 | |||
| BS voltage | -0.3 | V | max printed as Vsw+5V | 3 | |||
| FB voltage | -0.3 | 6 | V | 3 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Lead Temperature | 260 | °C | Soldering, 10sec. | 3 | |||
| Operating junction temperature | -40 | 125 | °C | 3 | |||
| Operating temperature range | -40 | 85 | °C | 3 | |||
| Input voltage VIN | VIN | 4.5 | 38 | V | 3 | ||
| Output current | 0 | 3 | A | 3 | |||
| Junction-to-ambient thermal resistance | RθJA | 48.7 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 52.4 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 25.5 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 8.4 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 25.2 | °C/W | 4 | |||
| Junction-to-case (bottom) thermal resistance | θJCbot | 6.5 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
SK6690DP8 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
sk6690dp8-etched.step/sk6690dp8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sk6690dp8.step/sk6690dp8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Suntek datasheet (12 pp, sha256
fa5dcb7cb0431909, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).