main
Ray Publish 0.1.0 a0f4f26
{
  "slug": "sit82c251",
  "version": "0.1.0",
  "type": "component",
  "description": "SIT CAN Transceivers, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "sit82c251",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sit82c251.kicad_sym",
    "sit82c251.kicad_mod",
    "sit82c251.glb",
    "sit82c251.step",
    "sit82c251.lbr",
    "docs/hero.png",
    "docs/sit82c251-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sit82c251-hero.glb",
    "sit82c251-hero.overlay.json",
    "sit82c251-etched.glb"
  ],
  "component": {
    "mpn": "SIT82C251",
    "manufacturer": "SIT",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "Interface",
    "subcategory": "CAN Transceivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588887936079441920",
    "parts": {
      "symbol": "sit82c251.kicad_sym",
      "footprint": "sit82c251.kicad_mod",
      "model_3d": "sit82c251-hero.glb",
      "model_3d_plain": "sit82c251-etched.glb",
      "model_3d_step": "sit82c251-etched.step",
      "model_3d_step_plain": "sit82c251.step",
      "lbr": "sit82c251.lbr"
    },
    "distributor_links": {
      "lcsc": "C313013"
    },
    "distributor_check": {
      "checked_at": "2026-10-15T02:32:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TXD",
        "type": "input",
        "description": "Transmitter data input from the CAN protocol controller (MCU side), which sets the bus state when Rs is low."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; all device voltages are referenced to this pin."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply pin; the absolute maximum rating is -0.3 to +7 V, with 4.5 to 5.5 V as the stated supply range."
      },
      {
        "number": "4",
        "name": "RXD",
        "type": "output",
        "description": "Receiver data output to the MCU; the MCU-side port is rated -0.3 V to VCC+0.3 V."
      },
      {
        "number": "5",
        "name": "VREF",
        "type": "power_out",
        "description": "Reference voltage output; the MCU-side port is rated -0.3 V to VCC+0.3 V."
      },
      {
        "number": "6",
        "name": "CANL",
        "type": "bidirectional",
        "description": "Low-level CAN bus line input/output; bus-side voltage is rated -40 V to +40 V and transient voltage -200 V to +200 V (see Fig. 7)."
      },
      {
        "number": "7",
        "name": "CANH",
        "type": "bidirectional",
        "description": "High-level CAN bus line input/output; bus-side voltage is rated -40 V to +40 V and transient voltage -200 V to +200 V (see Fig. 7)."
      },
      {
        "number": "8",
        "name": "Rs",
        "type": "input",
        "description": "Mode select: low selects high-speed mode, while high or unconnected selects low-power standby mode; the MCU-side port is rated -0.3 V to VCC+0.3 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives one pin table (pins 1-8) for the device and does not print a separate DIP-8 pin ; The pin type for VREF (pin 5) is an engineering judgment. The datasheet describes it only as a refer; The VCC absolute maximum (-0.3 to +7 V) is from page 2. The 4.5 to 5.5 V operating supply range is f"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0441,
        "at": "2026-10-15T02:32:29"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588887936079441920",
        "pages": 16,
        "sha256": "5a0a584d0276802c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sit82c251.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-15",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sit82c251-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "faec4e52aa0cb9883de19c97f518441c99d1589ea58aac65857448470d944913",
        "checked": "2026-10-15",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}