main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sit82c251: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sit82c251-etched.glb Publish 0.1.0 · Ray
sit82c251-etched.step sit82c251: factory component page (tier=lcsc) · Ray
sit82c251-hero.glb sit82c251: hero GLB from the etched model (keeps the MPN mark) · Ray
sit82c251-hero.overlay.json Publish 0.1.0 · Ray
sit82c251.glb Publish 0.1.0 · Ray
sit82c251.kicad_mod Publish 0.1.0 · Ray
sit82c251.kicad_sym Publish 0.1.0 · Ray
sit82c251.lbr Publish 0.1.0 · Ray
sit82c251.step Publish 0.1.0 · Ray

SIT82C251

SIT · CAN Transceivers · DIP-8

SIT82C251 from SIT, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXD input Transmitter data input from the CAN protocol controller (MCU side), which sets the bus state when Rs is low.
2 GND power_in Ground reference; all device voltages are referenced to this pin.
3 VCC power_in Supply pin; the absolute maximum rating is -0.3 to +7 V, with 4.5 to 5.5 V as the stated supply range.
4 RXD output Receiver data output to the MCU; the MCU-side port is rated -0.3 V to VCC+0.3 V.
5 VREF power_out Reference voltage output; the MCU-side port is rated -0.3 V to VCC+0.3 V.
6 CANL bidirectional Low-level CAN bus line input/output; bus-side voltage is rated -40 V to +40 V and transient voltage -200 V to +200 V (see Fig. 7).
7 CANH bidirectional High-level CAN bus line input/output; bus-side voltage is rated -40 V to +40 V and transient voltage -200 V to +200 V (see Fig. 7).
8 Rs input Mode select: low selects high-speed mode, while high or unconnected selects low-power standby mode; the MCU-side port is rated -0.3 V to VCC+0.3 V.

Key specifications

Parameter Value
Manufacturer SIT
Package DIP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
供电电压 VCC -0.3 7 V 2
MCU 侧端口电压 TXD,RXD,VREF,Rs -0.3 V 2
总线侧端口电压 CANL,CANH -40 40 V 2
6,7 号引脚瞬态电压 Vtr -200 200 V 见图 7 2
存储温度范围 Tstg -55 150 ℃ 2
环境温度 Tamb -40 125 ℃ 2
焊接温度范围 300 ℃ 2
连续功耗 DIP8 700 mW DIP8 封装 2
供电电压 Vcc 4.5 5.5 V 1
环境温度 Tamb -40 125 ℃ 1
总线差分电压 Vdiff 1.5 3 V 1
CANH 输出电压(显性) VOH(D) 2.9 3.4 4.5 V VI=0V,Rs=0V,RL=60Ω,图 1、图 2 3
总线输出电压(隐性) VO(R) 2 2.5 3 V VI=3V,Rs=0V,RL=60Ω,图 1、图 2 3
共模输出电压 VOC 2 2.5 3 V Rs=0V,图 8 3
传播延时(低到高) tPLH 25 65 120 ns Rs=0V,图 4 4
传播延时(高到低) tPHL 25 45 90 ns 4
CANH、CANL 输入电阻 RIN 15 30 40 kΩ TXD=3V,Rs=0V 4
传播延迟(低到高) tPLH 60 100 130 ns Rs=0V or VCC,图 6 5
传播延迟(高到低) tPHL 45 70 90 ns 5
输入低电平上限 VIL -0.3 0.8 V 5
输入高电平下限 VIH 2 V 5

CAD (KiCad official)

  • Symbol: SIT82C251
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: sit82c251-etched.step / sit82c251-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit82c251.step / sit82c251.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SIT datasheet (16 pp, sha256 5a0a584d0276802c, retrieved 2026-10-15, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF