main
Ray Publish 0.1.0 468cb49

SiT8209AI-22-33E-122.880000D

SiTime · Pre-programmed Oscillators · SMD3225-4P

SiT8209AI-22-33E-122.880000D from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST input Output enable pin, which for this OE-feature ("E") variant gives the specified frequency output when logic high or open and places the output driver in high impedance when logic low, with VIH of 70% Vdd minimum, VIL of 30% Vdd maximum, and an internal pull-up of 100-250 kΩ.
2 GND power_in Electrical ground reference for the oscillator.
3 OUT output LVCMOS/LVTTL oscillator clock output, with VOH of at least 90% Vdd and VOL of at most 10% Vdd at 15 pF load.
4 VDD power_in Power supply input; for the 3.3 V ("33") variant the rated supply range is 2.97-3.63 V, and the absolute maximum VDD is -0.5 to 4 V with a 0.1 µF decoupling capacitor between Vdd and GND recommended.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD3225-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Frequency Range f 80 220 MHz 1
Frequency Stability (+/-25 PPM option) F_stab -25 25 PPM Inclusive of Initial tolerance at 25 °C, and variations over operating temperature, rated power supply voltage and load 1
Operating Temperature Range (Industrial) T_use -40 85 °C Industrial 1
Supply Voltage (3.3 V) Vdd 2.97 3.3 3.63 V 1
Duty Cycle DC 45 55 % f <= 165 MHz, all Vdds. 1
Output Voltage High VOH 90 % Vdd IOH = -6 mA, IOL = 6 mA, (Vdd = 3.3V, 2.8V, 2.5V) 1
Output Voltage Low VOL 10 % Vdd 1
Input Voltage High (OE) VIH 70 % Vdd Pin 1, OE or ST 1
Input Voltage Low (OE) VIL 30 % Vdd Pin 1, OE or ST 1
Current Consumption (3.3 V) Idd 34 36 mA No load condition, f = 100 MHz, Vdd = 2.5V, 2.8V or 3.3V 1
OE Disable Current (3.3 V) I_OD 31 mA Vdd = 2.5V, 2.8V or 3.3V, OE = GND, output is Weakly Pulled Down 1
Rise/Fall Time Tr, Tf 1.2 2 ns 15 pF load, 10% - 90% Vdd 1
Input Pull-up Impedance (OE logic high or low) Z_in 100 250 kΩ Pin 1, OE logic high or logic low, or ST logic high 1
Startup Time T_start 7 10 ms Measured from the time Vdd reaches its rated minimum value 1
OE Enable/Disable Time T_oe 115 ns f = 80 MHz, For other frequencies, T_oe = 100 ns + 3 cycles 1
RMS Period Jitter (3.3 V) T_jitt 1.5 2 ps f = 156.25 MHz, Vdd = 2.5V, 2.8V or 3.3V 1
RMS Phase Jitter (random) T_phj 0.5 1 ps f = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz 1
First year Aging F_aging -1.5 1.5 PPM 25°C 1
10-year Aging F_aging -5 5 PPM 25°C 1
Storage Temperature -65 150 °C 2
VDD (supply voltage) VDD -0.5 4 V 2
Electrostatic Discharge 2000 V 2
Soldering Temperature 260 °C follow standard Pb free soldering guidelines 2
Thermal resistance junction-to-ambient, 4 layer board (3225) θJA 109 °C/W Package 3225 (3.2 x 2.5 mm), 4 Layer Board 2
Thermal resistance junction-to-ambient, 2 layer board (3225) θJA 212 °C/W Package 3225 (3.2 x 2.5 mm), 2 Layer Board 2
Thermal resistance junction-to-case, bottom (3225) θJC 27 °C/W Package 3225 (3.2 x 2.5 mm), Bottom 2

CAD (KiCad official)

  • Symbol: SiT8209AI-22-33E-122.880000D
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: sit8209ai-22-33e-122-880000d-etched.step / sit8209ai-22-33e-122-880000d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit8209ai-22-33e-122-880000d.step / sit8209ai-22-33e-122-880000d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (7 pp, sha256 200a2d3427cab35b, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF