Generated by kicad-footprint-generator · KiCad file format 20260206
SiT8209AI-22-33E-122.880000D
SiTime · Pre-programmed Oscillators · SMD3225-4P
SiT8209AI-22-33E-122.880000D from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST | input | Output enable pin, which for this OE-feature ("E") variant gives the specified frequency output when logic high or open and places the output driver in high impedance when logic low, with VIH of 70% Vdd minimum, VIL of 30% Vdd maximum, and an internal pull-up of 100-250 kΩ. |
| 2 | GND | power_in | Electrical ground reference for the oscillator. |
| 3 | OUT | output | LVCMOS/LVTTL oscillator clock output, with VOH of at least 90% Vdd and VOL of at most 10% Vdd at 15 pF load. |
| 4 | VDD | power_in | Power supply input; for the 3.3 V ("33") variant the rated supply range is 2.97-3.63 V, and the absolute maximum VDD is -0.5 to 4 V with a 0.1 µF decoupling capacitor between Vdd and GND recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD3225-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Frequency Range | f | 80 | 220 | MHz | 1 | ||
| Frequency Stability (+/-25 PPM option) | F_stab | -25 | 25 | PPM | Inclusive of Initial tolerance at 25 °C, and variations over operating temperature, rated power supply voltage and load | 1 | |
| Operating Temperature Range (Industrial) | T_use | -40 | 85 | °C | Industrial | 1 | |
| Supply Voltage (3.3 V) | Vdd | 2.97 | 3.3 | 3.63 | V | 1 | |
| Duty Cycle | DC | 45 | 55 | % | f <= 165 MHz, all Vdds. | 1 | |
| Output Voltage High | VOH | 90 | % Vdd | IOH = -6 mA, IOL = 6 mA, (Vdd = 3.3V, 2.8V, 2.5V) | 1 | ||
| Output Voltage Low | VOL | 10 | % Vdd | 1 | |||
| Input Voltage High (OE) | VIH | 70 | % Vdd | Pin 1, OE or ST | 1 | ||
| Input Voltage Low (OE) | VIL | 30 | % Vdd | Pin 1, OE or ST | 1 | ||
| Current Consumption (3.3 V) | Idd | 34 | 36 | mA | No load condition, f = 100 MHz, Vdd = 2.5V, 2.8V or 3.3V | 1 | |
| OE Disable Current (3.3 V) | I_OD | 31 | mA | Vdd = 2.5V, 2.8V or 3.3V, OE = GND, output is Weakly Pulled Down | 1 | ||
| Rise/Fall Time | Tr, Tf | 1.2 | 2 | ns | 15 pF load, 10% - 90% Vdd | 1 | |
| Input Pull-up Impedance (OE logic high or low) | Z_in | 100 | 250 | kΩ | Pin 1, OE logic high or logic low, or ST logic high | 1 | |
| Startup Time | T_start | 7 | 10 | ms | Measured from the time Vdd reaches its rated minimum value | 1 | |
| OE Enable/Disable Time | T_oe | 115 | ns | f = 80 MHz, For other frequencies, T_oe = 100 ns + 3 cycles | 1 | ||
| RMS Period Jitter (3.3 V) | T_jitt | 1.5 | 2 | ps | f = 156.25 MHz, Vdd = 2.5V, 2.8V or 3.3V | 1 | |
| RMS Phase Jitter (random) | T_phj | 0.5 | 1 | ps | f = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz | 1 | |
| First year Aging | F_aging | -1.5 | 1.5 | PPM | 25°C | 1 | |
| 10-year Aging | F_aging | -5 | 5 | PPM | 25°C | 1 | |
| Storage Temperature | -65 | 150 | °C | 2 | |||
| VDD (supply voltage) | VDD | -0.5 | 4 | V | 2 | ||
| Electrostatic Discharge | 2000 | V | 2 | ||||
| Soldering Temperature | 260 | °C | follow standard Pb free soldering guidelines | 2 | |||
| Thermal resistance junction-to-ambient, 4 layer board (3225) | θJA | 109 | °C/W | Package 3225 (3.2 x 2.5 mm), 4 Layer Board | 2 | ||
| Thermal resistance junction-to-ambient, 2 layer board (3225) | θJA | 212 | °C/W | Package 3225 (3.2 x 2.5 mm), 2 Layer Board | 2 | ||
| Thermal resistance junction-to-case, bottom (3225) | θJC | 27 | °C/W | Package 3225 (3.2 x 2.5 mm), Bottom | 2 |
CAD (KiCad official)
- Symbol:
SiT8209AI-22-33E-122.880000D - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sit8209ai-22-33e-122-880000d-etched.step/sit8209ai-22-33e-122-880000d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8209ai-22-33e-122-880000d.step/sit8209ai-22-33e-122-880000d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (7 pp, sha256
200a2d3427cab35b, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).