main
Ray Publish 0.1.0 4e338fe

SiT8008BI-21-33E-25.000000

SiTime · Pre-programmed Oscillators · SMD3225-4P

SiT8008BI-21-33E-25.000000 from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Factory-programmed as Output Enable (logic low puts the output in high impedance while the core keeps running), Standby (logic low puts the device to sleep with output weakly pulled low and supply current reduced to Istd), or No Connect (any voltage between 0 and Vdd or open, with no function); a pull-up of 10 kOhm or less is recommended if the pin is not externally driven, and the input thresholds are 70% Vdd high and 30% Vdd low.
2 GND power_in Electrical ground.
3 OUT output Oscillator clock output, LVCMOS/HCMOS compatible.
4 VDD power_in Power supply voltage; a capacitor of 0.1 uF or higher between Vdd and GND is required.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD3225-4P
Category Crystal Oscillator/Oscillator/Resonator
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Frequency Range f 1 110 MHz 1
Frequency Stability (±20 ppm option) F_stab -20 20 ppm Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. 1
Frequency Stability (±25 ppm option) F_stab -25 25 ppm Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. 1
Frequency Stability (±50 ppm option) F_stab -50 50 ppm Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. 1
Operating Temperature (Industrial) T_use -40 85 °C Industrial 1
Supply Voltage Vdd_3.3 Vdd_3.3 2.97 3.3 3.63 V 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY 1
OE Disable Current I_OD 4.2 mA Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. OE = GND, Output in high-Z state 1
Standby Current I_std 2.1 4.3 A ST = GND, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. Output is weakly pulled down 1
Duty Cycle DC 45 55 % All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 2
Rise/Fall Time Tr, Tf 1 2 ns 20% - 80% Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3 2
Output High Voltage VOH 90 % Vdd IOH = -4 mA (Vdd_3.0 and Vdd_3.3) 2
Output Low Voltage VOL 10 % Vdd IOL = 4 mA (Vdd_3.0 and Vdd_3.3) 2
Input High Voltage VIH 70 % Vdd Pin 1, OE or ST 2
Input Low Voltage VIL 30 % Vdd Pin 1, OE or ST 2
Input Pull-up Impedance Z_in 50 87 150 k Pin 1, OE logic high or logic low, or ST logic high 2
Input Pull-up Impedance (ST logic low) Z_in 2 M Pin 1, ST logic low 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 130 ns f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
Resume Time T_resume 5 ms Measured from the time ST pin crosses 50% threshold 2
RMS Period Jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX 2
Peak-to-peak Period Jitter T_pk 12 25 ps f = 75 MHz, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY 2
RMS Phase Jitter (random), 900 kHz to 7.5 MHz T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX 2
RMS Phase Jitter (random), 12 kHz to 20 MHz T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX 2
Storage Temperature -65 150 °C 3
Supply Voltage Vdd Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C 3
Thermal Resistance Junction-to-Ambient (3225, 4 layer board) JA 109 °C/W JA, 4 Layer Board, 3225 package 3
Thermal Resistance Junction-to-Ambient (3225, 2 layer board) JA 212 °C/W JA, 2 Layer Board, 3225 package 3
Thermal Resistance Junction-to-Case (3225, bottom) JC 27 °C/W JC, Bottom, 3225 package 3
Maximum Operating Junction Temperature 95 °C Max operating ambient temperature 85°C 3

CAD (KiCad official)

  • Symbol: SiT8008BI-21-33E-25.000000
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: sit8008bi-21-33e-25-000000-etched.step / sit8008bi-21-33e-25-000000-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit8008bi-21-33e-25-000000.step / sit8008bi-21-33e-25-000000.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (18 pp, sha256 fcdbddbb6ff5c9c4, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF