Generated by kicad-footprint-generator · KiCad file format 20260206
SiT8008BI-21-33E-25.000000
SiTime · Pre-programmed Oscillators · SMD3225-4P
SiT8008BI-21-33E-25.000000 from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Factory-programmed as Output Enable (logic low puts the output in high impedance while the core keeps running), Standby (logic low puts the device to sleep with output weakly pulled low and supply current reduced to Istd), or No Connect (any voltage between 0 and Vdd or open, with no function); a pull-up of 10 kOhm or less is recommended if the pin is not externally driven, and the input thresholds are 70% Vdd high and 30% Vdd low. |
| 2 | GND | power_in | Electrical ground. |
| 3 | OUT | output | Oscillator clock output, LVCMOS/HCMOS compatible. |
| 4 | VDD | power_in | Power supply voltage; a capacitor of 0.1 uF or higher between Vdd and GND is required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD3225-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Frequency Range | f | 1 | 110 | MHz | 1 | ||
| Frequency Stability (±20 ppm option) | F_stab | -20 | 20 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. | 1 | |
| Frequency Stability (±25 ppm option) | F_stab | -25 | 25 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. | 1 | |
| Frequency Stability (±50 ppm option) | F_stab | -50 | 50 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load. | 1 | |
| Operating Temperature (Industrial) | T_use | -40 | 85 | °C | Industrial | 1 | |
| Supply Voltage Vdd_3.3 | Vdd_3.3 | 2.97 | 3.3 | 3.63 | V | 1 | |
| Current Consumption | Idd | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY | 1 | |
| OE Disable Current | I_OD | 4.2 | mA | Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. OE = GND, Output in high-Z state | 1 | ||
| Standby Current | I_std | 2.1 | 4.3 | A | ST = GND, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. Output is weakly pulled down | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 2 | |
| Rise/Fall Time | Tr, Tf | 1 | 2 | ns | 20% - 80% Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3 | 2 | |
| Output High Voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd_3.0 and Vdd_3.3) | 2 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOL = 4 mA (Vdd_3.0 and Vdd_3.3) | 2 | ||
| Input High Voltage | VIH | 70 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | k | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Input Pull-up Impedance (ST logic low) | Z_in | 2 | M | Pin 1, ST logic low | 2 | ||
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 130 | ns | f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles | 2 | ||
| Resume Time | T_resume | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 | ||
| RMS Period Jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX | 2 | |
| Peak-to-peak Period Jitter | T_pk | 12 | 25 | ps | f = 75 MHz, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY | 2 | |
| RMS Phase Jitter (random), 900 kHz to 7.5 MHz | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX | 2 | |
| RMS Phase Jitter (random), 12 kHz to 20 MHz | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage Vdd | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Thermal Resistance Junction-to-Ambient (3225, 4 layer board) | JA | 109 | °C/W | JA, 4 Layer Board, 3225 package | 3 | ||
| Thermal Resistance Junction-to-Ambient (3225, 2 layer board) | JA | 212 | °C/W | JA, 2 Layer Board, 3225 package | 3 | ||
| Thermal Resistance Junction-to-Case (3225, bottom) | JC | 27 | °C/W | JC, Bottom, 3225 package | 3 | ||
| Maximum Operating Junction Temperature | 95 | °C | Max operating ambient temperature 85°C | 3 |
CAD (KiCad official)
- Symbol:
SiT8008BI-21-33E-25.000000 - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sit8008bi-21-33e-25-000000-etched.step/sit8008bi-21-33e-25-000000-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8008bi-21-33e-25-000000.step/sit8008bi-21-33e-25-000000.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
fcdbddbb6ff5c9c4, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).