main
Ray Publish 0.1.0 72fefd2

SIT8008BI-13-YYS-25.600000

SiTime · Oscillators · SMD2520-4P

SIT8008BI-13-YYS-25.600000 from SiTime, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Factory-programmed as Output Enable (logic low sets the output to high-Z), Standby (logic low puts the device in sleep with the output weakly pulled low), or No Connect (no function), with input high at 70% Vdd minimum and input low at 30% Vdd maximum and a pull-up impedance of 50 k typical.
2 GND power_in Electrical ground; a capacitor of 0.1 uF or higher between Vdd and GND is required.
3 OUT output LVCMOS/HCMOS clock output, with output high of at least 90% Vdd and output low of at most 10% Vdd at the specified drive currents.
4 VDD power_in Power supply voltage, with a 0.1 uF or higher capacitor required between Vdd and GND; the Vdd_YY option spans 1.62 V to 3.63 V.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2520-4P
Category Resonators/Oscillators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Frequency Range f 1 110 MHz 1
Operating Temperature Range (Industrial) T_use -40 85 °C Industrial 1
Supply Voltage Option YY Vdd_YY 1.62 3.63 V Vdd_YY 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY 1
OE Disable Current I_OD 4.2 mA Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. OE = GND, Output in high-Z state 1
Standby Current I_std 2.1 4.3 A ST = GND, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. Output is weakly pulled down 1
Duty Cycle DC 45 55 % All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 2
Rise/Fall Time Tr, Tf 2.7 ns 20% - 80% Vdd_YY 2
Output High Voltage VOH 90 % IOH = -4 mA (Vdd_3.0 and Vdd_3.3); IOH = -3 mA (Vdd_2.8 and Vdd_2.5); IOH = -2 mA (Vdd_1.8) 2
Output Low Voltage VOL 10 % IOL = 4 mA (Vdd_3.0 and Vdd_3.3); IOL = 3 mA (Vdd_2.8 and Vdd_2.5); IOL = 2 mA (Vdd_1.8) 2
Input High Voltage VIH 70 % Pin 1, OE or ST 2
Input Low Voltage VIL 30 % Pin 1, OE or ST 2
Input Pull-up Impedance Z_in 50 87 150 k Pin 1, OE logic high or logic low, or ST logic high 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 130 ns f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
Resume Time T_resume 5 ms Measured from the time ST pin crosses 50% threshold 2
RMS Period Jitter T_jitt 3.3 ps f = 75 MHz, Vdd_YY 2
Peak-to-peak Period Jitter T_pk 12 25 ps f = 75 MHz, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY 2
RMS Phase Jitter (random) T_phj 1.4 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_YY 2
RMS Phase Jitter (random) T_phj 2.3 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_YY 2
Storage Temperature -65 150 °C 3
Supply Voltage Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C 3
Thermal Resistance Junction-to-Ambient, 4 Layer Board (2520) JA 117 °C/W 4 Layer Board, JESD51 3
Thermal Resistance Junction-to-Ambient, 2 Layer Board (2520) JA 222 °C/W 2 Layer Board, JESD51 3
Thermal Resistance Junction-to-Case, Bottom (2520) JC 26 °C/W Bottom, JESD51 3
Maximum Operating Junction Temperature at 85 °C Ambient 95 °C Max operating ambient 85°C 3

CAD (KiCad official)

  • Symbol: SIT8008BI-13-YYS-25.600000
  • Footprint: Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm
  • 3D model: SMD2520-4P (KiCad packages3D, STEP)
  • 3D model files: sit8008bi-13-yys-25-600000-etched.step / sit8008bi-13-yys-25-600000-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit8008bi-13-yys-25-600000.step / sit8008bi-13-yys-25-600000.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (18 pp, sha256 fcdbddbb6ff5c9c4, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF