3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT8008BI-13-YYS-25.600000
SiTime · Oscillators · SMD2520-4P
SIT8008BI-13-YYS-25.600000 from SiTime, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Factory-programmed as Output Enable (logic low sets the output to high-Z), Standby (logic low puts the device in sleep with the output weakly pulled low), or No Connect (no function), with input high at 70% Vdd minimum and input low at 30% Vdd maximum and a pull-up impedance of 50 k typical. |
| 2 | GND | power_in | Electrical ground; a capacitor of 0.1 uF or higher between Vdd and GND is required. |
| 3 | OUT | output | LVCMOS/HCMOS clock output, with output high of at least 90% Vdd and output low of at most 10% Vdd at the specified drive currents. |
| 4 | VDD | power_in | Power supply voltage, with a 0.1 uF or higher capacitor required between Vdd and GND; the Vdd_YY option spans 1.62 V to 3.63 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2520-4P |
| Category | Resonators/Oscillators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Frequency Range | f | 1 | 110 | MHz | 1 | ||
| Operating Temperature Range (Industrial) | T_use | -40 | 85 | °C | Industrial | 1 | |
| Supply Voltage Option YY | Vdd_YY | 1.62 | 3.63 | V | Vdd_YY | 1 | |
| Current Consumption | Idd | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY | 1 | |
| OE Disable Current | I_OD | 4.2 | mA | Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. OE = GND, Output in high-Z state | 1 | ||
| Standby Current | I_std | 2.1 | 4.3 | A | ST = GND, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. Output is weakly pulled down | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 2 | |
| Rise/Fall Time | Tr, Tf | 2.7 | ns | 20% - 80% Vdd_YY | 2 | ||
| Output High Voltage | VOH | 90 | % | IOH = -4 mA (Vdd_3.0 and Vdd_3.3); IOH = -3 mA (Vdd_2.8 and Vdd_2.5); IOH = -2 mA (Vdd_1.8) | 2 | ||
| Output Low Voltage | VOL | 10 | % | IOL = 4 mA (Vdd_3.0 and Vdd_3.3); IOL = 3 mA (Vdd_2.8 and Vdd_2.5); IOL = 2 mA (Vdd_1.8) | 2 | ||
| Input High Voltage | VIH | 70 | % | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | % | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | k | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 130 | ns | f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles | 2 | ||
| Resume Time | T_resume | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 | ||
| RMS Period Jitter | T_jitt | 3.3 | ps | f = 75 MHz, Vdd_YY | 2 | ||
| Peak-to-peak Period Jitter | T_pk | 12 | 25 | ps | f = 75 MHz, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY | 2 | |
| RMS Phase Jitter (random) | T_phj | 1.4 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_YY | 2 | ||
| RMS Phase Jitter (random) | T_phj | 2.3 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_YY | 2 | ||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Thermal Resistance Junction-to-Ambient, 4 Layer Board (2520) | JA | 117 | °C/W | 4 Layer Board, JESD51 | 3 | ||
| Thermal Resistance Junction-to-Ambient, 2 Layer Board (2520) | JA | 222 | °C/W | 2 Layer Board, JESD51 | 3 | ||
| Thermal Resistance Junction-to-Case, Bottom (2520) | JC | 26 | °C/W | Bottom, JESD51 | 3 | ||
| Maximum Operating Junction Temperature at 85 °C Ambient | 95 | °C | Max operating ambient 85°C | 3 |
CAD (KiCad official)
- Symbol:
SIT8008BI-13-YYS-25.600000 - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
sit8008bi-13-yys-25-600000-etched.step/sit8008bi-13-yys-25-600000-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8008bi-13-yys-25-600000.step/sit8008bi-13-yys-25-600000.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
fcdbddbb6ff5c9c4, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).