Generated by kicad-footprint-generator · KiCad file format 20260206
SIT65HVD231DR
SIT · CAN Transceivers · SOP-8
SIT65HVD231DR from SIT, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D | input | CAN transmit data input (TXD, driver input): low drives a dominant bus state and high a recessive state, with MCU-side port voltage limited to -0.5 V to VCC+0.5 V. |
| 2 | GND | power_in | Ground connection; all device voltages are referenced to this pin. |
| 3 | VCC | power_in | 3.3 V transceiver supply voltage, specified at 3 V to 3.6 V (3.3 V ±10%), with an absolute maximum of -0.3 V to +6 V. |
| 4 | R | output | CAN receive data output (RXD, driver output): low when the bus is dominant and high when recessive, with output current limited to -11 mA to +11 mA. |
| 5 | Vref | power_in | Vcc/2 reference output, which holds between 0.45 VCC and 0.55 VCC for Iref within ±5 µA (0.4 VCC to 0.6 VCC for Iref within ±50 µA). |
| 6 | CANL | bidirectional | Low-level CAN bus line, with bus-side input voltage limited to -18 V to +18 V and transient voltage on pins 6 and 7 limited to -25 V to +25 V. |
| 7 | CANH | bidirectional | High-level CAN bus line, with bus-side input voltage limited to -18 V to +18 V and transient voltage on pins 6 and 7 limited to -25 V to +25 V. |
| 8 | RS | input | Mode select: tie to GND (below 1.2 V) for high-speed mode, to VCC (above 0.75 VCC) for low-power sleep mode, or to GND through a 10 kΩ to 100 kΩ resistor for slope-control mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SIT |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | Vcc | 3 | 3.6 | V | 1 | ||
| Maximum transfer rate (NRZ) | 1/tbit | 1 | Mbaud | 非归零码 | 1 | ||
| CANH, CANL input/output voltage | Vcan | -16 | 16 | V | 1 | ||
| Differential bus voltage | Vdiff | 1.5 | 3 | V | 1 | ||
| Ambient temperature | Tamb | -40 | 125 | ℃ | 1 | ||
| Supply voltage (absolute maximum) | VCC | -0.3 | 6 | V | 2 | ||
| MCU-side port voltage (D, R) | -0.5 | V | 2 | ||||
| Bus-side input voltage (CANL, CANH) | -18 | 18 | V | 2 | |||
| Transient voltage on pins 6, 7 | Vtr | -25 | 25 | V | 2 | ||
| Receiver output current | IO | -11 | 11 | mA | 2 | ||
| Storage operating temperature range | -40 | 150 | ℃ | 2 | |||
| Ambient temperature (absolute maximum) | -40 | 125 | ℃ | 2 | |||
| Soldering temperature range | 300 | ℃ | 2 | ||||
| Continuous power dissipation | 400 | mW | SOP8 | 2 | |||
| Dominant output voltage CANH | VO(D) | 2.45 | V | VI=0V,RS=0V,RL=60Ω | 3 | ||
| Dominant output voltage CANL | VO(D) | 0.5 | 1.25 | V | 3 | ||
| Dominant differential output voltage (Fig. 1) | VOD(D) | 1.5 | 2 | 3 | V | VI=0V,RS=0V,RL=60Ω(见图1) | 3 |
| Dominant differential output voltage (Fig. 3) | VOD(D) | 1.2 | 2 | 3 | V | VI=0V,RL=60Ω,RS=0V(见图3) | 3 |
| Recessive differential output voltage | VOD(R) | -0.12 | 0.012 | V | VI=3V, RS=0V | 3 | |
| Recessive differential output voltage, no load | VOD(R) | -0.5 | 0.05 | V | VI=3V, RS=0V, NO LOAD | 3 | |
| High-level output voltage | VOH | 2.4 | V | -6V<VID<500mV, IO=-8mA(见图5) | 4 | ||
| Low-level output voltage | VOL | 0.4 | V | 900mV<VID<6V, IO=8mA(见图5) | 4 | ||
| Receiver positive threshold | VIT+ | 750 | 900 | mV | 见表 1 | 4 | |
| Receiver negative threshold | VIT- | 500 | 650 | mV | 见表 1 | 4 | |
| Bus input current | Ii | -100 | -20 | μA | VIH=-2V,VCC=0V | 4 | |
| Bus input current | Ii | -200 | -30 | μA | VIH=-2V,VCC=3.3V | 4 | |
| Differential input resistance | Rdiff | 40 | 100 | KΩ | ISO 11898-2 对应标准 | 4 | |
| Bus input resistance | Ri | 20 | 35 | 50 | KΩ | ISO 11898-2 对应标准 | 4 |
| Thermal shutdown temperature | Tj(sd) | 155 | 165 | 180 | ℃ | 5 | |
| Reference output voltage (printed as 0.45VCC to 0.55VCC; VCC factor not included) | Vref | 0.45 | 0.55 | V | -5uA<Iref<5uA | 6 | |
| Reference output voltage (printed as 0.4VCC to 0.6VCC; VCC factor not included) | Vref | 0.4 | 0.6 | V | -50uA<Iref<50uA | 6 | |
| High-speed mode input current | IRS | -450 | 0 | μA | VRS<1V | 6 | |
| Sleep mode input voltage | VRS | 0.75 | V | 0<VRS<VCC | 6 | ||
| Power-down leakage current | Ioff | -250 | 250 | μA | Vcc=0V,VCANH=VCANL=5V | 6 | |
| Differential output rise time | tr | 25 | 50 | 100 | ns | R=0,即短路(见图 4) | 4 |
| Differential output rise time | tr | 80 | 120 | 160 | ns | R=10 kΩ | 4 |
| Differential output rise time | tr | 600 | 800 | 1200 | ns | R=100 kΩ | 4 |
| Differential output fall time | tf | 40 | 55 | 80 | ns | R=0,即短路(见图 4) | 4 |
| Differential output fall time | tf | 80 | 125 | 150 | ns | R=10 kΩ | 4 |
| Differential output fall time | tf | 600 | 825 | 1000 | ns | R=100 kΩ | 4 |
| Driver propagation delay low-to-high | tPLH | 35 | 85 | ns | R=0,即短路(见图 4) | 3 | |
| Driver propagation delay low-to-high | tPLH | 70 | 125 | ns | R=10 kΩ | 3 | |
| Driver propagation delay low-to-high | tPLH | 500 | 870 | ns | R=100 kΩ | 3 | |
| Driver propagation delay high-to-low | tPHL | 70 | 120 | ns | R=0,即短路(见图 4) | 3 | |
| Driver propagation delay high-to-low | tPHL | 130 | 180 | ns | R=10 kΩ | 3 | |
| Driver propagation delay high-to-low | tPHL | 870 | 1200 | ns | R=100 kΩ | 3 | |
| Receiver propagation delay low-to-high | tPLH | 35 | 50 | ns | 见图 6 | 5 | |
| Receiver propagation delay high-to-low | tPHL | 35 | 50 | ns | 见图 6 | 5 | |
| Loop delay 1 (driver input to receiver output, recessive to dominant) | t(LOOP1) | 70 | 115 | ns | R=0,即短路(见图8) | 5 | |
| Loop delay 1 (driver input to receiver output, recessive to dominant) | t(LOOP1) | 105 | 175 | ns | R=10 kΩ | 5 | |
| Loop delay 1 (driver input to receiver output, recessive to dominant) | t(LOOP1) | 535 | 920 | ns | R=100 kΩ | 5 | |
| Loop delay 2 (driver input to receiver output, dominant to recessive) | t(LOOP2) | 100 | 135 | ns | R=0,即短路(见图8) | 5 | |
| Loop delay 2 (driver input to receiver output, dominant to recessive) | t(LOOP2) | 155 | 185 | ns | R=10 kΩ | 5 | |
| Loop delay 2 (driver input to receiver output, dominant to recessive) | t(LOOP2) | 830 | 990 | ns | R=100 kΩ | 5 | |
| Sleep mode supply current | ICC | 0.04 | 1 | μA | RS=VCC, VI=VCC | 6 | |
| Dominant mode power consumption | 50 | 70 | mA | VI=0V, RS=0V, LOAD=60Ω | 6 | ||
| Recessive mode power consumption | 6 | 10 | mA | VI=VCC, RS=0V, NO LOAD | 6 | ||
| Sleep-to-wake time | TWAKE | 3 | 5 | us | RS 加入方波(见图7) | 6 | |
| Bus input current | Ii | 100 | 350 | μA | VIH=7V,VCC=0V | 4 | |
| Bus input current | Ii | 100 | 250 | μA | VIH=7V,VCC=3.3V | 4 |
CAD (KiCad official)
- Symbol:
SIT65HVD231DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
sit65hvd231dr-etched.step/sit65hvd231dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit65hvd231dr.step/sit65hvd231dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SIT datasheet (13 pp, sha256
41f4e8360cf3a745, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).