Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SIT65HVD231DR

SIT · CAN Transceivers · SOP-8

SIT65HVD231DR from SIT, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D input CAN transmit data input (TXD, driver input): low drives a dominant bus state and high a recessive state, with MCU-side port voltage limited to -0.5 V to VCC+0.5 V.
2 GND power_in Ground connection; all device voltages are referenced to this pin.
3 VCC power_in 3.3 V transceiver supply voltage, specified at 3 V to 3.6 V (3.3 V ±10%), with an absolute maximum of -0.3 V to +6 V.
4 R output CAN receive data output (RXD, driver output): low when the bus is dominant and high when recessive, with output current limited to -11 mA to +11 mA.
5 Vref power_in Vcc/2 reference output, which holds between 0.45 VCC and 0.55 VCC for Iref within ±5 µA (0.4 VCC to 0.6 VCC for Iref within ±50 µA).
6 CANL bidirectional Low-level CAN bus line, with bus-side input voltage limited to -18 V to +18 V and transient voltage on pins 6 and 7 limited to -25 V to +25 V.
7 CANH bidirectional High-level CAN bus line, with bus-side input voltage limited to -18 V to +18 V and transient voltage on pins 6 and 7 limited to -25 V to +25 V.
8 RS input Mode select: tie to GND (below 1.2 V) for high-speed mode, to VCC (above 0.75 VCC) for low-power sleep mode, or to GND through a 10 kΩ to 100 kΩ resistor for slope-control mode.

Key specifications

Parameter Value
Manufacturer SIT
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage Vcc 3 3.6 V 1
Maximum transfer rate (NRZ) 1/tbit 1 Mbaud 非归零码 1
CANH, CANL input/output voltage Vcan -16 16 V 1
Differential bus voltage Vdiff 1.5 3 V 1
Ambient temperature Tamb -40 125 ℃ 1
Supply voltage (absolute maximum) VCC -0.3 6 V 2
MCU-side port voltage (D, R) -0.5 V 2
Bus-side input voltage (CANL, CANH) -18 18 V 2
Transient voltage on pins 6, 7 Vtr -25 25 V 2
Receiver output current IO -11 11 mA 2
Storage operating temperature range -40 150 ℃ 2
Ambient temperature (absolute maximum) -40 125 ℃ 2
Soldering temperature range 300 ℃ 2
Continuous power dissipation 400 mW SOP8 2
Dominant output voltage CANH VO(D) 2.45 V VI=0V,RS=0V,RL=60Ω 3
Dominant output voltage CANL VO(D) 0.5 1.25 V 3
Dominant differential output voltage (Fig. 1) VOD(D) 1.5 2 3 V VI=0V,RS=0V,RL=60Ω(见图1) 3
Dominant differential output voltage (Fig. 3) VOD(D) 1.2 2 3 V VI=0V,RL=60Ω,RS=0V(见图3) 3
Recessive differential output voltage VOD(R) -0.12 0.012 V VI=3V, RS=0V 3
Recessive differential output voltage, no load VOD(R) -0.5 0.05 V VI=3V, RS=0V, NO LOAD 3
High-level output voltage VOH 2.4 V -6V<VID<500mV, IO=-8mA(见图5) 4
Low-level output voltage VOL 0.4 V 900mV<VID<6V, IO=8mA(见图5) 4
Receiver positive threshold VIT+ 750 900 mV 见表 1 4
Receiver negative threshold VIT- 500 650 mV 见表 1 4
Bus input current Ii -100 -20 μA VIH=-2V,VCC=0V 4
Bus input current Ii -200 -30 μA VIH=-2V,VCC=3.3V 4
Differential input resistance Rdiff 40 100 KΩ ISO 11898-2 对应标准 4
Bus input resistance Ri 20 35 50 KΩ ISO 11898-2 对应标准 4
Thermal shutdown temperature Tj(sd) 155 165 180 ℃ 5
Reference output voltage (printed as 0.45VCC to 0.55VCC; VCC factor not included) Vref 0.45 0.55 V -5uA<Iref<5uA 6
Reference output voltage (printed as 0.4VCC to 0.6VCC; VCC factor not included) Vref 0.4 0.6 V -50uA<Iref<50uA 6
High-speed mode input current IRS -450 0 μA VRS<1V 6
Sleep mode input voltage VRS 0.75 V 0<VRS<VCC 6
Power-down leakage current Ioff -250 250 μA Vcc=0V,VCANH=VCANL=5V 6
Differential output rise time tr 25 50 100 ns R=0,即短路(见图 4) 4
Differential output rise time tr 80 120 160 ns R=10 kΩ 4
Differential output rise time tr 600 800 1200 ns R=100 kΩ 4
Differential output fall time tf 40 55 80 ns R=0,即短路(见图 4) 4
Differential output fall time tf 80 125 150 ns R=10 kΩ 4
Differential output fall time tf 600 825 1000 ns R=100 kΩ 4
Driver propagation delay low-to-high tPLH 35 85 ns R=0,即短路(见图 4) 3
Driver propagation delay low-to-high tPLH 70 125 ns R=10 kΩ 3
Driver propagation delay low-to-high tPLH 500 870 ns R=100 kΩ 3
Driver propagation delay high-to-low tPHL 70 120 ns R=0,即短路(见图 4) 3
Driver propagation delay high-to-low tPHL 130 180 ns R=10 kΩ 3
Driver propagation delay high-to-low tPHL 870 1200 ns R=100 kΩ 3
Receiver propagation delay low-to-high tPLH 35 50 ns 见图 6 5
Receiver propagation delay high-to-low tPHL 35 50 ns 见图 6 5
Loop delay 1 (driver input to receiver output, recessive to dominant) t(LOOP1) 70 115 ns R=0,即短路(见图8) 5
Loop delay 1 (driver input to receiver output, recessive to dominant) t(LOOP1) 105 175 ns R=10 kΩ 5
Loop delay 1 (driver input to receiver output, recessive to dominant) t(LOOP1) 535 920 ns R=100 kΩ 5
Loop delay 2 (driver input to receiver output, dominant to recessive) t(LOOP2) 100 135 ns R=0,即短路(见图8) 5
Loop delay 2 (driver input to receiver output, dominant to recessive) t(LOOP2) 155 185 ns R=10 kΩ 5
Loop delay 2 (driver input to receiver output, dominant to recessive) t(LOOP2) 830 990 ns R=100 kΩ 5
Sleep mode supply current ICC 0.04 1 μA RS=VCC, VI=VCC 6
Dominant mode power consumption 50 70 mA VI=0V, RS=0V, LOAD=60Ω 6
Recessive mode power consumption 6 10 mA VI=VCC, RS=0V, NO LOAD 6
Sleep-to-wake time TWAKE 3 5 us RS 加入方波(见图7) 6
Bus input current Ii 100 350 μA VIH=7V,VCC=0V 4
Bus input current Ii 100 250 μA VIH=7V,VCC=3.3V 4

CAD (KiCad official)

  • Symbol: SIT65HVD231DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: sit65hvd231dr-etched.step / sit65hvd231dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit65hvd231dr.step / sit65hvd231dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SIT datasheet (13 pp, sha256 41f4e8360cf3a745, retrieved 2026-10-19, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF