SIT3232EEUE

{
 "schema": "adom.pads/1",
 "slug": "sit3232eeue",
 "footprint": "TSSOP-16_4.4x5mm_P0.65mm",
 "generated_from": {
  "footprint": "TSSOP-16_4.4x5mm_P0.65mm@sha256:fbac79fc5f310754",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.8625,
   -2.275
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TSSOP-16_4.4x5mm_P0.65mm@sha256:fbac79fc5f310754"
 },
 "pad_count": 16,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "C1+",
   "type": "passive",
   "description": "Positive terminal of the first charge-pump flying capacitor (C1). Connect a 1µF capacitor between C1+ and C1- to enable the voltage-doubler stage that generates V+.",
   "is_pin1": true,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "V+",
   "type": "power_out",
   "description": "Doubled positive supply output from the internal charge pump (approximately +2×VCC). Bypass to GND with a 1µF capacitor. Absolute max VCC-0.3 to +7V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "C1-",
   "type": "passive",
   "description": "Negative terminal of the first charge-pump flying capacitor (C1). Pairs with C1+ via a 1µF external capacitor.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "C2+",
   "type": "passive",
   "description": "Positive terminal of the second charge-pump flying capacitor (C2). Connect a 1µF capacitor between C2+ and C2- to enable the inverter stage that generates V-.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "C2-",
   "type": "passive",
   "description": "Negative terminal of the second charge-pump flying capacitor (C2). Pairs with C2+ via a 1µF external capacitor.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "V-",
   "type": "power_out",
   "description": "Inverted (negative) supply output from the internal charge pump (approximately -2×VCC). Bypass to GND with a 1µF capacitor. Absolute max +0.3 to -7V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "T2OUT",
   "type": "output",
   "description": "Second RS-232 transmitter output (driver 2). Drives the external RS-232 line at ±4 to ±5V into a 3kΩ load; ESD protected to ±15kV HBM / ±8kV IEC contact. Absolute max output swing ±13.2V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "R2IN",
   "type": "input",
   "description": "Second RS-232 receiver input (receiver 2). Accepts ±25V RS-232-level signals; input impedance 3-7kΩ typ 5kΩ; thresholds VRIL 0.6V min / VRIH 2.4V max at VCC=3.3V. ESD protected to ±15kV HBM.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "R2OUT",
   "type": "output",
   "description": "Second receiver logic-level output (CMOS). Drives VCC-referenced logic: VOL ≤ 0.4V @ 1.6mA, VOH ≥ VCC-0.6V @ 0.5mA.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "T2IN",
   "type": "input",
   "description": "Second transmitter logic input (CMOS/TTL). VIL ≤ 0.8V, VIH ≥ 2V, 0.3V typ hysteresis, input current ≤ ±1µA. Absolute max -0.3 to +6V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "T1IN",
   "type": "input",
   "description": "First transmitter logic input (CMOS/TTL). VIL ≤ 0.8V, VIH ≥ 2V, 0.3V typ hysteresis, input current ≤ ±1µA. Absolute max -0.3 to +6V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "R1OUT",
   "type": "output",
   "description": "First receiver logic-level output (CMOS). Drives VCC-referenced logic: VOL ≤ 0.4V @ 1.6mA, VOH ≥ VCC-0.6V @ 0.5mA.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "R1IN",
   "type": "input",
   "description": "First RS-232 receiver input (receiver 1). Accepts ±25V RS-232-level signals; input impedance 3-7kΩ typ 5kΩ; thresholds VRIL 0.6V min / VRIH 2.4V max at VCC=3.3V. ESD protected to ±15kV HBM.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "T1OUT",
   "type": "output",
   "description": "First RS-232 transmitter output (driver 1). Drives the external RS-232 line at ±4 to ±5V into a 3kΩ load; short-circuit current 60mA max; ESD protected to ±15kV HBM / ±8kV IEC contact.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference for all signals and the charge pump.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "16",
   "name": "VCC",
   "type": "power_in",
   "description": "Positive supply input, 3.0V to 5.5V (typ 3.3V). Bypass to GND with a 1µF capacitor. Absolute max -0.3 to +6V; typical supply current 2mA (no load).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}