main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sit1602bi-22-18e-25-000000e: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
sit1602bi-22-18e-25-000000e-etched.glb Publish 0.1.0 · Ray
sit1602bi-22-18e-25-000000e-etched.step sit1602bi-22-18e-25-000000e: factory component page (tier=lcsc) · Ray
sit1602bi-22-18e-25-000000e-hero.glb sit1602bi-22-18e-25-000000e: hero GLB from the etched model (keeps the MPN mark) · Ray
sit1602bi-22-18e-25-000000e-hero.overlay.json Publish 0.1.0 · Ray
sit1602bi-22-18e-25-000000e.glb Publish 0.1.0 · Ray
sit1602bi-22-18e-25-000000e.kicad_mod Publish 0.1.0 · Ray
sit1602bi-22-18e-25-000000e.kicad_sym Publish 0.1.0 · Ray
sit1602bi-22-18e-25-000000e.lbr Publish 0.1.0 · Ray
sit1602bi-22-18e-25-000000e.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 4 pins · Ray

SIT1602BI-22-18E-25.000000E

SiTime · Pre-programmed Oscillators · SMD3225-4P

SIT1602BI-22-18E-25.000000E from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Output enable input (feature code E): logic high (at least 70% Vdd) gives the specified frequency output, and logic low (at most 30% Vdd) puts the output in high impedance with only the output driver disabled, with an internal pull-up of 50 to 150 kΩ and a pull-up of 10 kΩ or less recommended if the pin is not externally driven.
2 GND power_in Electrical ground.
3 OUT output LVCMOS/HCMOS-compatible oscillator clock output, with output high at least 90% Vdd and output low at most 10% Vdd at the stated IOH/IOL and 15 pF load.
4 VDD power_in Power supply voltage for the 1.8 V variant (18 code) rated 1.62 V to 1.98 V, with a capacitor of 0.1 µF or higher required between Vdd and GND.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD3225-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency stability (inclusive of initial tolerance, 1st-year aging, temperature, supply and load) F_stab -25 25 ppm Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load 1
Operating Temperature Range (Industrial) T_use -40 85 °C Industrial 1
Supply Voltage (Vdd_1.8 option) Vdd_1.8 1.62 1.8 1.98 V Vdd_1.8 supply option 1
Current Consumption (Vdd_1.8) Idd 3.5 4.1 mA No load condition, f = 20 MHz, Vdd_1.8 1
OE Disable Current (Vdd_1.8) I_OD 4 mA Vdd_1.8. OE = GND, Output in high-Z state 1
Duty Cycle DC 45 55 % All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 2
Rise/Fall Time (20% to 80%, Vdd_1.8) Tr, Tf 1.3 2.5 ns 20% - 80% Vdd_1.8 2
Output High Voltage VOH 90 % Vdd IOH = -2 mA (Vdd_1.8) 2
Output Low Voltage VOL 10 % Vdd IOH = -2 mA (Vdd_1.8) 2
Input High Voltage VIH 70 % Vdd Pin 1, OE or ST 2
Input Low Voltage VIL 30 % Vdd Pin 1, OE or ST 2
Input Pull-up Impedance Z_in 50 87 150 kΩ Pin 1, OE logic high or logic low, or ST logic high 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 138 ns f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3*cycles 2
RMS Period Jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX 2
Peak-to-peak Period Jitter (Vdd_1.8) T_pk 14 30 ps f = 75 MHz, Vdd_1.8 2
RMS Phase Jitter (random), 900 kHz to 7.5 MHz T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz, Vdd_1.8 2
RMS Phase Jitter (random), 12 kHz to 20 MHz T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz, Vdd_1.8 2
Storage Temperature -65 150 °C 3
Supply Voltage Vdd Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C Follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C 3
Pull-up resistor on pin 1 (OE/ST mode) 10 kΩ OE or ST mode, pin 1 not externally driven (10 kΩ or less recommended) 2
Supply decoupling capacitor between Vdd and GND 0.1 µF Between Vdd and GND 2
Thermal resistance, junction-to-ambient, 4-layer board (3225 package) θJA 109 °C/W JA, 4 Layer Board, 3225 package 3
Thermal resistance, junction-to-ambient, 2-layer board (3225 package) θJA 212 °C/W JA, 2 Layer Board, 3225 package 3
Thermal resistance, junction-to-case, bottom (3225 package) θJC 27 °C/W JC, Bottom, 3225 package 3
Maximum Operating Junction Temperature 95 °C Maximum operating ambient temperature 85°C 3

CAD (KiCad official)

  • Symbol: SIT1602BI-22-18E-25.000000E
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: sit1602bi-22-18e-25-000000e-etched.step / sit1602bi-22-18e-25-000000e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit1602bi-22-18e-25-000000e.step / sit1602bi-22-18e-25-000000e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (18 pp, sha256 70f0fbf9f24afbd0, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF