3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT1602BI-22-18E-25.000000E
SiTime · Pre-programmed Oscillators · SMD3225-4P
SIT1602BI-22-18E-25.000000E from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Output enable input (feature code E): logic high (at least 70% Vdd) gives the specified frequency output, and logic low (at most 30% Vdd) puts the output in high impedance with only the output driver disabled, with an internal pull-up of 50 to 150 kΩ and a pull-up of 10 kΩ or less recommended if the pin is not externally driven. |
| 2 | GND | power_in | Electrical ground. |
| 3 | OUT | output | LVCMOS/HCMOS-compatible oscillator clock output, with output high at least 90% Vdd and output low at most 10% Vdd at the stated IOH/IOL and 15 pF load. |
| 4 | VDD | power_in | Power supply voltage for the 1.8 V variant (18 code) rated 1.62 V to 1.98 V, with a capacitor of 0.1 µF or higher required between Vdd and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD3225-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency stability (inclusive of initial tolerance, 1st-year aging, temperature, supply and load) | F_stab | -25 | 25 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load | 1 | |
| Operating Temperature Range (Industrial) | T_use | -40 | 85 | °C | Industrial | 1 | |
| Supply Voltage (Vdd_1.8 option) | Vdd_1.8 | 1.62 | 1.8 | 1.98 | V | Vdd_1.8 supply option | 1 |
| Current Consumption (Vdd_1.8) | Idd | 3.5 | 4.1 | mA | No load condition, f = 20 MHz, Vdd_1.8 | 1 | |
| OE Disable Current (Vdd_1.8) | I_OD | 4 | mA | Vdd_1.8. OE = GND, Output in high-Z state | 1 | ||
| Duty Cycle | DC | 45 | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 2 | |
| Rise/Fall Time (20% to 80%, Vdd_1.8) | Tr, Tf | 1.3 | 2.5 | ns | 20% - 80% Vdd_1.8 | 2 | |
| Output High Voltage | VOH | 90 | % Vdd | IOH = -2 mA (Vdd_1.8) | 2 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOH = -2 mA (Vdd_1.8) | 2 | ||
| Input High Voltage | VIH | 70 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | kΩ | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 138 | ns | f = 77.76 MHz. For other frequencies, T_oe = 100 ns + 3*cycles | 2 | ||
| RMS Period Jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX | 2 | |
| Peak-to-peak Period Jitter (Vdd_1.8) | T_pk | 14 | 30 | ps | f = 75 MHz, Vdd_1.8 | 2 | |
| RMS Phase Jitter (random), 900 kHz to 7.5 MHz | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz, Vdd_1.8 | 2 | |
| RMS Phase Jitter (random), 12 kHz to 20 MHz | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz, Vdd_1.8 | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage Vdd | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | Follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Pull-up resistor on pin 1 (OE/ST mode) | 10 | kΩ | OE or ST mode, pin 1 not externally driven (10 kΩ or less recommended) | 2 | |||
| Supply decoupling capacitor between Vdd and GND | 0.1 | µF | Between Vdd and GND | 2 | |||
| Thermal resistance, junction-to-ambient, 4-layer board (3225 package) | θJA | 109 | °C/W | JA, 4 Layer Board, 3225 package | 3 | ||
| Thermal resistance, junction-to-ambient, 2-layer board (3225 package) | θJA | 212 | °C/W | JA, 2 Layer Board, 3225 package | 3 | ||
| Thermal resistance, junction-to-case, bottom (3225 package) | θJC | 27 | °C/W | JC, Bottom, 3225 package | 3 | ||
| Maximum Operating Junction Temperature | 95 | °C | Maximum operating ambient temperature 85°C | 3 |
CAD (KiCad official)
- Symbol:
SIT1602BI-22-18E-25.000000E - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sit1602bi-22-18e-25-000000e-etched.step/sit1602bi-22-18e-25-000000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit1602bi-22-18e-25-000000e.step/sit1602bi-22-18e-25-000000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
70f0fbf9f24afbd0, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).