main
Ray Publish 0.1.0 d1f0f44

SIT1602BC-13-18S-12.000000E

SiTime · Pre-programmed Oscillators · SMD2520-4P

SIT1602BC-13-18S-12.000000E from SiTime, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ST input Standby input (this MPN's feature-pin code S): logic high gives the specified frequency output, logic low puts the device in sleep mode with the output low (weak pull-down) and supply current reduced to I_std; VIH is at least 70% Vdd and VIL is at most 30% Vdd.
2 GND power_in Electrical ground.
3 OUT output Oscillator output (LVCMOS/HCMOS compatible).
4 VDD power_in Power supply voltage, 1.62 V to 1.98 V for the 1.8 V option (code 18), with a 0.1 µF or larger capacitor required between Vdd and GND.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2520-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Stability F_stab -50 50 ppm Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load 1
Operating Temperature Range T_use -20 70 °C Extended Commercial 1
Supply Voltage Vdd_1.8 1.62 1.8 1.98 V 1
Current Consumption Idd 3.5 4.1 mA No load condition, f = 20 MHz, Vdd_1.8 1
Standby Current I_std 0.6 1.3 µA ST = GND, Vdd_1.8, Output is weakly pulled down 1
Duty Cycle DC 45 55 % All Vdds 2
Rise/Fall Time Tr, Tf 1.3 2.5 ns 20% - 80% Vdd_1.8 2
Output High Voltage VOH 90 % Vdd IOH = -2 mA (Vdd_1.8) 2
Output Low Voltage VOL 10 % Vdd IOH = -2 mA (Vdd_1.8) 2
Input High Voltage VIH 70 % Vdd Pin 1, OE or ST 2
Input Low Voltage VIL 30 % Vdd Pin 1, OE or ST 2
Input Pull-up Impedance Z_in 50 87 150 kΩ Pin 1, OE logic high or logic low, or ST logic high 2
Input Impedance, ST low Z_in 2 MΩ Pin 1, ST logic low 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Resume Time T_resume 5 ms Measured from the time ST pin crosses 50% threshold 2
RMS Period Jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd_1.8 2
Peak-to-peak Period Jitter T_pk 14 30 ps f = 75 MHz, Vdd_1.8 2
RMS Phase Jitter (random) 900 kHz to 7.5 MHz T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz, Vdd_1.8 2
RMS Phase Jitter (random) 12 kHz to 20 MHz T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz, Vdd_1.8 2
Storage Temperature -65 150 °C 3
Supply Voltage (absolute maximum) Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C Exceeding this temperature for extended period of time may damage the device 3
Maximum Operating Junction Temperature 80 °C Max operating temperature (ambient) 70°C 3
Thermal Resistance Junction-Ambient, 4 Layer, 2520 θJA 117 °C/W 2520 package, 4 Layer Board 3
Thermal Resistance Junction-Ambient, 2 Layer, 2520 θJA 222 °C/W 2520 package, 2 Layer Board 3
Thermal Resistance Junction-Case, Bottom, 2520 θJC 26 °C/W 2520 package, Bottom 3
Output Frequency f 12 MHz Nominal frequency per MPN 13

CAD (KiCad official)

  • Symbol: SIT1602BC-13-18S-12.000000E
  • Footprint: Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm
  • 3D model: SMD2520-4P (KiCad packages3D, STEP)
  • 3D model files: sit1602bc-13-18s-12-000000e-etched.step / sit1602bc-13-18s-12-000000e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit1602bc-13-18s-12-000000e.step / sit1602bc-13-18s-12-000000e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (18 pp, sha256 70f0fbf9f24afbd0, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF