Generated by kicad-footprint-generator · KiCad file format 20260206
SIT1602BC-13-18S-12.000000E
SiTime · Pre-programmed Oscillators · SMD2520-4P
SIT1602BC-13-18S-12.000000E from SiTime, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ST | input | Standby input (this MPN's feature-pin code S): logic high gives the specified frequency output, logic low puts the device in sleep mode with the output low (weak pull-down) and supply current reduced to I_std; VIH is at least 70% Vdd and VIL is at most 30% Vdd. |
| 2 | GND | power_in | Electrical ground. |
| 3 | OUT | output | Oscillator output (LVCMOS/HCMOS compatible). |
| 4 | VDD | power_in | Power supply voltage, 1.62 V to 1.98 V for the 1.8 V option (code 18), with a 0.1 µF or larger capacitor required between Vdd and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2520-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Stability | F_stab | -50 | 50 | ppm | Inclusive of initial tolerance at 25°C, 1st year aging at 25°C, and variations over operating temperature, rated power supply voltage and load | 1 | |
| Operating Temperature Range | T_use | -20 | 70 | °C | Extended Commercial | 1 | |
| Supply Voltage | Vdd_1.8 | 1.62 | 1.8 | 1.98 | V | 1 | |
| Current Consumption | Idd | 3.5 | 4.1 | mA | No load condition, f = 20 MHz, Vdd_1.8 | 1 | |
| Standby Current | I_std | 0.6 | 1.3 | µA | ST = GND, Vdd_1.8, Output is weakly pulled down | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdds | 2 | |
| Rise/Fall Time | Tr, Tf | 1.3 | 2.5 | ns | 20% - 80% Vdd_1.8 | 2 | |
| Output High Voltage | VOH | 90 | % Vdd | IOH = -2 mA (Vdd_1.8) | 2 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOH = -2 mA (Vdd_1.8) | 2 | ||
| Input High Voltage | VIH | 70 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | kΩ | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Input Impedance, ST low | Z_in | 2 | MΩ | Pin 1, ST logic low | 2 | ||
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Resume Time | T_resume | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 | ||
| RMS Period Jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd_1.8 | 2 | |
| Peak-to-peak Period Jitter | T_pk | 14 | 30 | ps | f = 75 MHz, Vdd_1.8 | 2 | |
| RMS Phase Jitter (random) 900 kHz to 7.5 MHz | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz, Vdd_1.8 | 2 | |
| RMS Phase Jitter (random) 12 kHz to 20 MHz | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz, Vdd_1.8 | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage (absolute maximum) | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | Exceeding this temperature for extended period of time may damage the device | 3 | |||
| Maximum Operating Junction Temperature | 80 | °C | Max operating temperature (ambient) 70°C | 3 | |||
| Thermal Resistance Junction-Ambient, 4 Layer, 2520 | θJA | 117 | °C/W | 2520 package, 4 Layer Board | 3 | ||
| Thermal Resistance Junction-Ambient, 2 Layer, 2520 | θJA | 222 | °C/W | 2520 package, 2 Layer Board | 3 | ||
| Thermal Resistance Junction-Case, Bottom, 2520 | θJC | 26 | °C/W | 2520 package, Bottom | 3 | ||
| Output Frequency | f | 12 | MHz | Nominal frequency per MPN | 13 |
CAD (KiCad official)
- Symbol:
SIT1602BC-13-18S-12.000000E - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
sit1602bc-13-18s-12-000000e-etched.step/sit1602bc-13-18s-12-000000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit1602bc-13-18s-12-000000e.step/sit1602bc-13-18s-12-000000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
70f0fbf9f24afbd0, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).