main
Ray Publish 0.1.0 58af694

SIT1602AC-12-33E-4.096000G

SiTime · Programmable Oscillators · SMD2520-4P

SIT1602AC-12-33E-4.096000G from SiTime, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST input Multi-function control pin: in OE mode, high or open gives the specified output and low puts the output in high impedance; in ST mode, high or open gives the output and low sets the output low and puts the device in sleep mode, and VIH is 70% Vdd and VIL is 30% Vdd with an internal pull-up of about 87-100 kΩ.
2 GND power_in Electrical ground; a 0.1 µF capacitor between Vdd and GND is required.
3 OUT output Oscillator LVCMOS/HCMOS clock output with 10% to 90% Vdd output-level specifications and 20% to 80% rise/fall time that depends on the programmable drive strength.
4 VDD power_in Power supply voltage, with an absolute maximum range of -0.5 V to 4 V and a 0.1 µF decoupling capacitor required between Vdd and GND.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2520-4P
Category Crystals, Oscillators, Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Vdd 2.97 3.3 3.63 V 1
Operating Temperature Range T_use -20 70 °C Extended Commercial (ordering code C) 1
Frequency Stability F_stab -25 25 PPM 1
Current Consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V 1
OE Disable Current I_OD 4 mA Vdd = 2.5V to 3.3V, OE = GND, output is Weakly Pulled Down 1
Duty Cycle DC 45 55 % All Vdds 1
Rise/Fall Time Tr, Tf 1 2 ns Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% 1
Output High Voltage VOH 90 % Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V) 1
Output Low Voltage VOL 10 % Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V) 1
Input High Voltage VIH 70 % Vdd Pin 1, OE or ST 1
Input Low Voltage VIL 30 % Vdd Pin 1, OE or ST 1
Input Pull-up Impedance Z_in 87 100 k Pin 1, OE logic high or logic low, or ST logic high 1
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 130 ns f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
RMS Period Jitter T_jitt 1.76 3 ps f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V 2
RMS Phase Jitter (random), 900 kHz to 7.5 MHz T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz 2
RMS Phase Jitter (random), 12 kHz to 20 MHz T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz 2
Storage Temperature -65 150 °C 2
VDD Supply Voltage (absolute) VDD -0.5 4 V 2
Electrostatic Discharge 2000 V 2
Soldering Temperature 260 °C Follow standard Pb free soldering guidelines 2
Junction Temperature 150 °C 2
Thermal Resistance Junction-to-Ambient, 4 Layer Board (2520 package) JA 117 °C/W 4 Layer Board 2
Thermal Resistance Junction-to-Ambient, 2 Layer Board (2520 package) JA 222 °C/W 2 Layer Board 2
Thermal Resistance Junction-to-Case, Bottom (2520 package) JC 26 °C/W Bottom 2

CAD (KiCad official)

  • Symbol: SIT1602AC-12-33E-4.096000G
  • Footprint: Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm
  • 3D model: SMD2520-4P (KiCad packages3D, STEP)
  • 3D model files: sit1602ac-12-33e-4-096000g-etched.step / sit1602ac-12-33e-4-096000g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit1602ac-12-33e-4-096000g.step / sit1602ac-12-33e-4-096000g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (16 pp, sha256 a5ccaa7d007f166f, retrieved 2026-10-14, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF