Generated by kicad-footprint-generator · KiCad file format 20260206
SIT1602AC-12-33E-4.096000G
SiTime · Programmable Oscillators · SMD2520-4P
SIT1602AC-12-33E-4.096000G from SiTime, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST | input | Multi-function control pin: in OE mode, high or open gives the specified output and low puts the output in high impedance; in ST mode, high or open gives the output and low sets the output low and puts the device in sleep mode, and VIH is 70% Vdd and VIL is 30% Vdd with an internal pull-up of about 87-100 kΩ. |
| 2 | GND | power_in | Electrical ground; a 0.1 µF capacitor between Vdd and GND is required. |
| 3 | OUT | output | Oscillator LVCMOS/HCMOS clock output with 10% to 90% Vdd output-level specifications and 20% to 80% rise/fall time that depends on the programmable drive strength. |
| 4 | VDD | power_in | Power supply voltage, with an absolute maximum range of -0.5 V to 4 V and a 0.1 µF decoupling capacitor required between Vdd and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2520-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | Vdd | 2.97 | 3.3 | 3.63 | V | 1 | |
| Operating Temperature Range | T_use | -20 | 70 | °C | Extended Commercial (ordering code C) | 1 | |
| Frequency Stability | F_stab | -25 | 25 | PPM | 1 | ||
| Current Consumption | Idd | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd = 2.8V to 3.3V | 1 | |
| OE Disable Current | I_OD | 4 | mA | Vdd = 2.5V to 3.3V, OE = GND, output is Weakly Pulled Down | 1 | ||
| Duty Cycle | DC | 45 | 55 | % | All Vdds | 1 | |
| Rise/Fall Time | Tr, Tf | 1 | 2 | ns | Vdd = 2.5V, 2.8V, 3.0V or 3.3V, 20% - 80% | 1 | |
| Output High Voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd = 3.0V or 3.3V) | 1 | ||
| Output Low Voltage | VOL | 10 | % Vdd | IOL = 4 mA (Vdd = 3.0V or 3.3V) | 1 | ||
| Input High Voltage | VIH | 70 | % Vdd | Pin 1, OE or ST | 1 | ||
| Input Low Voltage | VIL | 30 | % Vdd | Pin 1, OE or ST | 1 | ||
| Input Pull-up Impedance | Z_in | 87 | 100 | k | Pin 1, OE logic high or logic low, or ST logic high | 1 | |
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 130 | ns | f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles | 2 | ||
| RMS Period Jitter | T_jitt | 1.76 | 3 | ps | f = 75 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V | 2 | |
| RMS Phase Jitter (random), 900 kHz to 7.5 MHz | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz | 2 | |
| RMS Phase Jitter (random), 12 kHz to 20 MHz | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz | 2 | |
| Storage Temperature | -65 | 150 | °C | 2 | |||
| VDD Supply Voltage (absolute) | VDD | -0.5 | 4 | V | 2 | ||
| Electrostatic Discharge | 2000 | V | 2 | ||||
| Soldering Temperature | 260 | °C | Follow standard Pb free soldering guidelines | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Thermal Resistance Junction-to-Ambient, 4 Layer Board (2520 package) | JA | 117 | °C/W | 4 Layer Board | 2 | ||
| Thermal Resistance Junction-to-Ambient, 2 Layer Board (2520 package) | JA | 222 | °C/W | 2 Layer Board | 2 | ||
| Thermal Resistance Junction-to-Case, Bottom (2520 package) | JC | 26 | °C/W | Bottom | 2 |
CAD (KiCad official)
- Symbol:
SIT1602AC-12-33E-4.096000G - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
sit1602ac-12-33e-4-096000g-etched.step/sit1602ac-12-33e-4-096000g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit1602ac-12-33e-4-096000g.step/sit1602ac-12-33e-4-096000g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (16 pp, sha256
a5ccaa7d007f166f, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).