main
Ray
Publish 0.1.0
fe046f6
SiLM2661CA-DG
Sillumin · Gate Drivers · SOP-8
SiLM2661CA-DG from Sillumin, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDDCP | power_out | Charge pump output; connect a minimum 470 nF capacitor between VDDCP and BAT and do not add any load on this pin. |
| 2 | BAT | power_in | Top of the battery stack; the battery cell input supply operates over 8 V to 90 V. |
| 3 | CHG_EN | input | Charge FET enable; digital input with VIL max 0.6 V and VIH min 1.2 V, internally pulled down, and an absolute maximum rating of 15 V (-0.3 V to 15 V). |
| 4 | DSG_EN | input | Discharge FET enable; digital input with VIL max 0.6 V and VIH min 1.2 V, internally pulled down, and an absolute maximum rating of 15 V (-0.3 V to 15 V). |
| 5 | VSS | power_in | Ground reference. |
| 6 | PACK | input | Analog input from the PACK+ terminal; recommended VPACK range is 0 V to 90 V, with an absolute maximum of 100 V when the charge pump is disabled. |
| 7 | DSG | output | Gate drive for the discharge FET; high-level gate drive voltage is 9 V to 14 V (12 V typical) with a 10 nF load. |
| 8 | CHG | output | Gate drive for the charge FET; high-level gate drive voltage is 9 V to 14 V (12 V typical) with a 10 nF load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sillumin |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| BAT, PACK voltage (charge pump disabled) | -0.3 | 100 | V | BAT, PACK (both under charge pump disabled condition) | 6 | ||
| Enable inputs voltage (CHG_EN, CP_EN, DSG_EN, PMON_EN, PCHG_EN) | -0.3 | 15 | V | 6 | |||
| CHG, DSG, PCHG, PACKDIV, VDDCP voltage | -0.3 | 105 | V | 6 | |||
| Junction temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage temperature | TS | -55 | 150 | °C | 6 | ||
| Functional temperature | TFUNC | -40 | 110 | °C | 6 | ||
| Battery cell input supply voltage range | VBAT | 8 | 90 | V | 6 | ||
| Charger/Load voltage range | VPACK | 0 | 90 | V | 6 | ||
| Enable input voltage range (CHG_EN, DSG_EN, PCHG_EN, PMON_EN, CP_EN) | VIN | 0 | 14 | V | 6 | ||
| Capacitor between VDDCP and BAT | CVDDCP | 470 | nF | 6 | |||
| Operating free-range temperature | TOPR | -40 | 85 | ℃ | 6 | ||
| Normal mode current | IBAT | 70 | µA | CVDDCP = 470nF, VBAT = 8V, CL = 10nF | 7 | ||
| Normal mode current | IBAT | 40 | µA | CVDDCP = 470nF, VBAT ≥ 48V CL= 10nF | 7 | ||
| Sum of current into BAT and PACK pin (shutdown) | ISHUT | 6 | 10 | µA | Shutdown mode, VPACK = 0V, VBAT = 8V | 7 | |
| Charge pump voltage | VVDDCP | 9 | 14 | V | No Load, CP_EN = high, VVDDCP -VBAT | 7 | |
| Charge pump start up time from zero voltage | tCPON | 50 | ms | CVDDCP = 470nF, 10% to 90% of VVDDCP | 7 | ||
| Digital low input level | VIL | 0.6 | V | 7 | |||
| Digital high input level | VIH | 1.2 | V | 7 | |||
| Internal pull down | RPD | 0.4 | 1 | 4 | MΩ | VIN = 5 V | 7 |
| CHG gate drive high voltage | VCHG_FET_ON | 9 | 12 | 14 | V | CL = 10nF, CHG_EN = High, VBAT = VPACK; VCHG, VBAT | 7 |
| CHG FET driver on resistance | RCHG_FET_ON | 0.5 | kΩ | VVDDCP, VBAT = 12 V, CHG_EN = High, VBAT = VPACK | 7 | ||
| CHG FET driver off resistance | RCHG_FET_OFF | 0.15 | kΩ | VVDDCP, VBAT = 12 V, CHG_EN = Low, VBAT = VPACK | 7 | ||
| DSG gate drive high voltage | VDSG_FET_ON | 9 | 12 | 14 | V | CL = 10nF, DSG_EN = High, VBAT = VPACK, VDSG, VPACK | 7 |
| DSG FET driver on resistance | RDSG_FET_ON | 1.5 | kΩ | VVDDCP, VBAT = 12 V, DSG_EN = High, VBAT = VPACK | 7 | ||
| DSG FET driver off resistance | RDSG_FET_OFF | 0.5 | kΩ | VVDDCP, VBAT = 12 V, DSG_EN = Low, VBAT = VPACK | 7 | ||
| CHG on rise time + propagation delay | tCHG_FET_ON | 14 | 23 | µs | CL= 10nF, (20% of CHG_EN from Low to High) to (80% of VCHG_FET_ON), CP_EN = High, CP is already on | 8 | |
| CHG off fall time + propagation delay | tCHG_FET_OFF | 4 | 10 | µs | CL= 10nF, (80% of CHG_EN from High to Low) to (20% of VCHG_FET_ON), CHG_EN = High to Low | 8 | |
| CHG EN to CHG output propagation delay | tPROP_CHG | 2.2 | µs | CL= 10nF, CP_EN = High, (CP is already on), see timing diagram | 8 | ||
| DSG on rise time + propagation delay | tDSG_FET_ON | 17 | 35 | µs | CL= 10nF, (20% of DSG_EN from Low to High) to (80% of VDSG_FET_ON), CP_EN = High, (CP is already on) | 8 | |
| DSG off fall time + propagation delay | tDSGFETOFF | 8 | 20 | µs | CL= 10nF, (80% of DSG_EN from High to Low) to (20% of VDSG_FET_ON) | 8 | |
| DSG EN to DSG output propagation delay | tPROP_DSG | 2.2 | µs | CL= 10nF, CP_EN = High, (CP already on), see timing Diagram | 8 |
CAD (KiCad official)
- Symbol:
SiLM2661CA-DG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
silm2661ca-dg-etched.step/silm2661ca-dg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);silm2661ca-dg.step/silm2661ca-dg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sillumin datasheet (18 pp, sha256
9a62db0d3b9a0e83, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SiLM2661CA-DG
**Sillumin** · Gate Drivers · SOP-8
SiLM2661CA-DG from Sillumin, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDDCP | power_out | Charge pump output; connect a minimum 470 nF capacitor between VDDCP and BAT and do not add any load on this pin. |
| 2 | BAT | power_in | Top of the battery stack; the battery cell input supply operates over 8 V to 90 V. |
| 3 | CHG_EN | input | Charge FET enable; digital input with VIL max 0.6 V and VIH min 1.2 V, internally pulled down, and an absolute maximum rating of 15 V (-0.3 V to 15 V). |
| 4 | DSG_EN | input | Discharge FET enable; digital input with VIL max 0.6 V and VIH min 1.2 V, internally pulled down, and an absolute maximum rating of 15 V (-0.3 V to 15 V). |
| 5 | VSS | power_in | Ground reference. |
| 6 | PACK | input | Analog input from the PACK+ terminal; recommended VPACK range is 0 V to 90 V, with an absolute maximum of 100 V when the charge pump is disabled. |
| 7 | DSG | output | Gate drive for the discharge FET; high-level gate drive voltage is 9 V to 14 V (12 V typical) with a 10 nF load. |
| 8 | CHG | output | Gate drive for the charge FET; high-level gate drive voltage is 9 V to 14 V (12 V typical) with a 10 nF load. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sillumin |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| BAT, PACK voltage (charge pump disabled) | | -0.3 | | 100 | V | BAT, PACK (both under charge pump disabled condition) | 6 |
| Enable inputs voltage (CHG_EN, CP_EN, DSG_EN, PMON_EN, PCHG_EN) | | -0.3 | | 15 | V | | 6 |
| CHG, DSG, PCHG, PACKDIV, VDDCP voltage | | -0.3 | | 105 | V | | 6 |
| Junction temperature | TJ | -40 | | 150 | °C | | 6 |
| Storage temperature | TS | -55 | | 150 | °C | | 6 |
| Functional temperature | TFUNC | -40 | | 110 | °C | | 6 |
| Battery cell input supply voltage range | VBAT | 8 | | 90 | V | | 6 |
| Charger/Load voltage range | VPACK | 0 | | 90 | V | | 6 |
| Enable input voltage range (CHG_EN, DSG_EN, PCHG_EN, PMON_EN, CP_EN) | VIN | 0 | | 14 | V | | 6 |
| Capacitor between VDDCP and BAT | CVDDCP | 470 | | | nF | | 6 |
| Operating free-range temperature | TOPR | -40 | | 85 | ℃ | | 6 |
| Normal mode current | IBAT | | | 70 | µA | CVDDCP = 470nF, VBAT = 8V, CL = 10nF | 7 |
| Normal mode current | IBAT | | | 40 | µA | CVDDCP = 470nF, VBAT ≥ 48V CL= 10nF | 7 |
| Sum of current into BAT and PACK pin (shutdown) | ISHUT | | 6 | 10 | µA | Shutdown mode, VPACK = 0V, VBAT = 8V | 7 |
| Charge pump voltage | VVDDCP | | 9 | 14 | V | No Load, CP_EN = high, VVDDCP -VBAT | 7 |
| Charge pump start up time from zero voltage | tCPON | | | 50 | ms | CVDDCP = 470nF, 10% to 90% of VVDDCP | 7 |
| Digital low input level | VIL | | | 0.6 | V | | 7 |
| Digital high input level | VIH | 1.2 | | | V | | 7 |
| Internal pull down | RPD | 0.4 | 1 | 4 | MΩ | VIN = 5 V | 7 |
| CHG gate drive high voltage | VCHG_FET_ON | 9 | 12 | 14 | V | CL = 10nF, CHG_EN = High, VBAT = VPACK; VCHG, VBAT | 7 |
| CHG FET driver on resistance | RCHG_FET_ON | | | 0.5 | kΩ | VVDDCP, VBAT = 12 V, CHG_EN = High, VBAT = VPACK | 7 |
| CHG FET driver off resistance | RCHG_FET_OFF | | | 0.15 | kΩ | VVDDCP, VBAT = 12 V, CHG_EN = Low, VBAT = VPACK | 7 |
| DSG gate drive high voltage | VDSG_FET_ON | 9 | 12 | 14 | V | CL = 10nF, DSG_EN = High, VBAT = VPACK, VDSG, VPACK | 7 |
| DSG FET driver on resistance | RDSG_FET_ON | | | 1.5 | kΩ | VVDDCP, VBAT = 12 V, DSG_EN = High, VBAT = VPACK | 7 |
| DSG FET driver off resistance | RDSG_FET_OFF | | | 0.5 | kΩ | VVDDCP, VBAT = 12 V, DSG_EN = Low, VBAT = VPACK | 7 |
| CHG on rise time + propagation delay | tCHG_FET_ON | | 14 | 23 | µs | CL= 10nF, (20% of CHG_EN from Low to High) to (80% of VCHG_FET_ON), CP_EN = High, CP is already on | 8 |
| CHG off fall time + propagation delay | tCHG_FET_OFF | | 4 | 10 | µs | CL= 10nF, (80% of CHG_EN from High to Low) to (20% of VCHG_FET_ON), CHG_EN = High to Low | 8 |
| CHG EN to CHG output propagation delay | tPROP_CHG | | | 2.2 | µs | CL= 10nF, CP_EN = High, (CP is already on), see timing diagram | 8 |
| DSG on rise time + propagation delay | tDSG_FET_ON | | 17 | 35 | µs | CL= 10nF, (20% of DSG_EN from Low to High) to (80% of VDSG_FET_ON), CP_EN = High, (CP is already on) | 8 |
| DSG off fall time + propagation delay | tDSGFETOFF | | 8 | 20 | µs | CL= 10nF, (80% of DSG_EN from High to Low) to (20% of VDSG_FET_ON) | 8 |
| DSG EN to DSG output propagation delay | tPROP_DSG | | | 2.2 | µs | CL= 10nF, CP_EN = High, (CP already on), see timing Diagram | 8 |
## CAD (KiCad official)
- Symbol: `SiLM2661CA-DG`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `silm2661ca-dg-etched.step` / `silm2661ca-dg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `silm2661ca-dg.step` / `silm2661ca-dg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Sillumin datasheet](docs/silm2661ca-dg-datasheet.pdf) (18 pp, sha256 `9a62db0d3b9a0e83`, retrieved 2026-11-04, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/silm2661ca-dg-datasheet.pdf)