main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers silm2661ca-dg: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
silm2661ca-dg-etched.glb Publish 0.1.0 · Ray
silm2661ca-dg-etched.step silm2661ca-dg: factory component page (tier=lcsc) · Ray
silm2661ca-dg-hero.glb silm2661ca-dg: hero GLB from the etched model (keeps the MPN mark) · Ray
silm2661ca-dg-hero.overlay.json Publish 0.1.0 · Ray
silm2661ca-dg.glb Publish 0.1.0 · Ray
silm2661ca-dg.kicad_mod Publish 0.1.0 · Ray
silm2661ca-dg.kicad_sym Publish 0.1.0 · Ray
silm2661ca-dg.lbr Publish 0.1.0 · Ray
silm2661ca-dg.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

SiLM2661CA-DG

Sillumin · Gate Drivers · SOP-8

SiLM2661CA-DG from Sillumin, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDDCP power_out Charge pump output; connect a minimum 470 nF capacitor between VDDCP and BAT and do not add any load on this pin.
2 BAT power_in Top of the battery stack; the battery cell input supply operates over 8 V to 90 V.
3 CHG_EN input Charge FET enable; digital input with VIL max 0.6 V and VIH min 1.2 V, internally pulled down, and an absolute maximum rating of 15 V (-0.3 V to 15 V).
4 DSG_EN input Discharge FET enable; digital input with VIL max 0.6 V and VIH min 1.2 V, internally pulled down, and an absolute maximum rating of 15 V (-0.3 V to 15 V).
5 VSS power_in Ground reference.
6 PACK input Analog input from the PACK+ terminal; recommended VPACK range is 0 V to 90 V, with an absolute maximum of 100 V when the charge pump is disabled.
7 DSG output Gate drive for the discharge FET; high-level gate drive voltage is 9 V to 14 V (12 V typical) with a 10 nF load.
8 CHG output Gate drive for the charge FET; high-level gate drive voltage is 9 V to 14 V (12 V typical) with a 10 nF load.

Key specifications

Parameter Value
Manufacturer Sillumin
Package SOP-8
Category Motor Driver ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
BAT, PACK voltage (charge pump disabled) -0.3 100 V BAT, PACK (both under charge pump disabled condition) 6
Enable inputs voltage (CHG_EN, CP_EN, DSG_EN, PMON_EN, PCHG_EN) -0.3 15 V 6
CHG, DSG, PCHG, PACKDIV, VDDCP voltage -0.3 105 V 6
Junction temperature TJ -40 150 °C 6
Storage temperature TS -55 150 °C 6
Functional temperature TFUNC -40 110 °C 6
Battery cell input supply voltage range VBAT 8 90 V 6
Charger/Load voltage range VPACK 0 90 V 6
Enable input voltage range (CHG_EN, DSG_EN, PCHG_EN, PMON_EN, CP_EN) VIN 0 14 V 6
Capacitor between VDDCP and BAT CVDDCP 470 nF 6
Operating free-range temperature TOPR -40 85 ℃ 6
Normal mode current IBAT 70 µA CVDDCP = 470nF, VBAT = 8V, CL = 10nF 7
Normal mode current IBAT 40 µA CVDDCP = 470nF, VBAT ≥ 48V CL= 10nF 7
Sum of current into BAT and PACK pin (shutdown) ISHUT 6 10 µA Shutdown mode, VPACK = 0V, VBAT = 8V 7
Charge pump voltage VVDDCP 9 14 V No Load, CP_EN = high, VVDDCP -VBAT 7
Charge pump start up time from zero voltage tCPON 50 ms CVDDCP = 470nF, 10% to 90% of VVDDCP 7
Digital low input level VIL 0.6 V 7
Digital high input level VIH 1.2 V 7
Internal pull down RPD 0.4 1 4 MΩ VIN = 5 V 7
CHG gate drive high voltage VCHG_FET_ON 9 12 14 V CL = 10nF, CHG_EN = High, VBAT = VPACK; VCHG, VBAT 7
CHG FET driver on resistance RCHG_FET_ON 0.5 kΩ VVDDCP, VBAT = 12 V, CHG_EN = High, VBAT = VPACK 7
CHG FET driver off resistance RCHG_FET_OFF 0.15 kΩ VVDDCP, VBAT = 12 V, CHG_EN = Low, VBAT = VPACK 7
DSG gate drive high voltage VDSG_FET_ON 9 12 14 V CL = 10nF, DSG_EN = High, VBAT = VPACK, VDSG, VPACK 7
DSG FET driver on resistance RDSG_FET_ON 1.5 kΩ VVDDCP, VBAT = 12 V, DSG_EN = High, VBAT = VPACK 7
DSG FET driver off resistance RDSG_FET_OFF 0.5 kΩ VVDDCP, VBAT = 12 V, DSG_EN = Low, VBAT = VPACK 7
CHG on rise time + propagation delay tCHG_FET_ON 14 23 µs CL= 10nF, (20% of CHG_EN from Low to High) to (80% of VCHG_FET_ON), CP_EN = High, CP is already on 8
CHG off fall time + propagation delay tCHG_FET_OFF 4 10 µs CL= 10nF, (80% of CHG_EN from High to Low) to (20% of VCHG_FET_ON), CHG_EN = High to Low 8
CHG EN to CHG output propagation delay tPROP_CHG 2.2 µs CL= 10nF, CP_EN = High, (CP is already on), see timing diagram 8
DSG on rise time + propagation delay tDSG_FET_ON 17 35 µs CL= 10nF, (20% of DSG_EN from Low to High) to (80% of VDSG_FET_ON), CP_EN = High, (CP is already on) 8
DSG off fall time + propagation delay tDSGFETOFF 8 20 µs CL= 10nF, (80% of DSG_EN from High to Low) to (20% of VDSG_FET_ON) 8
DSG EN to DSG output propagation delay tPROP_DSG 2.2 µs CL= 10nF, CP_EN = High, (CP already on), see timing Diagram 8

CAD (KiCad official)

  • Symbol: SiLM2661CA-DG
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: silm2661ca-dg-etched.step / silm2661ca-dg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); silm2661ca-dg.step / silm2661ca-dg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sillumin datasheet (18 pp, sha256 9a62db0d3b9a0e83, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF