main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers si5341b-d-gm: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
si5341b-d-gm-etched.glb Publish 0.1.0 · Ray
si5341b-d-gm-etched.step si5341b-d-gm: factory component page (tier=lcsc) · Ray
si5341b-d-gm-hero.glb si5341b-d-gm: hero GLB from the etched model (keeps the MPN mark) · Ray
si5341b-d-gm-hero.overlay.json Publish 0.1.0 · Ray
si5341b-d-gm.glb Publish 0.1.0 · Ray
si5341b-d-gm.kicad_mod Publish 0.1.0 · Ray
si5341b-d-gm.kicad_sym Publish 0.1.0 · Ray
si5341b-d-gm.lbr Publish 0.1.0 · Ray
si5341b-d-gm.step Publish 0.1.0 · Ray

SI5341B-D-GM

SILICON LABS · Clock Generators / Frequency Synthesizers / PLL · QFN-64-EP(9x9)

SI5341B-D-GM from SILICON LABS, in a QFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1 input Clock input IN1 accepts differential or single-ended clocks, is high-impedance and must be terminated externally.
2 IN1b input Complementary clock input IN1b of the IN1 pair, is high-impedance and must be terminated externally.
3 IN_SEL0 input Input reference select bit 0 that, with IN_SEL1, chooses the active clock input in manual pin-controlled mode; internally pulled up with ~20 kΩ to the IO_VDD_SEL-selected voltage.
4 IN_SEL1 input Input reference select bit 1 that, with IN_SEL0, chooses the active clock input in manual pin-controlled mode; internally pulled up with ~20 kΩ to the IO_VDD_SEL-selected voltage.
5 SYNCb input Active-low output clock synchronization input that resets the output dividers to re-align output clocks; internally pulled up with ~20 kΩ and may be left unconnected.
6 RSTb input Active-low device reset input that performs power-on reset, forces registers to default values and disables clock outputs during reset; internally pulled up with ~20 kΩ.
7 X1 input XTAL shield pin that must connect directly to the XTAL ground pins, must not be connected to the PCB ground plane, and is left disconnected when XA/XB is driven by an external clock.
8 XA input Crystal and external clock input of the XA/XB pair, selected when IN_SEL[1:0] = 11b, and may be left unconnected if unused and powered down.
9 XB input Complementary crystal and external clock input of the XA/XB pair, selected when IN_SEL[1:0] = 11b, and may be left unconnected if unused and powered down.
10 X2 input XTAL shield pin that must connect directly to the XTAL ground pins, must not be connected to the PCB ground plane, and is left disconnected when XA/XB is driven by an external clock.
11 OEb input Output enable input that disables all outputs when held high; internally pulled low and may be left unconnected.
12 INTRb output Interrupt output asserted low when a device status change occurs; push-pull output that may be left unconnected when not in use.
13 VDDA power_in Core supply pin that requires a 3.3 V power source, with a 1.0 µF bypass capacitor recommended.
14 IN2 input Clock input IN2 accepts differential or single-ended clocks, is high-impedance and must be terminated externally.
15 IN2b input Complementary clock input IN2b of the IN2 pair, is high-impedance and must be terminated externally.
16 SCLK input Serial clock input for I2C and SPI modes; internally pulled up with ~20 kΩ and requires an external pull-up of at least 1 kΩ in I2C mode.
17 A1/SDO bidirectional Address select A1 input in I2C mode with no internal pull-up or pull-down, and serial data output (SDO) in 4-wire SPI mode that drives high to the IO_VDD_SEL-selected voltage.
18 SDA/SDIO bidirectional Serial data pin (SDA) in I2C mode, which requires an external pull-up of at least 1 kΩ; SDIO in 3-wire SPI and SDI in 4-wire SPI, with no pull-up needed in SPI mode.
19 A0/CSb input Hardware address select A0 in I2C mode and active-low chip select in SPI mode; internally pulled up with ~20 kΩ to the IO_VDD_SEL-selected voltage.
20 RSVD unconnected Reserved pin connected to the die that must be left disconnected.
21 RSVD unconnected Reserved pin connected to the die that must be left disconnected.
22 VDDO0 power_in Output clock supply for OUT0 driver at 3.3 V, 2.5 V or 1.8 V; leave unconnected if the output driver is unused.
23 OUT0b output Complementary output clock 0 with programmable signal amplitude in differential mode; leave unconnected if unused.
24 OUT0 output Output clock 0 with programmable signal amplitude in differential mode; leave unconnected if unused.
25 FDEC input Frequency decrement input that steps down the output frequency of a selected output; internally pulled low with ~20 kΩ and may be left unconnected.
26 VDDO1 power_in Output clock supply for OUT1 driver at 3.3 V, 2.5 V or 1.8 V; leave unconnected if the output driver is unused.
27 OUT1b output Complementary output clock 1 with programmable signal amplitude in differential mode; leave unconnected if unused.
28 OUT1 output Output clock 1 with programmable signal amplitude in differential mode; leave unconnected if unused.
29 VDDO2 power_in Output clock supply for OUT2 driver at 3.3 V, 2.5 V or 1.8 V; leave unconnected if the output driver is unused.
30 OUT2b output Complementary output clock 2 with programmable signal amplitude in differential mode; leave unconnected if unused.
31 OUT2 output Output clock 2 with programmable signal amplitude in differential mode; leave unconnected if unused.
32 VDD power_in Core supply voltage that operates from a 1.8 V supply, with a 1.0 µF bypass capacitor recommended.
33 VDDO3 power_in Output clock supply for OUT3 driver at 3.3 V, 2.5 V or 1.8 V; leave unconnected if the output driver is unused.
34 OUT3b output Complementary output clock 3 with programmable signal amplitude in differential mode; leave unconnected if unused.
35 OUT3 output Output clock 3 with programmable signal amplitude in differential mode; leave unconnected if unused.
36 VDDO4 power_in Output clock supply for OUT4 driver at 3.3 V, 2.5 V or 1.8 V; leave unconnected if the output driver is unused.
37 OUT4b output Complementary output clock 4 with programmable signal amplitude in differential mode; leave unconnected if unused.
38 OUT4 output Output clock 4 with programmable signal amplitude in differential mode; leave unconnected if unused.
39 I2C_SEL input Serial interface mode select: I2C when high (I2C_SEL = 1) and SPI when low (I2C_SEL = 0); internally pulled up with ~20 kΩ to the IO_VDD_SEL-selected voltage.
40 VDDO5 power_in Output clock supply for OUT5 driver at 3.3 V, 2.5 V or 1.8 V; leave unconnected if the output driver is unused.
41 OUT5b output Complementary output clock 5 with programmable signal amplitude in differential mode; leave unconnected if unused.
42 OUT5 output Output clock 5 with programmable signal amplitude in differential mode; leave unconnected if unused.
43 VDDO6 power_in Output clock supply for OUT6 driver at 3.3 V, 2.5 V or 1.8 V; leave unconnected if the output driver is unused.
44 OUT6b output Complementary output clock 6 with programmable signal amplitude in differential mode; leave unconnected if unused.
45 OUT6 output Output clock 6 with programmable signal amplitude in differential mode; leave unconnected if unused.
46 VDD power_in Core supply voltage that operates from a 1.8 V supply, with a 1.0 µF bypass capacitor recommended.
47 LOLb output Loss of lock output that is high when the DSPLL is locked and low when out-of-lock; push-pull and needs no external pull-up or pull-down.
48 FINC input Frequency increment input that steps up the output frequency of a selected output; internally pulled low with ~20 kΩ and may be left unconnected.
49 VDDO7 power_in Output clock supply for OUT7 driver at 3.3 V, 2.5 V or 1.8 V; leave unconnected if the output driver is unused.
50 OUT7b output Complementary output clock 7 with programmable signal amplitude in differential mode; leave unconnected if unused.
51 OUT7 output Output clock 7 with programmable signal amplitude in differential mode; leave unconnected if unused.
52 VDDO8 power_in Output clock supply for OUT8 driver at 3.3 V, 2.5 V or 1.8 V; leave unconnected if the output driver is unused.
53 OUT8b output Complementary output clock 8 with programmable signal amplitude in differential mode; leave unconnected if unused.
54 OUT8 output Output clock 8 with programmable signal amplitude in differential mode; leave unconnected if unused.
55 RSVD unconnected Reserved pin connected to the die that must be left disconnected.
56 RSVD unconnected Reserved pin connected to the die that must be left disconnected.
57 VDDO9 power_in Output clock supply for OUT9 driver at 3.3 V, 2.5 V or 1.8 V; leave unconnected if the output driver is unused.
58 OUT9b output Complementary output clock 9 with programmable signal amplitude in differential mode; leave unconnected if unused.
59 OUT9 output Output clock 9 with programmable signal amplitude in differential mode; leave unconnected if unused.
60 VDD power_in Core supply voltage that operates from a 1.8 V supply, with a 1.0 µF bypass capacitor recommended.
61 FB_IN input External feedback input for the optional zero delay mode; may be left floating if unused and powered down.
62 FB_INb input Complementary external feedback input for the optional zero delay mode; may be left floating if unused and powered down.
63 IN0 input Clock input IN0 accepts differential or single-ended clocks, is high-impedance and must be terminated externally.
64 IN0b input Complementary clock input IN0b of the IN0 pair, is high-impedance and must be terminated externally.
65 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer SILICON LABS
Package QFN-64-EP(9x9)
Category Clock and Timing
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Temperature TA -40 25 85 °C 17
Junction Temperature TJMAX 125 °C 17
Core Supply Voltage VDD 1.71 1.8 1.89 V 17
Core Supply Voltage 3.3 V VDDA 3.14 3.3 3.47 V 17
Output Driver Supply Voltage (3.3 V row) VDDO 3.14 3.3 3.47 V 17
Output Driver Supply Voltage (2.5 V row) VDDO 2.37 2.5 2.62 V 17
Output Driver Supply Voltage (1.8 V row) VDDO 1.71 1.8 1.89 V 17
Core Supply Current IDD 115 230 mA Si5340/41 18
Core Analog Supply Current IDDA 120 130 mA Si5340/41 18
Output Buffer Supply Current (LVPECL output) IDDOx 22 26 mA LVPECL Output @ 156.25 MHz 18
Output Buffer Supply Current (LVDS output) IDDOx 15 18 mA LVDS Output @ 156.25 MHz 18
Output Buffer Supply Current (3.3 V LVCMOS output) IDDOx 22 30 mA 3.3 V LVCMOS output @ 156.25 MHz 18
Output Buffer Supply Current (2.5 V LVCMOS output) IDDOx 18 23 mA 2.5 V LVCMOS output @ 156.25 MHz 18
Output Buffer Supply Current (1.8 V LVCMOS output) IDDOx 12 16 mA 1.8 V LVCMOS output @ 156.25 MHz 18
Total Power Dissipation Pd 880 1150 mW Si5341; 7 x 2.5 V LVDS outputs enabled @ 156.25 MHz, excludes termination power 18
Input Frequency Range (differential) fIN 10 750 MHz Differential 19
Input Frequency Range (single-ended, including LVCMOS) fIN 10 250 MHz All single-ended signals (including LVCMOS) 19
Input Voltage Swing (differential AC-coupled) VIN 100 1800 mVpp_se Differential AC-coupled, fIN < 250 MHz 19
Input Voltage Swing (differential AC-coupled) VIN 225 1800 mVpp_se Differential AC-coupled, 250 MHz < fIN < 750 MHz 19
Input Voltage Swing (single-ended AC-coupled) VIN 100 3600 mVpp_se Single-ended AC-coupled, fIN < 250 MHz 19
Input Slew Rate (REFCLK, XA/XB) SR 400 V/μs Imposed for best jitter performance 19
Input Voltage Low (pulsed CMOS, IN0-IN2) VIL -0.2 0.4 V Pulsed CMOS Input Buffer - DC Coupled 19
Input Voltage High (pulsed CMOS, IN0-IN2) VIH 0.8 V Pulsed CMOS Input Buffer - DC Coupled 19
Minimum Pulse Width (pulsed CMOS input) PW 1.6 ns Pulse Input 19
REFCLK Input Frequency (full operating range) fIN 10 200 MHz Full operating range; jitter performance may be reduced 19
REFCLK Input Frequency (range for best jitter) fIN 48 54 MHz Range for best jitter 19
REFCLK Input Single-ended Voltage Swing VIN_SE 365 2000 mVpp_se 19
REFCLK Input Differential Voltage Swing VIN_DIFF 365 2500 mVpp_diff 19
REFCLK Input Duty Cycle DC 40 60 % 19
Frequency Update Rate FUR 1 MHz FINC and FDEC 20
LVCMOS Rise and Fall Time (20% to 80%) tr/tf 400 600 ps VDDO = 3.3 V, 20% to 80% 23
LVCMOS Rise and Fall Time (20% to 80%) tr/tf 450 600 ps VDDO = 2.5 V, 20% to 80% 23
LVCMOS Rise and Fall Time (20% to 80%) tr/tf 550 750 ps VDDO = 1.8 V, 20% to 80% 23
Initial Start-Up Time tSTART 30 45 ms Time from power-up to when device generates clocks (input frequency > 48 MHz) 24
PLL Lock Time tACQ 15 150 ms fIN = 19.44 MHz 24
Jitter Generation (locked to external clock, integer mode) JGEN 140 180 fs rms Locked to external clock; fIN = 100 MHz, fOUT = 156.25 MHz LVPECL; integer mode; 12 kHz to 20 MHz 25
Jitter Generation (locked to external clock, fractional/DCO mode) JGEN 160 210 fs rms Locked to external clock; fIN = 100 MHz, fOUT = 156.25 MHz LVPECL; fractional/DCO mode; 12 kHz to 20 MHz 25
Jitter Generation (locked to 48 MHz XTAL, integer mode) JGEN 90 140 fs rms Locked to external XTAL, XTAL = 48 MHz; integer mode; 12 kHz to 20 MHz 25
Jitter Generation (locked to 48 MHz XTAL, fractional/DCO mode) JGEN 115 170 fs rms Locked to external XTAL, XTAL = 48 MHz; fractional/DCO mode; 12 kHz to 20 MHz 25
SCLK Frequency (3-wire SPI) fSPI 20 MHz 29
SCLK Duty Cycle (3-wire SPI) TDC 40 60 % 29
SCLK Period (3-wire SPI) TC 50 ns 29
Delay Time, SCLK Fall to SDO Turn-on (3-wire SPI) TD1 12.5 20 ns 29
Crystal Frequency Range fXTAL 24.97 54.06 MHz Full operating range; jitter performance may be reduced 30
Crystal Frequency Range (best jitter) fXTAL 48 54 MHz Range for best jitter 30
Storage Temperature Range TSTG -55 150 °C 31
DC Supply Voltage (core) VDD -0.5 3.8 V 31
DC Supply Voltage (VDDA) VDDA -0.5 3.8 V 31
DC Supply Voltage (VDDO) VDDO -0.5 3.8 V 31
Input Voltage Range (IN0-IN2, FB_IN) VI1 -1 3.8 V IN0-IN2, FB_IN 31
Input Voltage Range (control pins) VI2 -0.5 3.8 V IN_SEL[1:0], RSTb, OEb, SYNCb, I2C_SEL, SDI, SCLK, A0/CSb, A1, SDA/SDIO, FINC/FDEC 31
Input Voltage Range (XA/XB) VI3 -0.5 2.7 V XA/XB 31
ESD Tolerance (HBM) 2 kV HBM 100 pF, 1.5 kΩ 31
Maximum Junction Temperature in Operation TJCT 125 °C 31
Soldering Temperature (Pb-free profile) TPEAK 260 °C 31
Thermal Resistance Junction to Ambient ϴJA 22 °C/W Still air; Si5341 64QFN; PCB 3 in x 4.5 in, 4-layer 30
Thermal Resistance Junction to Case ϴJC 9.5 °C/W Si5341 64QFN 30
Thermal Resistance Junction to Board ϴJB 9.4 °C/W Si5341 64QFN 30
Thermal Characterization Parameter Junction to Board ΨJB 9.3 °C/W Si5341 64QFN 30
Thermal Characterization Parameter Junction to Top Center ΨJT 0.2 °C/W Si5341 64QFN 30

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. 42

CAD (KiCad official)

  • Symbol: SI5341B-D-GM
  • Footprint: Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm
  • 3D model: QFN-64-EP(9x9) (KiCad packages3D, STEP)
  • 3D model files: si5341b-d-gm-etched.step / si5341b-d-gm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si5341b-d-gm.step / si5341b-d-gm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SILICON LABS datasheet (49 pp, sha256 0b243d92e50b9eae, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF