main
Ray
Publish 0.1.0
c10dadd
SI5335A-B07338-GM
SILICON LABS · Clock Generators / Frequency Synthesizers / PLL · QFN-24-EP(4x4)
SI5335A-B07338-GM from SILICON LABS, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XA/CLKIN | input | Main differential or single-ended clock input or XTAL input; must be ac-coupled, and single-ended input swing must be limited to 1.2 Vpp. |
| 2 | XB/CLKINB | input | Main differential or single-ended clock input or XTAL input; must be ac-coupled, and single-ended input swing must be limited to 1.2 Vpp. |
| 3 | P3 | input | 3.3 V tolerant multi-function input whose function (OEB_all, OEB0-3, SSENB or RESET) is selected at configuration with ClockBuilder. |
| 4 | GND | power_in | Ground; must be connected to system ground for proper device operation. |
| 5 | P5 | input | Multi-function input (OEB_all, OEB0-3 or SSENB) that needs a resistor divider when driven by a signal greater than 1.2 V. |
| 6 | P6 | input | Multi-function input (OEB_all, OEB0-3 or SSENB) that needs a resistor divider when driven by a signal greater than 1.2 V. |
| 7 | VDD | power_in | Core supply voltage of 1.8, 2.5 or 3.3 V, with a 0.1 µF bypass capacitor very close to the pin. |
| 8 | LOS | output | Open-drain loss-of-signal output (high = input clock absent or PLL not locked) that uses a typical 1-4 kΩ pullup to a supply as high as 3.6 V. |
| 9 | CLK3B | output | Output clock B for channel 3, single-ended or the other half of a differential pair with CLK3A; leave floating if unused. |
| 10 | CLK3A | output | Output clock A for channel 3, single-ended or the other half of a differential pair with CLK3B; leave floating if unused. |
| 11 | VDDO3 | power_in | Output supply (3.3, 2.5, 1.8 or 1.5 V) for CLK3A,B with a 0.1 µF capacitor very close; tie to VDD if CLK3 is unused. |
| 12 | P1 | input | 3.3 V tolerant multi-function input whose function (OEB_all, OEB0-3, SSENB, FS0, FS1 or RESET) is selected at configuration with ClockBuilder. |
| 13 | CLK2B | output | Output clock B for channel 2, single-ended or the other half of a differential pair with CLK2A; leave floating if unused. |
| 14 | CLK2A | output | Output clock A for channel 2, single-ended or the other half of a differential pair with CLK2B; leave floating if unused. |
| 15 | VDDO2 | power_in | Output supply (3.3, 2.5, 1.8 or 1.5 V) for CLK2A,B with a 0.1 µF capacitor very close; tie to VDD if CLK2 is unused. |
| 16 | VDDO1 | power_in | Output supply (3.3, 2.5, 1.8 or 1.5 V) for CLK1A,B with a 0.1 µF capacitor very close; tie to VDD if CLK1 is unused. |
| 17 | CLK1B | output | Output clock B for channel 1, single-ended or the other half of a differential pair with CLK1A; leave floating if unused. |
| 18 | CLK1A | output | Output clock A for channel 1, single-ended or the other half of a differential pair with CLK1B; leave floating if unused. |
| 19 | P2 | input | 3.3 V tolerant multi-function input whose function (OEB_all, OEB0-3, SSENB, FS1 or RESET) is selected at configuration with ClockBuilder. |
| 20 | VDDO0 | power_in | Output supply (3.3, 2.5, 1.8 or 1.5 V) for CLK0A,B with a 0.1 µF capacitor very close; tie to VDD if CLK0 is unused. |
| 21 | CLK0B | output | Output clock B for channel 0, single-ended or the other half of a differential pair with CLK0A; leave floating if unused. |
| 22 | CLK0A | output | Output clock A for channel 0, single-ended or the other half of a differential pair with CLK0B; leave floating if unused. |
| 23 | RSVD_GND | power_in | Ground; must be connected to system ground, minimizing ground path impedance. |
| 24 | VDD | power_in | Core supply voltage of 1.8, 2.5 or 3.3 V, with a 0.1 µF bypass capacitor very close to the pin. |
| 25 | GND_PAD | power_in | Center ground pad; the device will not function unless it is connected to a PCB ground plane with at least five vias. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SILICON LABS |
| Package | QFN-24-EP(4x4) |
| Category | Clock and Timing |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Temperature | TA | -40 | 25 | 85 | °C | 4 | |
| Core Supply Voltage | VDD | 2.97 | 3.3 | 3.63 | V | VDD = 3.3 V ±10% | 4 |
| Core Supply Voltage | VDD | 2.25 | 2.5 | 2.75 | V | VDD = 2.5 V ±10% | 4 |
| Core Supply Voltage | VDD | 1.71 | 1.8 | 1.98 | V | VDD = 1.8 V -5% to +10% | 4 |
| Output Buffer Supply Voltage | VDDOn | 1.4 | 3.63 | V | 4 | ||
| Core Supply Current (Clock Generator Mode) | IDDCG | 45 | 60 | mA | 100 MHz on all outputs, 25 MHz refclk, clock generator mode | 4 | |
| Output Buffer Supply Current | IDDOx | 30 | mA | LVPECL, 350 MHz | 4 | ||
| Output Buffer Supply Current | IDDOx | 8 | mA | LVDS, 350 MHz | 4 | ||
| Output Buffer Supply Current | IDDOx | 20 | mA | HCSL, 250 MHz, 2 pF load | 4 | ||
| Output Buffer Supply Current | IDDOx | 19 | mA | SSTL, 350 MHz | 4 | ||
| Output Buffer Supply Current | IDDOx | 6 | 9 | mA | CMOS, 50 MHz, 15 pF load; single CMOS driver active | 4 | |
| Output Buffer Supply Current | IDDOx | 13 | 18 | mA | CMOS, 200 MHz, 3.3 V VDD0; single CMOS driver active | 4 | |
| PLL Acquisition Time | tACQ | 25 | ms | 1.6 MHz loop bandwidth | 5 | ||
| PLL Tracking Range | fTRACK | 5000 | 20000 | ppm | 475 kHz or 1.6 MHz loop bandwidth | 5 | |
| MultiSynth Frequency Synthesis Resolution | fRES | 0 | 0 | 1 | ppb | Output frequency < Fvco/8 | 5 |
| CLKIN Loss of Signal Detect Time | tLOS | 2.6 | 5 | µs | 5 | ||
| CLKIN Loss of Signal Release Time | tLOSRLS | 0.01 | 0.2 | 1 | µs | 5 | |
| POR to Output Clock Valid | tRDY | 2 | ms | 5 | |||
| Input-to-Output Propagation Delay | tPROP | 2.5 | 4 | ns | Buffer Mode (PLL Bypass) | 5 | |
| Reset Minimum Pulse Width | tRESET | 200 | ns | 5 | |||
| Output-Output Skew | tDSKEW | 100 | ps | FOUT > 5 MHz | 5 | ||
| Spread Spectrum PP Frequency Deviation | SSDEV | -0.45 | -0.5 | % | FOUT = 100 MHz | 5 | |
| Spread Spectrum Modulation Rate | SSDEV | 30 | 31.5 | 33 | kHz | FOUT = 100 MHz | 5 |
| Output Clock Frequency (differential) | fOUT | 1 | 350 | MHz | LVPECL, LVDS, CML | 7 | |
| Output Clock Frequency (differential) | fOUT | 1 | 250 | MHz | HCSL | 7 | |
| LVPECL Peak-to-Peak Single-Ended Swing | VSEPP | 0.55 | 0.8 | 0.96 | VPP | LVPECL | 7 |
| LVDS Output Common Mode Voltage | VOC | 1.125 | 1.2 | 1.275 | V | LVDS, 2.5/3.3 V | 7 |
| LVDS Peak-to-Peak Single-Ended Swing | VSEPP | 0.25 | 0.35 | 0.45 | VPP | LVDS, 2.5/3.3 V | 7 |
| LVDS Output Common Mode Voltage | VOC | 0.8 | 0.875 | 0.95 | V | LVDS, 1.8 V | 7 |
| HCSL Output Common Mode Voltage | VOC | 0.35 | 0.375 | 0.4 | V | HCSL | 7 |
| HCSL Peak-to-Peak Single-Ended Swing | VSEPP | 0.575 | 0.725 | 0.85 | VPP | HCSL | 7 |
| CML Peak-to-Peak Single-Ended Swing | VSEPP | 0.67 | 0.86 | 1.07 | VPP | CML | 7 |
| Output Rise/Fall Time (20% to 80%) | tR/tF | 450 | ps | LVPECL, LVDS, HCSL, CML | 7 | ||
| Output Duty Cycle (differential) | DC | 45 | 55 | % | LVPECL, LVDS, HCSL, CML | 8 | |
| Output Clock Frequency (single-ended) | fOUT | 1 | 200 | MHz | CMOS | 8 | |
| Output Clock Frequency (single-ended) | fOUT | 1 | 350 | MHz | SSTL, HSTL | 8 | |
| CMOS Output Rise/Fall Time (20% to 80%) | tR/tF | 0.45 | 0.85 | ns | 2 pF load | 8 | |
| CMOS Output Rise/Fall Time (20% to 80%) | tR/tF | 2 | ns | 15 pF load | 8 | ||
| CMOS Output Voltage Low | VOL | 0.3 | V | 4 mA load | 8 | ||
| Output Duty Cycle (single-ended) | DC | 45 | 55 | % | 8 | ||
| Input Voltage Low | VIL | -0.1 | V | Pins P1, P2, P3 | 9 | ||
| Input Voltage Low | VIL | 0.3 | V | Pins P5 and P6 | 9 | ||
| Input Voltage High | VIH | 3.73 | V | Pins P1, P2, P3 | 9 | ||
| Input Voltage High | VIH | 0.85 | 1.2 | V | Pins P5 and P6 | 9 | |
| Output Voltage Low (LOS) | VOL | 0 | 0.4 | V | ISINK = 3 mA | 9 | |
| Crystal Output Capacitance (25 MHz) | cO | 5 | pF | 25 MHz crystal | 9 | ||
| Crystal Equivalent Series Resistance (25 MHz) | rESR | 100 | Ω | 25 MHz crystal | 9 | ||
| Crystal Max Drive Level (25 MHz) | dL | 100 | µW | 25 MHz crystal | 9 | ||
| Crystal Output Capacitance (27 MHz) | cO | 5 | pF | 27 MHz crystal | 9 | ||
| Crystal Equivalent Series Resistance (27 MHz) | rESR | 75 | Ω | 27 MHz crystal | 9 | ||
| Crystal Max Drive Level (27 MHz) | dL | 100 | µW | 27 MHz crystal | 9 | ||
| DC Supply Voltage | VDD | -0.5 | 3.8 | V | 15 | ||
| Input Voltage | VIN | -0.5 | 1.3 | V | Pins XA/CLKIN, XB/CLKINB, P5, P6 | 15 | |
| Input Voltage | VIN | -0.5 | 3.8 | V | Pins P1, P2, P3 | 15 | |
| Storage Temperature Range | TSTG | -55 | 150 | °C | 15 | ||
| Junction Temperature | TJ | 150 | °C | 15 | |||
| Thermal Resistance Junction to Ambient | JA | 37 | °C/W | Still Air | 14 | ||
| Thermal Resistance Junction to Case | JC | 25 | °C/W | Still Air | 14 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | 10. Gen 4 specifications based on the PCI-Express Base Specification 4.0 rev. 0.5. 11. Download the Silicon Labs PCIe Clock Jitter Tool at www.silabs.com/pcie-learningcenter. | 10 | |
| contacts | gold | 5. Terminal base alloy: Cu 6. Terminal plating/grid array material: Au/NiPd. | 42 |
CAD (KiCad official)
- Symbol:
SI5335A-B07338-GM - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
si5335a-b07338-gm-etched.step/si5335a-b07338-gm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);si5335a-b07338-gm.step/si5335a-b07338-gm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SILICON LABS datasheet (47 pp, sha256
e332299219a557cb, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SI5335A-B07338-GM
**SILICON LABS** · Clock Generators / Frequency Synthesizers / PLL · QFN-24-EP(4x4)
SI5335A-B07338-GM from SILICON LABS, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XA/CLKIN | input | Main differential or single-ended clock input or XTAL input; must be ac-coupled, and single-ended input swing must be limited to 1.2 Vpp. |
| 2 | XB/CLKINB | input | Main differential or single-ended clock input or XTAL input; must be ac-coupled, and single-ended input swing must be limited to 1.2 Vpp. |
| 3 | P3 | input | 3.3 V tolerant multi-function input whose function (OEB_all, OEB0-3, SSENB or RESET) is selected at configuration with ClockBuilder. |
| 4 | GND | power_in | Ground; must be connected to system ground for proper device operation. |
| 5 | P5 | input | Multi-function input (OEB_all, OEB0-3 or SSENB) that needs a resistor divider when driven by a signal greater than 1.2 V. |
| 6 | P6 | input | Multi-function input (OEB_all, OEB0-3 or SSENB) that needs a resistor divider when driven by a signal greater than 1.2 V. |
| 7 | VDD | power_in | Core supply voltage of 1.8, 2.5 or 3.3 V, with a 0.1 µF bypass capacitor very close to the pin. |
| 8 | LOS | output | Open-drain loss-of-signal output (high = input clock absent or PLL not locked) that uses a typical 1-4 kΩ pullup to a supply as high as 3.6 V. |
| 9 | CLK3B | output | Output clock B for channel 3, single-ended or the other half of a differential pair with CLK3A; leave floating if unused. |
| 10 | CLK3A | output | Output clock A for channel 3, single-ended or the other half of a differential pair with CLK3B; leave floating if unused. |
| 11 | VDDO3 | power_in | Output supply (3.3, 2.5, 1.8 or 1.5 V) for CLK3A,B with a 0.1 µF capacitor very close; tie to VDD if CLK3 is unused. |
| 12 | P1 | input | 3.3 V tolerant multi-function input whose function (OEB_all, OEB0-3, SSENB, FS0, FS1 or RESET) is selected at configuration with ClockBuilder. |
| 13 | CLK2B | output | Output clock B for channel 2, single-ended or the other half of a differential pair with CLK2A; leave floating if unused. |
| 14 | CLK2A | output | Output clock A for channel 2, single-ended or the other half of a differential pair with CLK2B; leave floating if unused. |
| 15 | VDDO2 | power_in | Output supply (3.3, 2.5, 1.8 or 1.5 V) for CLK2A,B with a 0.1 µF capacitor very close; tie to VDD if CLK2 is unused. |
| 16 | VDDO1 | power_in | Output supply (3.3, 2.5, 1.8 or 1.5 V) for CLK1A,B with a 0.1 µF capacitor very close; tie to VDD if CLK1 is unused. |
| 17 | CLK1B | output | Output clock B for channel 1, single-ended or the other half of a differential pair with CLK1A; leave floating if unused. |
| 18 | CLK1A | output | Output clock A for channel 1, single-ended or the other half of a differential pair with CLK1B; leave floating if unused. |
| 19 | P2 | input | 3.3 V tolerant multi-function input whose function (OEB_all, OEB0-3, SSENB, FS1 or RESET) is selected at configuration with ClockBuilder. |
| 20 | VDDO0 | power_in | Output supply (3.3, 2.5, 1.8 or 1.5 V) for CLK0A,B with a 0.1 µF capacitor very close; tie to VDD if CLK0 is unused. |
| 21 | CLK0B | output | Output clock B for channel 0, single-ended or the other half of a differential pair with CLK0A; leave floating if unused. |
| 22 | CLK0A | output | Output clock A for channel 0, single-ended or the other half of a differential pair with CLK0B; leave floating if unused. |
| 23 | RSVD_GND | power_in | Ground; must be connected to system ground, minimizing ground path impedance. |
| 24 | VDD | power_in | Core supply voltage of 1.8, 2.5 or 3.3 V, with a 0.1 µF bypass capacitor very close to the pin. |
| 25 | GND_PAD | power_in | Center ground pad; the device will not function unless it is connected to a PCB ground plane with at least five vias. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SILICON LABS |
| Package | QFN-24-EP(4x4) |
| Category | Clock and Timing |
| Pins | 25 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Temperature | TA | -40 | 25 | 85 | °C | | 4 |
| Core Supply Voltage | VDD | 2.97 | 3.3 | 3.63 | V | VDD = 3.3 V ±10% | 4 |
| Core Supply Voltage | VDD | 2.25 | 2.5 | 2.75 | V | VDD = 2.5 V ±10% | 4 |
| Core Supply Voltage | VDD | 1.71 | 1.8 | 1.98 | V | VDD = 1.8 V -5% to +10% | 4 |
| Output Buffer Supply Voltage | VDDOn | 1.4 | | 3.63 | V | | 4 |
| Core Supply Current (Clock Generator Mode) | IDDCG | | 45 | 60 | mA | 100 MHz on all outputs, 25 MHz refclk, clock generator mode | 4 |
| Output Buffer Supply Current | IDDOx | | | 30 | mA | LVPECL, 350 MHz | 4 |
| Output Buffer Supply Current | IDDOx | | | 8 | mA | LVDS, 350 MHz | 4 |
| Output Buffer Supply Current | IDDOx | | | 20 | mA | HCSL, 250 MHz, 2 pF load | 4 |
| Output Buffer Supply Current | IDDOx | | | 19 | mA | SSTL, 350 MHz | 4 |
| Output Buffer Supply Current | IDDOx | | 6 | 9 | mA | CMOS, 50 MHz, 15 pF load; single CMOS driver active | 4 |
| Output Buffer Supply Current | IDDOx | | 13 | 18 | mA | CMOS, 200 MHz, 3.3 V VDD0; single CMOS driver active | 4 |
| PLL Acquisition Time | tACQ | | | 25 | ms | 1.6 MHz loop bandwidth | 5 |
| PLL Tracking Range | fTRACK | 5000 | 20000 | | ppm | 475 kHz or 1.6 MHz loop bandwidth | 5 |
| MultiSynth Frequency Synthesis Resolution | fRES | 0 | 0 | 1 | ppb | Output frequency < Fvco/8 | 5 |
| CLKIN Loss of Signal Detect Time | tLOS | | 2.6 | 5 | µs | | 5 |
| CLKIN Loss of Signal Release Time | tLOSRLS | 0.01 | 0.2 | 1 | µs | | 5 |
| POR to Output Clock Valid | tRDY | | | 2 | ms | | 5 |
| Input-to-Output Propagation Delay | tPROP | | 2.5 | 4 | ns | Buffer Mode (PLL Bypass) | 5 |
| Reset Minimum Pulse Width | tRESET | | | 200 | ns | | 5 |
| Output-Output Skew | tDSKEW | | | 100 | ps | FOUT > 5 MHz | 5 |
| Spread Spectrum PP Frequency Deviation | SSDEV | | -0.45 | -0.5 | % | FOUT = 100 MHz | 5 |
| Spread Spectrum Modulation Rate | SSDEV | 30 | 31.5 | 33 | kHz | FOUT = 100 MHz | 5 |
| Output Clock Frequency (differential) | fOUT | 1 | | 350 | MHz | LVPECL, LVDS, CML | 7 |
| Output Clock Frequency (differential) | fOUT | 1 | | 250 | MHz | HCSL | 7 |
| LVPECL Peak-to-Peak Single-Ended Swing | VSEPP | 0.55 | 0.8 | 0.96 | VPP | LVPECL | 7 |
| LVDS Output Common Mode Voltage | VOC | 1.125 | 1.2 | 1.275 | V | LVDS, 2.5/3.3 V | 7 |
| LVDS Peak-to-Peak Single-Ended Swing | VSEPP | 0.25 | 0.35 | 0.45 | VPP | LVDS, 2.5/3.3 V | 7 |
| LVDS Output Common Mode Voltage | VOC | 0.8 | 0.875 | 0.95 | V | LVDS, 1.8 V | 7 |
| HCSL Output Common Mode Voltage | VOC | 0.35 | 0.375 | 0.4 | V | HCSL | 7 |
| HCSL Peak-to-Peak Single-Ended Swing | VSEPP | 0.575 | 0.725 | 0.85 | VPP | HCSL | 7 |
| CML Peak-to-Peak Single-Ended Swing | VSEPP | 0.67 | 0.86 | 1.07 | VPP | CML | 7 |
| Output Rise/Fall Time (20% to 80%) | tR/tF | | | 450 | ps | LVPECL, LVDS, HCSL, CML | 7 |
| Output Duty Cycle (differential) | DC | 45 | | 55 | % | LVPECL, LVDS, HCSL, CML | 8 |
| Output Clock Frequency (single-ended) | fOUT | 1 | | 200 | MHz | CMOS | 8 |
| Output Clock Frequency (single-ended) | fOUT | 1 | | 350 | MHz | SSTL, HSTL | 8 |
| CMOS Output Rise/Fall Time (20% to 80%) | tR/tF | | 0.45 | 0.85 | ns | 2 pF load | 8 |
| CMOS Output Rise/Fall Time (20% to 80%) | tR/tF | | | 2 | ns | 15 pF load | 8 |
| CMOS Output Voltage Low | VOL | | | 0.3 | V | 4 mA load | 8 |
| Output Duty Cycle (single-ended) | DC | 45 | | 55 | % | | 8 |
| Input Voltage Low | VIL | -0.1 | | | V | Pins P1, P2, P3 | 9 |
| Input Voltage Low | VIL | | | 0.3 | V | Pins P5 and P6 | 9 |
| Input Voltage High | VIH | | | 3.73 | V | Pins P1, P2, P3 | 9 |
| Input Voltage High | VIH | 0.85 | | 1.2 | V | Pins P5 and P6 | 9 |
| Output Voltage Low (LOS) | VOL | 0 | | 0.4 | V | ISINK = 3 mA | 9 |
| Crystal Output Capacitance (25 MHz) | cO | | | 5 | pF | 25 MHz crystal | 9 |
| Crystal Equivalent Series Resistance (25 MHz) | rESR | | | 100 | Ω | 25 MHz crystal | 9 |
| Crystal Max Drive Level (25 MHz) | dL | 100 | | | µW | 25 MHz crystal | 9 |
| Crystal Output Capacitance (27 MHz) | cO | | | 5 | pF | 27 MHz crystal | 9 |
| Crystal Equivalent Series Resistance (27 MHz) | rESR | | | 75 | Ω | 27 MHz crystal | 9 |
| Crystal Max Drive Level (27 MHz) | dL | 100 | | | µW | 27 MHz crystal | 9 |
| DC Supply Voltage | VDD | -0.5 | | 3.8 | V | | 15 |
| Input Voltage | VIN | -0.5 | | 1.3 | V | Pins XA/CLKIN, XB/CLKINB, P5, P6 | 15 |
| Input Voltage | VIN | -0.5 | | 3.8 | V | Pins P1, P2, P3 | 15 |
| Storage Temperature Range | TSTG | -55 | | 150 | °C | | 15 |
| Junction Temperature | TJ | | | 150 | °C | | 15 |
| Thermal Resistance Junction to Ambient | JA | | 37 | | °C/W | Still Air | 14 |
| Thermal Resistance Junction to Case | JC | | 25 | | °C/W | Still Air | 14 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | | 10. Gen 4 specifications based on the PCI-Express Base Specification 4.0 rev. 0.5. 11. Download the Silicon Labs PCIe Clock Jitter Tool at www.silabs.com/pcie-learningcenter. | 10 |
| contacts | | gold | 5. Terminal base alloy: Cu 6. Terminal plating/grid array material: Au/NiPd. | 42 |
## CAD (KiCad official)
- Symbol: `SI5335A-B07338-GM`
- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`
- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files: `si5335a-b07338-gm-etched.step` / `si5335a-b07338-gm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `si5335a-b07338-gm.step` / `si5335a-b07338-gm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SILICON LABS datasheet](docs/si5335a-b07338-gm-datasheet.pdf) (47 pp, sha256 `e332299219a557cb`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/si5335a-b07338-gm-datasheet.pdf)