Generated by kicad-footprint-generator · KiCad file format 20260206
SI53304-B-GMR
SILICON LABS · Clock Buffers, Drivers · QFN-32-EP(5x5)
SI53304-B-GMR from SILICON LABS, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE0 | input | Output enable for Output 0: high enables Q0, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor. |
| 2 | SFOUTA[1] | input | Bank A output signal format control bit 1, a three-level input internally biased at VDD/2 that may be left floating or tied to GND or VDD. |
| 3 | SFOUTA[0] | input | Bank A output signal format control bit 0, a three-level input internally biased at VDD/2 that may be left floating or tied to GND or VDD. |
| 4 | Q0b | output | Output clock 0 (complement). |
| 5 | Q0 | output | Output clock 0. |
| 6 | GND | power_in | Ground. |
| 7 | VDD | power_in | Core voltage supply; bypass with 1.0 µF capacitor placed as close to the VDD pin as possible. |
| 8 | CLK_SEL | input | Mux input select (LVCMOS): high selects CLK1, low selects CLK0, with glitchless switching and an internal pull-down resistor. |
| 9 | OE1 | input | Output enable for Output 1: high enables Q1, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor. |
| 10 | CLK0 | input | Input clock 0. |
| 11 | CLK0b | input | Input clock 0 (complement); connect to VDD/2 when CLK0 is driven single-ended. |
| 12 | OE2 | input | Output enable for Output 2: high enables Q2, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor. |
| 13 | OE3 | input | Output enable for Output 3: high enables Q3, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor. |
| 14 | CLK1 | input | Input clock 1. |
| 15 | CLK1b | input | Input clock 1 (complement); connect to VDD/2 when CLK1 is driven single-ended. |
| 16 | OE4 | input | Output enable for Output 4: high enables Q4, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor. |
| 17 | VREF | power_in | Reference voltage output (see section 2.3 Voltage Reference). |
| 18 | VDDOA | power_in | Output voltage supply for Bank A (Q0 to Q2); bypass with 1.0 µF capacitor placed as close to the VDDOA pin as possible. |
| 19 | VDDOB | power_in | Output voltage supply for Bank B (Q3 to Q5); bypass with 1.0 µF capacitor placed as close to the VDDOB pin as possible. |
| 20 | Q5b | output | Output clock 5 (complement). |
| 21 | Q5 | output | Output clock 5. |
| 22 | SFOUTB[0] | input | Bank B output signal format control bit 0, a three-level input internally biased at VDD/2 that may be left floating or tied to GND or VDD. |
| 23 | SFOUTB[1] | input | Bank B output signal format control bit 1, a three-level input internally biased at VDD/2 that may be left floating or tied to GND or VDD. |
| 24 | OE5 | input | Output enable for Output 5: high enables Q5, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor. |
| 25 | Q4b | output | Output clock 4 (complement). |
| 26 | Q4 | output | Output clock 4. |
| 27 | Q3b | output | Output clock 3 (complement). |
| 28 | Q3 | output | Output clock 3. |
| 29 | Q2b | output | Output clock 2 (complement). |
| 30 | Q2 | output | Output clock 2. |
| 31 | Q1b | output | Output clock 1 (complement). |
| 32 | Q1 | output | Output clock 1. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SILICON LABS |
| Package | QFN-32-EP(5x5) |
| Category | RTC/Clock Chip |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | TA | -40 | 85 | °C | 19 | ||
| Supply Voltage Range | VDD | 1.71 | 1.8 | 1.89 | V | LVDS, CML | 19 |
| Supply Voltage Range | VDD | 2.38 | 2.5 | 2.63 | V | LVDS, CML | 19 |
| Supply Voltage Range | VDD | 2.97 | 3.3 | 3.63 | V | LVDS, CML | 19 |
| Output Buffer Supply Voltage | VDDOX | 1.71 | 1.8 | 1.89 | V | LVDS, CML, LVCMOS | 19 |
| Output Buffer Supply Voltage | VDDOX | 2.38 | 2.5 | 2.63 | V | LVDS, CML, LVCMOS | 19 |
| Output Buffer Supply Voltage | VDDOX | 2.97 | 3.3 | 3.63 | V | LVDS, CML, LVCMOS | 19 |
| Differential Input Common Mode Voltage | VCM | 0.05 | V | VDD = 2.5 V ± 5%, 3.3 V ± 10% | 19 | ||
| Differential Input Swing (peak-to-peak) | VIN | 0.2 | 2.2 | V | 19 | ||
| Supply Current | IDD | 65 | 100 | mA | 20 | ||
| Single-Ended Output Swing (LVPECL) | VSE | 0.55 | 0.8 | 1.05 | V | 21 | |
| Single-Ended Output Swing (Low Power LVPECL) | VSE | 0.25 | 0.6 | 0.85 | V | RL = 100 Ω across Qn and Qn | 21 |
| Single-Ended Output Swing (CML) | VSE | 300 | 400 | 550 | mV | Terminated as shown in Figure 2.9 (CML termination) | 21 |
| Single-Ended Output Swing (LVDS) | VSE | 247 | 490 | mV | RL = 100 Ω across QN and QN | 22 | |
| Output Common Mode Voltage (VDDO = 2.5 V or 3.3 V) | VCOM1 | 1.1 | 1.25 | 1.35 | V | VDDOX = 2.38 to 2.63 V, 2.97 to 3.63 V, RL = 100 Ω across QN and QN | 22 |
| Output Common Mode Voltage (VDDO = 1.8 V) | VCOM2 | 0.85 | 0.97 | 1.25 | V | VDDOX = 1.71 to 1.89 V, RL = 100 Ω across QN and QN | 22 |
| Output Voltage High (HCSL) | VOH | 550 | 700 | 900 | mV | RL = 50 Ω to GND | 22 |
| Output Voltage Low (HCSL) | VOL | -150 | 0 | 150 | mV | RL = 50 Ω to GND | 22 |
| Single-Ended Output Swing (HCSL) | VSE | 550 | 700 | 850 | mV | RL = 50 Ω to GND | 22 |
| Crossing Voltage (HCSL) | VC | 250 | 350 | 550 | mV | RL = 50 Ω to GND | 22 |
| Frequency | F | 1 | 725 | MHz | LVPECL, low power LVPECL, LVDS, CML, HCSL | 23 | |
| Frequency | F | 1 | 200 | MHz | LVCMOS | 23 | |
| Duty Cycle | DC | 40 | 50 | 60 | % | 200 MHz, 20/80% TR/TF<10% of period (LVCMOS) (12 mA drive) | 23 |
| Duty Cycle | DC | 48 | 50 | 52 | % | 80% TR/TF<10% of period (Differential) | 23 |
| Minimum Input Clock Slew Rate | SR | 0.75 | V/ns | Required to meet prop delay and additive jitter specifications (20-80%) | 23 | ||
| Output Rise/Fall Time (LVDS) | TR/TF | 325 | ps | LVDS, 20/80% | 23 | ||
| Output Rise/Fall Time (LVPECL) | TR/TF | 350 | ps | LVPECL, 20/80% | 23 | ||
| Output Rise/Fall Time (HCSL) | TR/TF | 280 | ps | HCSL, 20/80% | 23 | ||
| Output Rise/Fall Time (CML) | TR/TF | 350 | ps | CML, 20/80% | 23 | ||
| Output Rise/Fall Time (Low-Power LVPECL) | TR/TF | 350 | ps | Low-Power LVPECL, 20/80% | 23 | ||
| Output Rise/Fall Time (LVCMOS) | TR/TF | 750 | ps | LVCMOS 200 MHz, 20/80%, 2 pF load | 23 | ||
| Minimum Input Pulse Width | TW | 500 | ps | 23 | |||
| Propagation Delay (LVCMOS) | TPLH, TPHL | 1250 | 2000 | 2750 | ps | LVCMOS (12 mA drive with no load) | 23 |
| Propagation Delay (LVPECL) | TPLH, TPHL | 600 | 800 | 1000 | ps | LVPECL, Si53301/2/3/4/5/8 | 23 |
| Propagation Delay (LVDS) | TPLH, TPHL | 600 | 800 | 1000 | ps | LVDS, Si53301/2/3/4/5/8 | 23 |
| Output to Output Skew (LVCMOS) | TSK | 50 | 120 | ps | LVCMOS (12 mA drive to no load) | 24 | |
| Output to Output Skew (LVPECL) | TSK | 35 | 75 | ps | LVPECL | 24 | |
| Output to Output Skew (LVDS) | TSK | 35 | 85 | ps | LVDS | 24 | |
| Part to Part Skew | TPS | 150 | ps | Differential | 24 | ||
| Additive Jitter (single-ended clock input, 12 kHz to 20 MHz) | 120 | 160 | fs rms | VDD 3.3 V; 200 MHz; single-ended input 1.70 V/ns; LVCMOS output, 12 mA drive | 26 | ||
| Additive Jitter (single-ended clock input, 12 kHz to 20 MHz) | 160 | 185 | fs rms | VDD 3.3 V; 156.25 MHz; single-ended input 2.18 V/ns; LVPECL output | 26 | ||
| Additive Jitter (single-ended clock input, 12 kHz to 20 MHz) | 150 | 200 | fs rms | VDD 3.3 V; 156.25 MHz; single-ended input 2.18 V/ns; LVDS output | 26 | ||
| Additive Jitter (single-ended clock input, 12 kHz to 20 MHz) | 130 | 180 | fs rms | VDD 3.3 V; 156.25 MHz; single-ended input 2.18 V/ns; LVCMOS output, 12 mA drive | 26 | ||
| Thermal Resistance, Junction to Ambient (5x5 mm QFN) | θJA | 50.3 | °C/W | Still air | 27 | ||
| Thermal Resistance, Junction to Case (5x5 mm QFN) | θJC | 10.3 | °C/W | Still air | 27 | ||
| Thermal Resistance, Junction to Board (5x5 mm QFN) | θJB | 30.9 | °C/W | Still air | 27 | ||
| Storage Temperature | TS | -55 | 150 | °C | 27 | ||
| Supply Voltage | VDD | -0.5 | 3.8 | V | 27 | ||
| ESD Sensitivity HBM | 2000 | V | HBM, 100 pF, 1.5 kΩ | 27 | |||
| ESD Sensitivity CDM | 500 | V | 27 | ||||
| Peak Soldering Reflow Temperature | TPEAK | 260 | °C | Pb-Free; solder reflow profile per JEDEC J-STD-020 | 27 | ||
| Maximum Junction Temperature | TJ | 125 | °C | 27 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. | 60 |
CAD (KiCad official)
- Symbol:
SI53304-B-GMR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
si53304-b-gmr-etched.step/si53304-b-gmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);si53304-b-gmr.step/si53304-b-gmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SILICON LABS datasheet (68 pp, sha256
4d316334eb492a02, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).