Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SI53304-B-GMR

SILICON LABS · Clock Buffers, Drivers · QFN-32-EP(5x5)

SI53304-B-GMR from SILICON LABS, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE0 input Output enable for Output 0: high enables Q0, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor.
2 SFOUTA[1] input Bank A output signal format control bit 1, a three-level input internally biased at VDD/2 that may be left floating or tied to GND or VDD.
3 SFOUTA[0] input Bank A output signal format control bit 0, a three-level input internally biased at VDD/2 that may be left floating or tied to GND or VDD.
4 Q0b output Output clock 0 (complement).
5 Q0 output Output clock 0.
6 GND power_in Ground.
7 VDD power_in Core voltage supply; bypass with 1.0 µF capacitor placed as close to the VDD pin as possible.
8 CLK_SEL input Mux input select (LVCMOS): high selects CLK1, low selects CLK0, with glitchless switching and an internal pull-down resistor.
9 OE1 input Output enable for Output 1: high enables Q1, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor.
10 CLK0 input Input clock 0.
11 CLK0b input Input clock 0 (complement); connect to VDD/2 when CLK0 is driven single-ended.
12 OE2 input Output enable for Output 2: high enables Q2, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor.
13 OE3 input Output enable for Output 3: high enables Q3, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor.
14 CLK1 input Input clock 1.
15 CLK1b input Input clock 1 (complement); connect to VDD/2 when CLK1 is driven single-ended.
16 OE4 input Output enable for Output 4: high enables Q4, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor.
17 VREF power_in Reference voltage output (see section 2.3 Voltage Reference).
18 VDDOA power_in Output voltage supply for Bank A (Q0 to Q2); bypass with 1.0 µF capacitor placed as close to the VDDOA pin as possible.
19 VDDOB power_in Output voltage supply for Bank B (Q3 to Q5); bypass with 1.0 µF capacitor placed as close to the VDDOB pin as possible.
20 Q5b output Output clock 5 (complement).
21 Q5 output Output clock 5.
22 SFOUTB[0] input Bank B output signal format control bit 0, a three-level input internally biased at VDD/2 that may be left floating or tied to GND or VDD.
23 SFOUTB[1] input Bank B output signal format control bit 1, a three-level input internally biased at VDD/2 that may be left floating or tied to GND or VDD.
24 OE5 input Output enable for Output 5: high enables Q5, low holds Q low and Qb high for differential formats (both low for LVCMOS); contains an internal pull-up resistor.
25 Q4b output Output clock 4 (complement).
26 Q4 output Output clock 4.
27 Q3b output Output clock 3 (complement).
28 Q3 output Output clock 3.
29 Q2b output Output clock 2 (complement).
30 Q2 output Output clock 2.
31 Q1b output Output clock 1 (complement).
32 Q1 output Output clock 1.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer SILICON LABS
Package QFN-32-EP(5x5)
Category RTC/Clock Chip
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Operating Temperature TA -40 85 °C 19
Supply Voltage Range VDD 1.71 1.8 1.89 V LVDS, CML 19
Supply Voltage Range VDD 2.38 2.5 2.63 V LVDS, CML 19
Supply Voltage Range VDD 2.97 3.3 3.63 V LVDS, CML 19
Output Buffer Supply Voltage VDDOX 1.71 1.8 1.89 V LVDS, CML, LVCMOS 19
Output Buffer Supply Voltage VDDOX 2.38 2.5 2.63 V LVDS, CML, LVCMOS 19
Output Buffer Supply Voltage VDDOX 2.97 3.3 3.63 V LVDS, CML, LVCMOS 19
Differential Input Common Mode Voltage VCM 0.05 V VDD = 2.5 V ± 5%, 3.3 V ± 10% 19
Differential Input Swing (peak-to-peak) VIN 0.2 2.2 V 19
Supply Current IDD 65 100 mA 20
Single-Ended Output Swing (LVPECL) VSE 0.55 0.8 1.05 V 21
Single-Ended Output Swing (Low Power LVPECL) VSE 0.25 0.6 0.85 V RL = 100 Ω across Qn and Qn 21
Single-Ended Output Swing (CML) VSE 300 400 550 mV Terminated as shown in Figure 2.9 (CML termination) 21
Single-Ended Output Swing (LVDS) VSE 247 490 mV RL = 100 Ω across QN and QN 22
Output Common Mode Voltage (VDDO = 2.5 V or 3.3 V) VCOM1 1.1 1.25 1.35 V VDDOX = 2.38 to 2.63 V, 2.97 to 3.63 V, RL = 100 Ω across QN and QN 22
Output Common Mode Voltage (VDDO = 1.8 V) VCOM2 0.85 0.97 1.25 V VDDOX = 1.71 to 1.89 V, RL = 100 Ω across QN and QN 22
Output Voltage High (HCSL) VOH 550 700 900 mV RL = 50 Ω to GND 22
Output Voltage Low (HCSL) VOL -150 0 150 mV RL = 50 Ω to GND 22
Single-Ended Output Swing (HCSL) VSE 550 700 850 mV RL = 50 Ω to GND 22
Crossing Voltage (HCSL) VC 250 350 550 mV RL = 50 Ω to GND 22
Frequency F 1 725 MHz LVPECL, low power LVPECL, LVDS, CML, HCSL 23
Frequency F 1 200 MHz LVCMOS 23
Duty Cycle DC 40 50 60 % 200 MHz, 20/80% TR/TF<10% of period (LVCMOS) (12 mA drive) 23
Duty Cycle DC 48 50 52 % 80% TR/TF<10% of period (Differential) 23
Minimum Input Clock Slew Rate SR 0.75 V/ns Required to meet prop delay and additive jitter specifications (20-80%) 23
Output Rise/Fall Time (LVDS) TR/TF 325 ps LVDS, 20/80% 23
Output Rise/Fall Time (LVPECL) TR/TF 350 ps LVPECL, 20/80% 23
Output Rise/Fall Time (HCSL) TR/TF 280 ps HCSL, 20/80% 23
Output Rise/Fall Time (CML) TR/TF 350 ps CML, 20/80% 23
Output Rise/Fall Time (Low-Power LVPECL) TR/TF 350 ps Low-Power LVPECL, 20/80% 23
Output Rise/Fall Time (LVCMOS) TR/TF 750 ps LVCMOS 200 MHz, 20/80%, 2 pF load 23
Minimum Input Pulse Width TW 500 ps 23
Propagation Delay (LVCMOS) TPLH, TPHL 1250 2000 2750 ps LVCMOS (12 mA drive with no load) 23
Propagation Delay (LVPECL) TPLH, TPHL 600 800 1000 ps LVPECL, Si53301/2/3/4/5/8 23
Propagation Delay (LVDS) TPLH, TPHL 600 800 1000 ps LVDS, Si53301/2/3/4/5/8 23
Output to Output Skew (LVCMOS) TSK 50 120 ps LVCMOS (12 mA drive to no load) 24
Output to Output Skew (LVPECL) TSK 35 75 ps LVPECL 24
Output to Output Skew (LVDS) TSK 35 85 ps LVDS 24
Part to Part Skew TPS 150 ps Differential 24
Additive Jitter (single-ended clock input, 12 kHz to 20 MHz) 120 160 fs rms VDD 3.3 V; 200 MHz; single-ended input 1.70 V/ns; LVCMOS output, 12 mA drive 26
Additive Jitter (single-ended clock input, 12 kHz to 20 MHz) 160 185 fs rms VDD 3.3 V; 156.25 MHz; single-ended input 2.18 V/ns; LVPECL output 26
Additive Jitter (single-ended clock input, 12 kHz to 20 MHz) 150 200 fs rms VDD 3.3 V; 156.25 MHz; single-ended input 2.18 V/ns; LVDS output 26
Additive Jitter (single-ended clock input, 12 kHz to 20 MHz) 130 180 fs rms VDD 3.3 V; 156.25 MHz; single-ended input 2.18 V/ns; LVCMOS output, 12 mA drive 26
Thermal Resistance, Junction to Ambient (5x5 mm QFN) θJA 50.3 °C/W Still air 27
Thermal Resistance, Junction to Case (5x5 mm QFN) θJC 10.3 °C/W Still air 27
Thermal Resistance, Junction to Board (5x5 mm QFN) θJB 30.9 °C/W Still air 27
Storage Temperature TS -55 150 °C 27
Supply Voltage VDD -0.5 3.8 V 27
ESD Sensitivity HBM 2000 V HBM, 100 pF, 1.5 kΩ 27
ESD Sensitivity CDM 500 V 27
Peak Soldering Reflow Temperature TPEAK 260 °C Pb-Free; solder reflow profile per JEDEC J-STD-020 27
Maximum Junction Temperature TJ 125 °C 27

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC 4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020 specification for Small Body Components. 60

CAD (KiCad official)

  • Symbol: SI53304-B-GMR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: si53304-b-gmr-etched.step / si53304-b-gmr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); si53304-b-gmr.step / si53304-b-gmr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SILICON LABS datasheet (68 pp, sha256 4d316334eb492a02, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF