main
Ray si512: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) fb3041b
{
  "slug": "si512",
  "version": "0.1.0",
  "type": "component",
  "description": "Nanjing Zhongke Microelectronics RFID ICs, QFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rf and wireless",
    "si512",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "si512.kicad_sym",
    "si512.kicad_mod",
    "si512.glb",
    "si512.step",
    "si512.lbr",
    "docs/hero.png",
    "docs/si512-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "Si512",
    "manufacturer": "Nanjing Zhongke Microelectronics",
    "package": "QFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "RF And Wireless",
    "subcategory": "RFID ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920144693506048",
    "parts": {
      "symbol": "si512.kicad_sym",
      "footprint": "si512.kicad_mod",
      "model_3d": "si512-etched.glb",
      "model_3d_plain": "si512.glb",
      "model_3d_step": "si512-etched.step",
      "model_3d_step_plain": "si512.step",
      "lbr": "si512.lbr"
    },
    "distributor_links": {
      "lcsc": "C2916909"
    },
    "pins": [
      {
        "number": "1",
        "name": "SDI",
        "type": "input",
        "description": "I2C bus serial data input."
      },
      {
        "number": "2",
        "name": "PVDD",
        "type": "power_in",
        "description": "Pad power supply pin, 2.3 to 3.6 V."
      },
      {
        "number": "3",
        "name": "DVDD",
        "type": "power_in",
        "description": "Digital power supply pin, 2.3 to 3.6 V."
      },
      {
        "number": "4",
        "name": "DVSS",
        "type": "power_in",
        "description": "Digital ground pin."
      },
      {
        "number": "5",
        "name": "PVSS",
        "type": "power_in",
        "description": "Pad power supply ground pin."
      },
      {
        "number": "6",
        "name": "NRSTPD",
        "type": "input",
        "description": "Not reset and power down; LOW switches off oscillator and current sinks, positive edge initiates reset."
      },
      {
        "number": "7",
        "name": "MFIN",
        "type": "input",
        "description": "Communication interface input accepting digital serial data stream."
      },
      {
        "number": "8",
        "name": "MFOUT",
        "type": "output",
        "description": "Communication interface output delivering serial data stream."
      },
      {
        "number": "9",
        "name": "SVDD",
        "type": "power_in",
        "description": "Power supply for MFIN/MFOUT pads, 2.3 to 3.6 V."
      },
      {
        "number": "10",
        "name": "TVSS",
        "type": "power_in",
        "description": "Transmitter ground supplying output stage of TX1 and TX2."
      },
      {
        "number": "11",
        "name": "TX1",
        "type": "output",
        "description": "Transmitter 1 output delivering modulated 13.56 MHz energy carrier."
      },
      {
        "number": "12",
        "name": "TVDD",
        "type": "power_in",
        "description": "Transmitter power supply for TX1 and TX2 output stage, 2.3 to 3.6 V."
      },
      {
        "number": "13",
        "name": "TX2",
        "type": "output",
        "description": "Transmitter 2 output delivering modulated 13.56 MHz energy carrier."
      },
      {
        "number": "14",
        "name": "TVSS",
        "type": "power_in",
        "description": "Transmitter ground supplying output stage of TX1 and TX2."
      },
      {
        "number": "15",
        "name": "AVDD",
        "type": "power_in",
        "description": "Analog power supply pin, 2.3 to 3.6 V."
      },
      {
        "number": "16",
        "name": "VMID",
        "type": "power_in",
        "description": "Internal reference voltage output pin."
      },
      {
        "number": "17",
        "name": "RX",
        "type": "input",
        "description": "Receiver input for RF field detection at 13.56 MHz."
      },
      {
        "number": "18",
        "name": "AVSS",
        "type": "power_in",
        "description": "Analog ground pin."
      },
      {
        "number": "19",
        "name": "AUX1",
        "type": "output",
        "description": "Auxiliary output pin used for testing and monitoring."
      },
      {
        "number": "20",
        "name": "AUX2",
        "type": "output",
        "description": "Auxiliary output pin used for testing and monitoring."
      },
      {
        "number": "21",
        "name": "OSCIN",
        "type": "input",
        "description": "Crystal oscillator input to inverting amplifier; accepts 27.12 MHz external clock."
      },
      {
        "number": "22",
        "name": "OSCOUT",
        "type": "output",
        "description": "Crystal oscillator output from inverting amplifier."
      },
      {
        "number": "23",
        "name": "IRQ",
        "type": "output",
        "description": "Interrupt request output signaling interrupt event to host controller."
      },
      {
        "number": "24",
        "name": "SD/NSS/RX",
        "type": "bidirectional",
        "description": "Multiplexed pin: I2C SDA (serial data), SPI NSS (chip select), or UART RX (receive address) depending on interface type."
      },
      {
        "number": "25",
        "name": "D1/ADR_5",
        "type": "bidirectional",
        "description": "Multiplexed pin: test port D1 or I2C bus address bit 5 input depending on interface type."
      },
      {
        "number": "26",
        "name": "D2/ADR_4",
        "type": "bidirectional",
        "description": "Multiplexed pin: test port D2 or I2C bus address bit 4 input depending on interface type."
      },
      {
        "number": "27",
        "name": "D3/ADR_3",
        "type": "bidirectional",
        "description": "Multiplexed pin: test port D3 or I2C bus address bit 3 input depending on interface type."
      },
      {
        "number": "28",
        "name": "D4/ADR_2",
        "type": "bidirectional",
        "description": "Multiplexed pin: test port D4 or I2C bus address bit 2 input depending on interface type."
      },
      {
        "number": "29",
        "name": "D5/ADR_1/SCK/DTRQ",
        "type": "bidirectional",
        "description": "Multiplexed pin: test port D5, I2C address bit 1, SPI serial clock, or UART handshake request depending on interface type."
      },
      {
        "number": "30",
        "name": "D6/ADR_0/MOSI/MX",
        "type": "bidirectional",
        "description": "Multiplexed pin: test port D6, I2C address bit 0, SPI master-out-slave-in, or UART controller output depending on interface type."
      },
      {
        "number": "31",
        "name": "D7/SCL/MISO/TX",
        "type": "bidirectional",
        "description": "Multiplexed pin: test port D7, I2C serial clock, SPI master-in-slave-out, or UART data output depending on interface type."
      },
      {
        "number": "32",
        "name": "EA",
        "type": "input",
        "description": "External address input pin to configure I2C slave address at power-up or reset."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 10 and 14 (TVSS) have identical names and functions; datasheet repeats transmitter ground conne; Pins 24-31 are multiplexed between UART, SPI, I2C, and test functions; actual function depends on au",
          "exposed pad 33 added from the footprint"
        ],
        "pages_sent": 134,
        "cost_usd": 0.8408,
        "at": "2026-09-17T22:01:41"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920144693506048",
        "pages": 134,
        "sha256": "bf6bea380f15b758",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "si512.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "si512-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "55d0a69ec8a1e17efd916361915cb1e366959e0611bdd16dc2d9dd5ee4bb2fa8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}