main
Ray
Publish 0.1.2
e37e3b4
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181
{
"slug": "sgm6130yps8g",
"version": "0.1.2",
"type": "component",
"description": "SGMICRO DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"sgm6130yps8g"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"sgm6130yps8g.kicad_sym",
"sgm6130yps8g.kicad_mod",
"sgm6130yps8g.glb",
"sgm6130yps8g.step",
"sgm6130yps8g.lbr",
"docs/hero.png",
"docs/sgm6130yps8g-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"sgm6130yps8g-etched.step",
"sgm6130yps8g-etched.glb",
"sgm6130yps8g-hero.glb",
"sgm6130yps8g-hero.overlay.json"
],
"visibility": "public",
"author": {
"name": "Ray"
},
"component": {
"mpn": "SGM6130YPS8G",
"manufacturer": "SGMICRO",
"package": "SOIC-8-EP",
"pin_count": 9,
"category": "DC-DC Converters",
"parts": {
"symbol": "sgm6130yps8g.kicad_sym",
"footprint": "sgm6130yps8g.kicad_mod",
"model_3d": "sgm6130yps8g-hero.glb",
"model_3d_plain": "sgm6130yps8g.glb",
"model_3d_step": "sgm6130yps8g-etched.step",
"model_3d_step_plain": "sgm6130yps8g.step",
"lbr": "sgm6130yps8g.lbr"
},
"pins": [
{
"number": "1",
"name": "BS",
"type": "input",
"description": "High-side gate drive boost input. Supplies the bootstrap voltage for the internal high-side N-channel MOSFET. Connect a 10nF (or greater) capacitor from SW to BS; a 10Ω series resistor between SW and the BS cap is strongly recommended to reduce SW spike voltage."
},
{
"number": "2",
"name": "IN",
"type": "power_in",
"description": "Power input. Supplies the IC and the step-down converter switch. Drive with a 4.5V to 28.5V source and bypass to GND with a sufficiently large (e.g. 22µF ceramic) capacitor."
},
{
"number": "3",
"name": "SW",
"type": "power_out",
"description": "Power switching output. Switching node that supplies power to the output LC filter. Also serves as the reference for the BS bootstrap capacitor."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground return for the IC. The exposed pad on the backside of the package must be connected to pin 4 and to the GND plane."
},
{
"number": "5",
"name": "FB",
"type": "input",
"description": "Feedback input. Regulated to an internal 0.8V reference. Connect to a resistor divider between the output and GND to program the output voltage (VOUT = 0.8V × (1 + R2/R3))."
},
{
"number": "6",
"name": "COMP",
"type": "output",
"description": "Loop compensation node. Connect a series RC network from COMP to GND to compensate the regulation control loop; in some cases an additional shunt capacitor from COMP to GND is required."
},
{
"number": "7",
"name": "EN",
"type": "input",
"description": "Enable digital input. Drive high to turn the regulator on, drive low to turn it off (output is discharged when off). Leave unconnected for automatic start-up. Absolute maximum -0.3V to 6V."
},
{
"number": "8",
"name": "SS",
"type": "input",
"description": "Soft-start control input. Connect a capacitor from SS to GND to program the soft-start period; a 0.1µF capacitor sets ~10ms. Leave unconnected to disable the external soft-start (internal soft-start still active)."
},
{
"number": "9",
"name": "EP",
"type": "power_in",
"description": "Exposed thermal pad on backside of package. Power ground; must be connected to pin 4 and to the GND plane for proper electrical operation and heat dissipation (θJA ≈ 50°C/W)."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
"cad": "KiCad official (CC-BY-SA 4.0)",
"cad_basis": {
"from": [
"README CAD section (factory cad_wording)",
".kicad_mod model path agrees"
],
"missing": []
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:16:32Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "sgm6130yps8g.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "sgm6130yps8g-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "b6e0252992c81c8a75f9a3fc753c83df069d97e4a63084aa6c2149fd29c47a94",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"org": "adom"
}