main
Ray Publish 0.1.2 e37e3b4
{
  "slug": "sgm6130yps8g",
  "version": "0.1.2",
  "type": "component",
  "description": "SGMICRO DC-DC Converters, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "sgm6130yps8g"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sgm6130yps8g.kicad_sym",
    "sgm6130yps8g.kicad_mod",
    "sgm6130yps8g.glb",
    "sgm6130yps8g.step",
    "sgm6130yps8g.lbr",
    "docs/hero.png",
    "docs/sgm6130yps8g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sgm6130yps8g-etched.step",
    "sgm6130yps8g-etched.glb",
    "sgm6130yps8g-hero.glb",
    "sgm6130yps8g-hero.overlay.json"
  ],
  "component": {
    "mpn": "SGM6130YPS8G",
    "manufacturer": "SGMICRO",
    "package": "SOIC-8-EP",
    "pin_count": 9,
    "category": "DC-DC Converters",
    "parts": {
      "symbol": "sgm6130yps8g.kicad_sym",
      "footprint": "sgm6130yps8g.kicad_mod",
      "model_3d": "sgm6130yps8g-hero.glb",
      "model_3d_plain": "sgm6130yps8g.glb",
      "model_3d_step": "sgm6130yps8g-etched.step",
      "model_3d_step_plain": "sgm6130yps8g.step",
      "lbr": "sgm6130yps8g.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "BS",
        "type": "input",
        "description": "High-side gate drive boost input. Supplies the bootstrap voltage for the internal high-side N-channel MOSFET. Connect a 10nF (or greater) capacitor from SW to BS; a 10Ω series resistor between SW and the BS cap is strongly recommended to reduce SW spike voltage."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Power input. Supplies the IC and the step-down converter switch. Drive with a 4.5V to 28.5V source and bypass to GND with a sufficiently large (e.g. 22µF ceramic) capacitor."
      },
      {
        "number": "3",
        "name": "SW",
        "type": "power_out",
        "description": "Power switching output. Switching node that supplies power to the output LC filter. Also serves as the reference for the BS bootstrap capacitor."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground return for the IC. The exposed pad on the backside of the package must be connected to pin 4 and to the GND plane."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input. Regulated to an internal 0.8V reference. Connect to a resistor divider between the output and GND to program the output voltage (VOUT = 0.8V × (1 + R2/R3))."
      },
      {
        "number": "6",
        "name": "COMP",
        "type": "output",
        "description": "Loop compensation node. Connect a series RC network from COMP to GND to compensate the regulation control loop; in some cases an additional shunt capacitor from COMP to GND is required."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "Enable digital input. Drive high to turn the regulator on, drive low to turn it off (output is discharged when off). Leave unconnected for automatic start-up. Absolute maximum -0.3V to 6V."
      },
      {
        "number": "8",
        "name": "SS",
        "type": "input",
        "description": "Soft-start control input. Connect a capacitor from SS to GND to program the soft-start period; a 0.1µF capacitor sets ~10ms. Leave unconnected to disable the external soft-start (internal soft-start still active)."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed thermal pad on backside of package. Power ground; must be connected to pin 4 and to the GND plane for proper electrical operation and heat dissipation (θJA ≈ 50°C/W)."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:16:32Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "sgm6130yps8g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sgm6130yps8g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b6e0252992c81c8a75f9a3fc753c83df069d97e4a63084aa6c2149fd29c47a94",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}