SGM61220XTN6G

{
  "slug": "sgm61220xtn6g",
  "version": "0.1.0",
  "type": "component",
  "description": "SGMICRO DC-DC Converters, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "sgm61220xtn6g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sgm61220xtn6g.kicad_sym",
    "sgm61220xtn6g.kicad_mod",
    "sgm61220xtn6g.glb",
    "sgm61220xtn6g.step",
    "sgm61220xtn6g.lbr",
    "docs/hero.png",
    "docs/sgm61220xtn6g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sgm61220xtn6g-hero.glb",
    "sgm61220xtn6g-hero.overlay.json",
    "sgm61220xtn6g-etched.glb"
  ],
  "component": {
    "mpn": "SGM61220XTN6G",
    "manufacturer": "SGMICRO",
    "package": "TSOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589837316744650752",
    "parts": {
      "symbol": "sgm61220xtn6g.kicad_sym",
      "footprint": "sgm61220xtn6g.kicad_mod",
      "model_3d": "sgm61220xtn6g-hero.glb",
      "model_3d_plain": "sgm61220xtn6g-etched.glb",
      "model_3d_step": "sgm61220xtn6g-etched.step",
      "model_3d_step_plain": "sgm61220xtn6g.step",
      "lbr": "sgm61220xtn6g.lbr"
    },
    "distributor_links": {
      "lcsc": "C5153610"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T06:09:33Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference pin."
      },
      {
        "number": "2",
        "name": "SW",
        "type": "output",
        "description": "Switching node at the junction of the internal lower and upper power MOSFETs; connect to the output inductor and the bootstrap capacitor, with SW voltage rated -0.1V to 28V in recommended operation."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin that powers the control circuitry and power converter over 4.5V to 28V, with high-frequency ceramic decoupling placed as close as possible between VIN and GND and input under-voltage protected by UVLO."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback sense pin for output voltage programming, normally regulated at 0.603V, with a recommended FB voltage range of -0.1V to 3V."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable pin: the device operates when EN is high and shuts down when low, is enabled if left floating, and can be used to set the UVLO thresholds; recommended EN voltage is -0.1V to 5.5V."
      },
      {
        "number": "6",
        "name": "BOOT",
        "type": "output",
        "description": "Bootstrap pin for the high-side gate drive; place a 0.1µF capacitor between BOOT and SW close to the device with no series resistor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ordering table lists the orderable part as SGM61220XTN6G/TR (Tape and Reel, 3000), while the MPN; The pin-configuration diagram text in the extracted datasheet is jumbled, so the pin numbers were ta"
        ],
        "pages_sent": 17,
        "cost_usd": 0.0606,
        "at": "2026-10-18T06:04:12"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589837316744650752",
        "pages": 17,
        "sha256": "d2487e959afe4bd0",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sgm61220xtn6g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1007b8f67a3e81e2c5182bfd1fd27afe4d8d3710e0bfa1a14b8a91db8b595eb5",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sgm61220xtn6g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "277978ba78bd000c45e11b4e9f3d87d36b7093f70411dce05fd3c031cf4d0133",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}